收藏切换
Analysis of Mechanical Properties of Interface Bonding Layer Based on Assembled Bridges
收藏切换
PDF
Jian-gang QIAO, En-qian HU, Rui TAO*, Hai-yang YANG
Science Technology and Engineering | 2025, 25(10) : 4326 - 4333
Less
收藏切换
Science Technology and Engineering | 2025, 25(10): 4326-4333
Papers·Traffics and Transportations
Analysis of Mechanical Properties of Interface Bonding Layer Based on Assembled Bridges
Full
Jian-gang QIAO, En-qian HU, Rui TAO*, Hai-yang YANG
Affiliations
  • School of Civil Engineering and Transprotation, Hebei University of Technoloy, Tianjin 300401, China
Published: 2025-04-08 doi: 10.12404/j.issn.1671-1815.2403384
Outline
收藏切换

In order to ensure the safety and reliability of the structural connection of assembled bridges, the strength test design of different types of interface agents was carried out based on bridge engineering and structural mechanics, and the mechanical properties of different cement grades, water-cement ratio and ash-sand ratio were analyzed. The change law of the strength of cement mortar in the early stage is faster than that in the later stage. The change law of the compressive strength of different types of interface agents with different ages was obtained, the prediction model of the relationship between different ages and strength of cement mortar was constructed, and the optimal mechanical properties of SS-III were proposed from the perspective of the bending-compression ratio. The relationship between different interface agents and the tensile strength of adhesion splitting was tested and analyzed by developing the test device of adhesion splitting tensile strength. The bonding performance of SS-III was determined to be the best interface bonding agent for assembled bridges from the perspective of the bending ratio and bonding properties. cement mortar as the interface agent for assembled bridges is more reasonable, which provides a new research idea for the safety and reliability analysis of the interface connection of assembled bridges.

assembled bridges  /  interface agent  /  mechanical properties  /  compression ratio  /  adhesive properties
Jian-gang QIAO, En-qian HU, Rui TAO, Hai-yang YANG. Analysis of Mechanical Properties of Interface Bonding Layer Based on Assembled Bridges[J]. Science Technology and Engineering, 2025 , 25 (10) : 4326 -4333 . DOI: 10.12404/j.issn.1671-1815.2403384
Year 2025 volume 25 Issue 10
PDF
176
85
Cite this Article
BibTeX
Article Info
doi: 10.12404/j.issn.1671-1815.2403384
  • Receive Date:2024-05-08
  • Online Date:2026-01-12
  • Published:2025-04-08
Article Data
Affiliations
History
  • Received:2024-05-08
  • Revised:2025-01-03
Funding
Affiliations
    School of Civil Engineering and Transprotation, Hebei University of Technoloy, Tianjin 300401, China
References
Share
https://castjournals.cast.org.cn/joweb/kxjsygc/EN/10.12404/j.issn.1671-1815.2403384
Share to
QR

Scan QR to access full text

Cite this article
BibTeX
Citations
表12种不同金属材料的力学参数

Family
属数
Number of
genus
种数
Number of
species
占总种数比例
Percentage of
total species (%)

Genus
种数
Number of
species
占总种数比例
Percentage of total
species (%)
鹅膏菌科Amanitaceae 2 11 5.26 鹅膏菌属 Amanita 10 4.78
小菇科 Mycenaceae 2 12 5.74 丝盖伞属 Inocybe 5 2.39
多孔菌科 Polyporaceae 8 14 6.70 蜡蘑属 Laccaria 5 2.39
红菇科 Russulaceae 3 23 11.00 小皮伞属 Marasmius 6 2.87
小菇属 Mycena 11 5.26
光柄菇属 Pluteus 5 2.39
红菇属 Russula 17 8.13
栓菌属 Trametes 5 2.39
关闭全屏
  • BibTeX
  • EndNote
  • RefWorks
  • TxT