收藏切换
Stress Analysis on Hinge Sleeve and Cylinder of China-Type Cubic-Anvil High Pressure Apparatus under High Pressure
收藏切换
Cong ZHANG, Hong-An MA, Qi-Gang HAN, Zhan-Chang LI, Xiao-Peng JIA
Chinese Journal of High Pressure Physics | 2010, 24(5) : 321 - 325
Less
收藏切换
Chinese Journal of High Pressure Physics | 2010, 24(5): 321-325
Stress Analysis on Hinge Sleeve and Cylinder of China-Type Cubic-Anvil High Pressure Apparatus under High Pressure
Full
Cong ZHANG, Hong-An MA, Qi-Gang HAN, Zhan-Chang LI, Xiao-Peng JIA
Affiliations
  • State Key Laboratory of Superhard Materials, Jilin University, Changchun 130012, China
Published: 2010-10-15
Outline
收藏切换

The contact analysis of hinge sleeve, cylinder and dowel in China-type cubic-anvil high pressure apparatus were conducted by finite element method and ANSYS. To avoid excessive similarity and supposition for ear and obtain exact simulation results, the fixing dowel, whose movement is constrained, was introduced in the model. The results indicated that the peak values of von Mises stress in hinge sleeve and cylinder are located within the inner ear and the bottom of cylinder, respectively, and the corresponding calculated maximum von Mises stresses are 348.32 MPa and 242.87 MPa, respectively, which are lower than allowable stress of 486.67 MPa. These results have been verified by numerous experiments.

stress  /  cubic hinge press  /  high pressure
张聪, 马红安, 韩奇钢, 李战厂, 贾晓鹏. 高压下国产六面顶压机铰链梁和工作缸的应力分析. 高压物理学报, 2010 , 24 (5) : 321 -325 .
Cong ZHANG, Hong-An MA, Qi-Gang HAN, Zhan-Chang LI, Xiao-Peng JIA. Stress Analysis on Hinge Sleeve and Cylinder of China-Type Cubic-Anvil High Pressure Apparatus under High Pressure[J]. Chinese Journal of High Pressure Physics, 2010 , 24 (5) : 321 -325 .
Year 2010 volume 24 Issue 5
15
2
Cite this Article
BibTeX
Article Info
  • Receive Date:2009-07-20
  • Online Date:2026-11-02
  • Published:2010-10-15
Article Data
Affiliations
History
  • Received:2009-07-20
  • Revised:2009-09-24
Funding
Affiliations
    State Key Laboratory of Superhard Materials, Jilin University, Changchun 130012, China
References
Share
https://castjournals.cast.org.cn/joweb/gywlxb/EN/
Share to
QR

Scan QR to access full text

Cite this article
BibTeX
Citations
表12种不同金属材料的力学参数
科
Family
属数
Number of
genus
种数
Number of
species
占总种数比例
Percentage of
total species (%)
属
Genus
种数
Number of
species
占总种数比例
Percentage of total
species (%)
鹅膏菌科Amanitaceae 2 11 5.26 鹅膏菌属 Amanita 10 4.78
小菇科 Mycenaceae 2 12 5.74 丝盖伞属 Inocybe 5 2.39
多孔菌科 Polyporaceae 8 14 6.70 蜡蘑属 Laccaria 5 2.39
红菇科 Russulaceae 3 23 11.00 小皮伞属 Marasmius 6 2.87
小菇属 Mycena 11 5.26
光柄菇属 Pluteus 5 2.39
红菇属 Russula 17 8.13
栓菌属 Trametes 5 2.39
关闭全屏
  • BibTeX
  • EndNote
  • RefWorks
  • TxT