收藏切换
Fabrication of Nanocrystalline BaTiO3 Ceramics by Ultra-High Pressure Sintering
收藏切换
Chang-Jiang XIAO1, 2, Chang-Qing JIN2, Zheng-Xin LI1, Xiang-Rong DENG1
Chinese Journal of High Pressure Physics | 2011, 25(1) : 55 - 60
Less
收藏切换
Chinese Journal of High Pressure Physics | 2011, 25(1): 55-60
Fabrication of Nanocrystalline BaTiO3 Ceramics by Ultra-High Pressure Sintering
Full
Chang-Jiang XIAO1, 2, Chang-Qing JIN2, Zheng-Xin LI1, Xiang-Rong DENG1
Affiliations
  • 1.Department of Materials Science and Engineering, Henan University of Technology, Zhengzhou 450007, China
  • 2.Institute of Physics, Chinese Academy of Science, Beijing 100080, China
Published: 2011-02-15
Outline
收藏切换

10 nm raw BaTiO3 powder was sintered by ultra-high pressure assisted method at 6 GPa. The grain size of sintering samples is about 30 nm. The microstructures of sintering samples were studied by scanning electron microscope and atomic force microscopy. The results indicated that owing to the ultra-high pressure, the agglomerates in nano powders were broken down, and the densification was significantly increased. Additionally, the nucleation rate was increased due to reducing the energy barrier for nucleation and the growth rate was reduced due to the decrease of diffusivity. Thus, ultra-high pressure enables the specimen to be fabricated under relatively lower temperature and shorter period that assures to obtain dense nanocrystalline ceramics. The piezoelectricity was investigated by piezoelectric force microscopy. There existed some full piezoresponse hysteresis loops at different areas in 30 nm BaTiO3 ceramics, indicating the presence of piezoelectricity. In addition, oxygen vacancies were produced in strongly reducing atmosphere during ultra-high pressure sintering. F+ centers were formed because oxygen vacancies caught electrons, and therefore, the color of BaTiO3 ceramics became block.

BaTiO3  /  ultra-high pressure sintering  /  nanocrystalline ceramics  /  piezoeletricity  /  color center
肖长江, 靳常青, 栗正新, 邓相荣. 纳米BaTiO3陶瓷的超高压烧结. 高压物理学报, 2011 , 25 (1) : 55 -60 .
Chang-Jiang XIAO, Chang-Qing JIN, Zheng-Xin LI, Xiang-Rong DENG. Fabrication of Nanocrystalline BaTiO3 Ceramics by Ultra-High Pressure Sintering[J]. Chinese Journal of High Pressure Physics, 2011 , 25 (1) : 55 -60 .
Year 2011 volume 25 Issue 1
15
3
Cite this Article
BibTeX
Article Info
  • Receive Date:2010-05-24
  • Online Date:2026-11-02
  • Published:2011-02-15
Article Data
Affiliations
History
  • Received:2010-05-24
  • Revised:2010-09-05
Funding
Affiliations
    1.Department of Materials Science and Engineering, Henan University of Technology, Zhengzhou 450007, China
    2.Institute of Physics, Chinese Academy of Science, Beijing 100080, China
References
Share
https://castjournals.cast.org.cn/joweb/gywlxb/EN/
Share to
QR

Scan QR to access full text

Cite this article
BibTeX
Citations
表12种不同金属材料的力学参数
科
Family
属数
Number of
genus
种数
Number of
species
占总种数比例
Percentage of
total species (%)
属
Genus
种数
Number of
species
占总种数比例
Percentage of total
species (%)
鹅膏菌科Amanitaceae 2 11 5.26 鹅膏菌属 Amanita 10 4.78
小菇科 Mycenaceae 2 12 5.74 丝盖伞属 Inocybe 5 2.39
多孔菌科 Polyporaceae 8 14 6.70 蜡蘑属 Laccaria 5 2.39
红菇科 Russulaceae 3 23 11.00 小皮伞属 Marasmius 6 2.87
小菇属 Mycena 11 5.26
光柄菇属 Pluteus 5 2.39
红菇属 Russula 17 8.13
栓菌属 Trametes 5 2.39
关闭全屏
  • BibTeX
  • EndNote
  • RefWorks
  • TxT