收藏切换
Influence of Mountain Height on the Wind Pressure Distribution on the Roof of Airport Terminal Buildings
收藏切换
PDF
Xiao-min ZHANG1, Cheng PEI1, 2, *, Xiao-kang CHENG1, Xiong-wei YANG3, Cun-ming MA4
Science Technology and Engineering | 2025, 25(3) : 1165 - 1173
Less
收藏切换
Science Technology and Engineering | 2025, 25(3): 1165-1173
Papers·Architectural Science
Influence of Mountain Height on the Wind Pressure Distribution on the Roof of Airport Terminal Buildings
Full
Xiao-min ZHANG1, Cheng PEI1, 2, *, Xiao-kang CHENG1, Xiong-wei YANG3, Cun-ming MA4
Affiliations
  • 1. Airport College, Civil Aviation Flight University of China, Guanghan 618307, China
  • 2. Sichuan Provincial Engineering Research Center of Smart Operation and Maintenance of Civil Aviation Airports, Guanghan 618300, China
  • 3. School of Urban Geology and Engineering, Hebei GEO University, Shijiazhuang 050031, China
  • 4. Research Center for Wind Engineering, Southwest Jiaotong University, Chengdu 610031, China
Published: 2025-01-28 doi: 10.12404/j.issn.1671-1815.2402655
Outline
收藏切换

To study the wind pressure distribution characteristics of long-span roofs of airport terminals at different mountain heights in mountainous areas, a rigid model wind tunnel pressure measurement test of airport terminals roofs at mountain heights of 0 m, 30 m, 60 m, and 90 m was conducted to compare and analyze the effects of the heights on the surface mean and pulsating wind pressure, non-Gaussian characteristics of pulsating wind pressure, peak factor, and extreme wind pressure of the roof surface. The results show that the increase in mountain height significantly increases the mean and fluctuating wind pressure coefficient at the windward leading edge of the roof, and also intensifies the degree of flow separation at the leading edge of the roof. This causes the skewness, kurtosis, and probability density function of the fluctuating wind pressure at the windward leading edge of the roof to deviate significantly from the standard Gaussian distribution, exhibiting strong non-Gaussian characteristics. At the same time, the Hermite moment model was used to calculate the peak factor, and it was found that the peak factor of most measuring points on the roof surface was mainly distributed in the range of 3.5~4, which was much higher than the recommended value of 2.5 in GB 50009—2012. The extreme wind pressure value at the front edge of the roof also increased with the increase of the mountain height, and there was a similar variation pattern at the edge of the roof under all wind directions. Among them, the most unfavorable extreme negative pressure on the roof surface at a mountain height of 90m decreased by 44.9% compared to the 0m mountain height. Research can provide useful suggestions and references for the design and construction of terminals in similar airports.

mountain heights  /  airport terminal  /  long-span roof  /  extreme wind pressure  /  non-Gaussian features  /  wind tunnel test
Xiao-min ZHANG, Cheng PEI, Xiao-kang CHENG, Xiong-wei YANG, Cun-ming MA. Influence of Mountain Height on the Wind Pressure Distribution on the Roof of Airport Terminal Buildings[J]. Science Technology and Engineering, 2025 , 25 (3) : 1165 -1173 . DOI: 10.12404/j.issn.1671-1815.2402655
Year 2025 volume 25 Issue 3
PDF
356
141
Cite this Article
BibTeX
Article Info
doi: 10.12404/j.issn.1671-1815.2402655
  • Receive Date:2024-04-12
  • Online Date:2025-07-29
  • Published:2025-01-28
Article Data
Affiliations
History
  • Received:2024-04-12
  • Revised:2024-07-18
Funding
Affiliations
    1. Airport College, Civil Aviation Flight University of China, Guanghan 618307, China
    2. Sichuan Provincial Engineering Research Center of Smart Operation and Maintenance of Civil Aviation Airports, Guanghan 618300, China
    3. School of Urban Geology and Engineering, Hebei GEO University, Shijiazhuang 050031, China
    4. Research Center for Wind Engineering, Southwest Jiaotong University, Chengdu 610031, China
References
Share
https://castjournals.cast.org.cn/joweb/kxjsygc/EN/10.12404/j.issn.1671-1815.2402655
Share to
QR

Scan QR to access full text

Cite this article
BibTeX
Citations
表12种不同金属材料的力学参数

Family
属数
Number of
genus
种数
Number of
species
占总种数比例
Percentage of
total species (%)

Genus
种数
Number of
species
占总种数比例
Percentage of total
species (%)
鹅膏菌科Amanitaceae 2 11 5.26 鹅膏菌属 Amanita 10 4.78
小菇科 Mycenaceae 2 12 5.74 丝盖伞属 Inocybe 5 2.39
多孔菌科 Polyporaceae 8 14 6.70 蜡蘑属 Laccaria 5 2.39
红菇科 Russulaceae 3 23 11.00 小皮伞属 Marasmius 6 2.87
小菇属 Mycena 11 5.26
光柄菇属 Pluteus 5 2.39
红菇属 Russula 17 8.13
栓菌属 Trametes 5 2.39
关闭全屏
  • BibTeX
  • EndNote
  • RefWorks
  • TxT