收藏切换
Determination Method of Slope Safety Factor in Strength Reduction Method Based on Maximum Displacement Standard Deviation
收藏切换
PDF
Wen-rui SUN, Wei ZHANG*, Ke-jian WANG
Science Technology and Engineering | 2025, 25(15) : 6446 - 6452
Less
收藏切换
Science Technology and Engineering | 2025, 25(15): 6446-6452
Architectural Science
Determination Method of Slope Safety Factor in Strength Reduction Method Based on Maximum Displacement Standard Deviation
Full
Wen-rui SUN, Wei ZHANG*, Ke-jian WANG
Affiliations
  • College of Water Conservancy and Civil Engineering, South China Agricultural University, Guangzhou 510642, China
Published: 2025-05-28 doi: 10.12404/j.issn.1671-1815.2406267
Outline
收藏切换

The strength reduction method is an essential approach for calculating the slope safety factor, with its computation reliant on the criterion for slope instability during the process of strength reduction. Among the commonly employed criteria for slope instability, displacement mutation stands out; however, its determination remains relatively subjective at present. The maximum slope displacement was considered as a function of the strength reduction factor based on the strength reduction method. The standard deviations of the maximum slope displacements for different strength reduction factors were calculated. Consequently, a method for determining the slope safety factor within the strength reduction method, based on the standard deviations of the maximum slope displacements, was proposed. The method was validated through a typical case study and subsequently applied to a practical engineering project. The results demonstrate that the proposed method can objectively identify the occurrence of slope displacement mutation during the strength reduction process and effectively ascertain the slope safety factor. The proposed method is especially applicable for practical slope engineering projects requiring quantitative comparison of safety factors for different cases.

slope  /  strength reduction method  /  standard deviation  /  safety factor  /  numerical simulation
Wen-rui SUN, Wei ZHANG, Ke-jian WANG. Determination Method of Slope Safety Factor in Strength Reduction Method Based on Maximum Displacement Standard Deviation[J]. Science Technology and Engineering, 2025 , 25 (15) : 6446 -6452 . DOI: 10.12404/j.issn.1671-1815.2406267
Year 2025 volume 25 Issue 15
PDF
446
194
Cite this Article
BibTeX
Article Info
doi: 10.12404/j.issn.1671-1815.2406267
  • Receive Date:2024-08-21
  • Online Date:2025-07-09
  • Published:2025-05-28
Article Data
Affiliations
History
  • Received:2024-08-21
  • Revised:2024-11-30
Funding
Affiliations
    College of Water Conservancy and Civil Engineering, South China Agricultural University, Guangzhou 510642, China
References
Share
https://castjournals.cast.org.cn/joweb/kxjsygc/EN/10.12404/j.issn.1671-1815.2406267
Share to
QR

Scan QR to access full text

Cite this article
BibTeX
Citations
表12种不同金属材料的力学参数

Family
属数
Number of
genus
种数
Number of
species
占总种数比例
Percentage of
total species (%)

Genus
种数
Number of
species
占总种数比例
Percentage of total
species (%)
鹅膏菌科Amanitaceae 2 11 5.26 鹅膏菌属 Amanita 10 4.78
小菇科 Mycenaceae 2 12 5.74 丝盖伞属 Inocybe 5 2.39
多孔菌科 Polyporaceae 8 14 6.70 蜡蘑属 Laccaria 5 2.39
红菇科 Russulaceae 3 23 11.00 小皮伞属 Marasmius 6 2.87
小菇属 Mycena 11 5.26
光柄菇属 Pluteus 5 2.39
红菇属 Russula 17 8.13
栓菌属 Trametes 5 2.39
关闭全屏
  • BibTeX
  • EndNote
  • RefWorks
  • TxT