收藏切换
Effect of Fan-shaped Nozzle Structure Optimization on Jet Impact Force Based on Response Surface Analysis
收藏切换
PDF
Wen-guang LIU1, Xin-jian ZHOU1, Qi-cai LI2, Wei GAO2, Hao YANG1
Science Technology and Engineering | 2025, 25(4) : 1467 - 1474
Less
收藏切换
Science Technology and Engineering | 2025, 25(4): 1467-1474
Papers·Mechanical and Instrumental Industry
Effect of Fan-shaped Nozzle Structure Optimization on Jet Impact Force Based on Response Surface Analysis
Full
Wen-guang LIU1, Xin-jian ZHOU1, Qi-cai LI2, Wei GAO2, Hao YANG1
Affiliations
  • 1 School of Mechanical Engineering, Inner Mongolia University of Science and Technology, Baotou 014010, China
  • 2 Aifuci (Tianjin) Metallurgical Equipment Co., Ltd., Tianjin 301701, China
Published: 2025-02-08 doi: 10.12404/j.issn.1671-1815.2402207
Outline
收藏切换

Fan nozzle is an important part of high pressure water descaling system, and its internal structure parameters directly affect the performance of jet. The nozzle flow field was analyzed by using fluid simulation software FLUENT, and the nozzle exit diameter, cone section contraction angle and exit contraction angle were selected as reference factors. The jet impact force was used as evaluation index, and the nozzle structure parameters were optimized by response surface method. The results show that the velocity distribution of the internal flow field is affected by the single factor of the diameter of the outlet section and the conical contraction angle, but the flow rate of the nozzle is little affected. The pressure drop of nozzle is affected by the change of the diameter of outlet section and the contraction angle of nozzle outlet, and the influence of the contraction angle of nozzle conical section on the pressure drop is negligible. When the diameter of the outlet section is 3.15 mm, the taper shrinking angle is 26.17°, and the outlet shrinking angle is 40.93°, it is found that the nozzle striking force is increased from the original 94.91 N to the optimized 143 N by establishing the outflow field and applying the gas-liquid two-phase flow model simulation calculation. The research results provide theoretical guidance for optimizing nozzle structure to enhance jet impact force.

response surface optimization  /  fan nozzle  /  high pressure water descaling  /  central compound test
Wen-guang LIU, Xin-jian ZHOU, Qi-cai LI, Wei GAO, Hao YANG. Effect of Fan-shaped Nozzle Structure Optimization on Jet Impact Force Based on Response Surface Analysis[J]. Science Technology and Engineering, 2025 , 25 (4) : 1467 -1474 . DOI: 10.12404/j.issn.1671-1815.2402207
Year 2025 volume 25 Issue 4
PDF
423
187
Cite this Article
BibTeX
Article Info
doi: 10.12404/j.issn.1671-1815.2402207
  • Receive Date:2024-03-28
  • Online Date:2025-07-29
  • Published:2025-02-08
Article Data
Affiliations
History
  • Received:2024-03-28
  • Revised:2024-11-25
Funding
Affiliations
    1 School of Mechanical Engineering, Inner Mongolia University of Science and Technology, Baotou 014010, China
    2 Aifuci (Tianjin) Metallurgical Equipment Co., Ltd., Tianjin 301701, China
References
Share
https://castjournals.cast.org.cn/joweb/kxjsygc/EN/10.12404/j.issn.1671-1815.2402207
Share to
QR

Scan QR to access full text

Cite this article
BibTeX
Citations
表12种不同金属材料的力学参数

Family
属数
Number of
genus
种数
Number of
species
占总种数比例
Percentage of
total species (%)

Genus
种数
Number of
species
占总种数比例
Percentage of total
species (%)
鹅膏菌科Amanitaceae 2 11 5.26 鹅膏菌属 Amanita 10 4.78
小菇科 Mycenaceae 2 12 5.74 丝盖伞属 Inocybe 5 2.39
多孔菌科 Polyporaceae 8 14 6.70 蜡蘑属 Laccaria 5 2.39
红菇科 Russulaceae 3 23 11.00 小皮伞属 Marasmius 6 2.87
小菇属 Mycena 11 5.26
光柄菇属 Pluteus 5 2.39
红菇属 Russula 17 8.13
栓菌属 Trametes 5 2.39
关闭全屏
  • BibTeX
  • EndNote
  • RefWorks
  • TxT