收藏切换
Investigation into Charge Height Ratio of Micro-Detonatoron the Output Detonation Pressure
收藏切换
Ai-Jun HE, Nan YAN, Shu-Ling FU, Wan-Jun GENG
Chinese Journal of High Pressure Physics | 2010, 24(6) : 423 - 430
Less
收藏切换
Chinese Journal of High Pressure Physics | 2010, 24(6): 423-430
Investigation into Charge Height Ratio of Micro-Detonatoron the Output Detonation Pressure
Full
Ai-Jun HE, Nan YAN, Shu-Ling FU, Wan-Jun GENG
Affiliations
  • State Key Laboratory of Explosion Science and Technology, School of Mechatronical Engineering, Beijing Institute of Technology, Beijing 100081, China
Published: 2010-12-15
Outline
收藏切换

In order to accommodate to the needs of micro-explosive train in MEMS fuze, this paper carried out a specific study about the influence of charge height on the output detonation pressure in micro-detonator. The charge diameter is 0.9 mm, total height is 3 mm. The charge ratio of primary explosive and high explosive was to be changed. The output detonation pressure was measured by manganin piezoresistance method. In the micro-detonator, the critical height of primary explosive PbN6 is 0.36 mm. When the primary explosive PbN6 height is 1.65 mm, the micro-detonator has the maximal output detonation pressure 10.3 GPa. When the primary explosive PbN6 height is less than or more than 1.65 mm, the high explosive HMX height is less than or more than 1.35 mm, and the output detonation pressure of the micro-detonator is reduced. The range of the primary explosive PbN6 and the high explosive HMX is 0.69~2.26.

micro-detonator  /  detonation pressure  /  critical height  /  best height ratio  /  MEMS explosive train
何爱军, 严楠, 付淑玲, 耿万钧. 微型雷管药高比对输出威力的影响. 高压物理学报, 2010 , 24 (6) : 423 -430 .
Ai-Jun HE, Nan YAN, Shu-Ling FU, Wan-Jun GENG. Investigation into Charge Height Ratio of Micro-Detonatoron the Output Detonation Pressure[J]. Chinese Journal of High Pressure Physics, 2010 , 24 (6) : 423 -430 .
Year 2010 volume 24 Issue 6
25
3
Cite this Article
BibTeX
Article Info
  • Receive Date:2009-12-07
  • Online Date:2026-11-02
  • Published:2010-12-15
Article Data
Affiliations
History
  • Received:2009-12-07
  • Revised:2010-03-26
Funding
Affiliations
    State Key Laboratory of Explosion Science and Technology, School of Mechatronical Engineering, Beijing Institute of Technology, Beijing 100081, China
References
Share
https://castjournals.cast.org.cn/joweb/gywlxb/EN/
Share to
QR

Scan QR to access full text

Cite this article
BibTeX
Citations
表12种不同金属材料的力学参数
科
Family
属数
Number of
genus
种数
Number of
species
占总种数比例
Percentage of
total species (%)
属
Genus
种数
Number of
species
占总种数比例
Percentage of total
species (%)
鹅膏菌科Amanitaceae 2 11 5.26 鹅膏菌属 Amanita 10 4.78
小菇科 Mycenaceae 2 12 5.74 丝盖伞属 Inocybe 5 2.39
多孔菌科 Polyporaceae 8 14 6.70 蜡蘑属 Laccaria 5 2.39
红菇科 Russulaceae 3 23 11.00 小皮伞属 Marasmius 6 2.87
小菇属 Mycena 11 5.26
光柄菇属 Pluteus 5 2.39
红菇属 Russula 17 8.13
栓菌属 Trametes 5 2.39
关闭全屏
  • BibTeX
  • EndNote
  • RefWorks
  • TxT