收藏切换
Study on Big Entry Hole Bidirectional Shaped Charge
收藏切换
Lei LI, Zhao-Wu SHEN, Hong-Hao MA
Chinese Journal of High Pressure Physics | 2011, 25(6) : 539 - 548
Less
收藏切换
Chinese Journal of High Pressure Physics | 2011, 25(6): 539-548
Study on Big Entry Hole Bidirectional Shaped Charge
Full
Lei LI, Zhao-Wu SHEN, Hong-Hao MA
Affiliations
  • Department of Modern Mechanics, University of Science and Technology of China, Hefei 230026, China
Published: 2011-12-15
Outline
收藏切换

A shaped charge model, in which the biconical liner with the two-way charging structure was combined, was designed. Its jet formation mechanism was studied by means of numerical simulations, and the jet parameters were calculated. The obtained results were shown as follows: First, the small cone angle of the liner formed shaped charge jet, and the large cone angle formed explosively over-turned projectile. Second, the velocity of the jet tip and the projectile were respectively 6 250 m/s and 1 620.9 m/s. Third, the length and average diameter of the projectile were 26.1 mm and 8.6 mm. Based on the numerical results the jet penetrate formula was amended and then used to calculate the penetration depth of the shaped charge, and the calculated value was 69.6 mm. Finally, an experiment was carried out according to the model, the length and average diameter of the projectile were 28.1 mm and 8.8 mm. Furthermore, the penetration depth and hole size were 70 mm and 17 mm. Good agreement is among the numerical, theoretical calculation and the experimental results. In addition, the superior penetration performance is proved by the experimental results.

biconical liner  /  two-way charging  /  numerical simulation  /  shaped charge jet  /  explosively formed projectile  /  penetration performance
李磊, 沈兆武, 马宏昊. 大孔径双向聚能射孔弹的研究. 高压物理学报, 2011 , 25 (6) : 539 -548 .
Lei LI, Zhao-Wu SHEN, Hong-Hao MA. Study on Big Entry Hole Bidirectional Shaped Charge[J]. Chinese Journal of High Pressure Physics, 2011 , 25 (6) : 539 -548 .
Year 2011 volume 25 Issue 6
12
1
Cite this Article
BibTeX
Article Info
  • Receive Date:2010-09-29
  • Online Date:2026-11-02
  • Published:2011-12-15
Article Data
Affiliations
History
  • Received:2010-09-29
  • Revised:2011-01-20
Funding
Affiliations
    Department of Modern Mechanics, University of Science and Technology of China, Hefei 230026, China
References
Share
https://castjournals.cast.org.cn/joweb/gywlxb/EN/
Share to
QR

Scan QR to access full text

Cite this article
BibTeX
Citations
表12种不同金属材料的力学参数
科
Family
属数
Number of
genus
种数
Number of
species
占总种数比例
Percentage of
total species (%)
属
Genus
种数
Number of
species
占总种数比例
Percentage of total
species (%)
鹅膏菌科Amanitaceae 2 11 5.26 鹅膏菌属 Amanita 10 4.78
小菇科 Mycenaceae 2 12 5.74 丝盖伞属 Inocybe 5 2.39
多孔菌科 Polyporaceae 8 14 6.70 蜡蘑属 Laccaria 5 2.39
红菇科 Russulaceae 3 23 11.00 小皮伞属 Marasmius 6 2.87
小菇属 Mycena 11 5.26
光柄菇属 Pluteus 5 2.39
红菇属 Russula 17 8.13
栓菌属 Trametes 5 2.39
关闭全屏
  • BibTeX
  • EndNote
  • RefWorks
  • TxT