收藏切换
Dynamic Plastic Deformation Mechanism of 301 Stainless Steel at Low Temperatures
收藏切换
Tingting HUANG1, Pengfei WANG1, Meiduo CHEN1, Junlan ZHAN1, Jie TIAN2, Songlin XU1
Chinese Journal of High Pressure Physics | 2026, 40(8) : 080110-1 - 080110-12
Less
收藏切换
Chinese Journal of High Pressure Physics | 2026, 40(8): 080110-1-080110-12
• Dynamic Damage and Failure of Metals and Alloys •
Dynamic Plastic Deformation Mechanism of 301 Stainless Steel at Low Temperatures
Full
Tingting HUANG1, Pengfei WANG1, Meiduo CHEN1, Junlan ZHAN1, Jie TIAN2, Songlin XU1
Affiliations
  • 1Key Laboratory of Materials Mechanical Behavior and Design, Chinese Academy of Sciences, University of Science and Technology of China, Hefei 230027, Anhui, China
  • 2Engineering and Materials Science Experimental Center, University of Science and Technology of China, Hefei 230027, Anhui, China
Published: 2026-08-05 doi: 10.11858/gywlxb.20251246
Outline
收藏切换

Deep space exploration faces challenges from extreme temperatures and complex high-speed operating environments, placing higher demands on the low-temperature impact resistance of materials. In this study, a low-temperature Hopkinson bar impact experimental device was developed to achieve dynamic loading of materials under ultra-low temperature conditions within a vacuum liquid helium environment. The dynamic mechanical response of 301 stainless steel produced by two rolling processes was investigated under the combined effects of low temperature (30–298 K) and high strain rates (4000–5000 s−1). Experimental results show that the yield strength of both materials exhibits a significant negative correlation with temperature and a positive correlation with strain rate. The unidirectionally rolled samples displayed an anomalous increase in toughness at 77 K. The study indicates that the unidirectional rolling process induces a higher content of martensitic phase, thereby endowing the material with greater strength. Microstructural characterization results reveal that the anomalies in macroscopic mechanical behavior stem from the competition of deformation mechanisms. At room temperature, the samples mainly exhibit a toughness fracture mechanism, dominated by ductile dimples, whereas at low temperatures, they transition to a brittle fracture mode, dominated by quasi-cleavage. Based on this, the Johnson-Cook constitutive model was used to fit the mechanical properties, demonstrating good consistency with the experimental results. This research provides important experimental methods and theoretical support for the dynamic strength and toughness design of metallic materials under extreme low-temperature impact conditions.

impact loading  /  low temperature  /  strain rate  /  adiabatic shear  /  fracture mode
黄婷婷, 王鹏飞, 陈美多, 詹骏岚, 田杰, 徐松林. 低温下301不锈钢的动态塑性变形机制研究. 高压物理学报, 2026 , 40 (8) : 080110-1 -080110-12 . DOI: 10.11858/gywlxb.20251246
Tingting HUANG, Pengfei WANG, Meiduo CHEN, Junlan ZHAN, Jie TIAN, Songlin XU. Dynamic Plastic Deformation Mechanism of 301 Stainless Steel at Low Temperatures[J]. Chinese Journal of High Pressure Physics, 2026 , 40 (8) : 080110-1 -080110-12 . DOI: 10.11858/gywlxb.20251246
Year 2026 volume 40 Issue 8
2
1
Cite this Article
BibTeX
Article Info
doi: 10.11858/gywlxb.20251246
  • Receive Date:2025-10-31
  • Online Date:2026-11-05
  • Published:2026-08-05
Article Data
Affiliations
History
  • Received:2025-10-31
  • Revised:2025-12-08
  • Accepted:2026-04-02
Affiliations
    1Key Laboratory of Materials Mechanical Behavior and Design, Chinese Academy of Sciences, University of Science and Technology of China, Hefei 230027, Anhui, China
    2Engineering and Materials Science Experimental Center, University of Science and Technology of China, Hefei 230027, Anhui, China
References
Share
https://castjournals.cast.org.cn/joweb/gywlxb/EN/10.11858/gywlxb.20251246
Share to
QR

Scan QR to access full text

Cite this article
BibTeX
Citations
表12种不同金属材料的力学参数
科
Family
属数
Number of
genus
种数
Number of
species
占总种数比例
Percentage of
total species (%)
属
Genus
种数
Number of
species
占总种数比例
Percentage of total
species (%)
鹅膏菌科Amanitaceae 2 11 5.26 鹅膏菌属 Amanita 10 4.78
小菇科 Mycenaceae 2 12 5.74 丝盖伞属 Inocybe 5 2.39
多孔菌科 Polyporaceae 8 14 6.70 蜡蘑属 Laccaria 5 2.39
红菇科 Russulaceae 3 23 11.00 小皮伞属 Marasmius 6 2.87
小菇属 Mycena 11 5.26
光柄菇属 Pluteus 5 2.39
红菇属 Russula 17 8.13
栓菌属 Trametes 5 2.39
关闭全屏
  • BibTeX
  • EndNote
  • RefWorks
  • TxT