收藏切换
Tooth Surface Design and Dynamic Characteristics Analysis of Helical Non-circular Gear with Point Contact
收藏切换
PDF
Dong LIANG, Yu-pei CAO, Xiang-yang XU, Han-jie JIA, Ze-yin HE
Science Technology and Engineering | 2025, 25(4) : 1458 - 1466
Less
收藏切换
Science Technology and Engineering | 2025, 25(4): 1458-1466
Papers·Mechanical and Instrumental Industry
Tooth Surface Design and Dynamic Characteristics Analysis of Helical Non-circular Gear with Point Contact
Full
Dong LIANG, Yu-pei CAO, Xiang-yang XU, Han-jie JIA, Ze-yin HE
Affiliations
  • School of Mechatronics and Vehicle Engineering, Chongqing Jiaotong University, Chongqing 400074, China
Published: 2025-02-08 doi: 10.12404/j.issn.1671-1815.2309535
Outline
收藏切换

To further improve the transmission performance of non-circular gear pair, a new helical non-circular gear with point contact was proposed based on the meshing principle of gears. Mathematical model of helical non-circular gear with point contact was constructed. Geometric kinematic relationships between the pitch curve and tooth profile curve for helical non-circular gear with point contact under spatial coordinate system were deduced. Tooth surface design of the gear was completed. Three-dimensional solid models of helical non-circular gear pair with point contact was established by using the convert-tooth shape method. The dynamic simulation model of helical non-circular gear with point contact was established. The dynamic meshing forces of the new gear pair and general involute non-circular gear pair under the same conditions were analyzed. Meshing characteristics of helical non-circular gear with point contact under different working conditions were also obtained. The tooth surface contact state and contact stress of point contact non-circular gear and involute non-circular gear under the same parameter and working condition were compared and analyzed. Research results provide an important theoretical support and reference value for the design and application of non-circular gear pair.

non-circular gear  /  point contact  /  pitch curve  /  tooth surface design  /  dynamic simulation
Dong LIANG, Yu-pei CAO, Xiang-yang XU, Han-jie JIA, Ze-yin HE. Tooth Surface Design and Dynamic Characteristics Analysis of Helical Non-circular Gear with Point Contact[J]. Science Technology and Engineering, 2025 , 25 (4) : 1458 -1466 . DOI: 10.12404/j.issn.1671-1815.2309535
Year 2025 volume 25 Issue 4
PDF
332
129
Cite this Article
BibTeX
Article Info
doi: 10.12404/j.issn.1671-1815.2309535
  • Receive Date:2023-12-04
  • Online Date:2025-07-29
  • Published:2025-02-08
Article Data
Affiliations
History
  • Received:2023-12-04
  • Revised:2024-11-06
Funding
Affiliations
    School of Mechatronics and Vehicle Engineering, Chongqing Jiaotong University, Chongqing 400074, China
References
Share
https://castjournals.cast.org.cn/joweb/kxjsygc/EN/10.12404/j.issn.1671-1815.2309535
Share to
QR

Scan QR to access full text

Cite this article
BibTeX
Citations
表12种不同金属材料的力学参数

Family
属数
Number of
genus
种数
Number of
species
占总种数比例
Percentage of
total species (%)

Genus
种数
Number of
species
占总种数比例
Percentage of total
species (%)
鹅膏菌科Amanitaceae 2 11 5.26 鹅膏菌属 Amanita 10 4.78
小菇科 Mycenaceae 2 12 5.74 丝盖伞属 Inocybe 5 2.39
多孔菌科 Polyporaceae 8 14 6.70 蜡蘑属 Laccaria 5 2.39
红菇科 Russulaceae 3 23 11.00 小皮伞属 Marasmius 6 2.87
小菇属 Mycena 11 5.26
光柄菇属 Pluteus 5 2.39
红菇属 Russula 17 8.13
栓菌属 Trametes 5 2.39
关闭全屏
  • BibTeX
  • EndNote
  • RefWorks
  • TxT