收藏切换
A Kind of Anodized Aluminium Shock Wave Detectors
收藏切换
Yue SUN1, 2, Chang-Ying YUAN2, Xiu-Lu ZHANG1, Guo-Dong WU1, 2
Chinese Journal of High Pressure Physics | 2004, 18(2) : 157 - 162
Less
收藏切换
Chinese Journal of High Pressure Physics | 2004, 18(2): 157-162
A Kind of Anodized Aluminium Shock Wave Detectors
Full
Yue SUN1, 2, Chang-Ying YUAN2, Xiu-Lu ZHANG1, Guo-Dong WU1, 2
Affiliations
  • 1.Institute of High Temperature and High Pressure Physics, Sichuan University, Chengdu 610065, China
  • 2.Laboratory for Shock Wave and Detonation Physics Research, Institute of Fluid Physics, CAEP, Mianyang 621900, China
Published: 2004-06-05
Outline
收藏切换

For making a layer of insulated film, which are both thin, intact, even, compact, and with a higher electric insulating intensity, on a shaped pure aluminium wire (35 mm in length and 1 mm in diameter), we first measured a polarized curve of one half hemispherical end of the aluminium wire based on the anodization principle, and obtained an important technical condition that the aluminium insulated film can be grown steadily in the region of 3~13 V at the environment temperature of 50~60 ℃. And then, we confirmed a series of applied operating steps and relevant technical parameters. Therefore, a good experimental recipe, which can be used to direct mass-producing shockwave velocity detectors with a good performance in coherence and reliability, has been determined naturally. At the same time, the influences of temperature condition in electrolysis system and sealing method with boiling water on the film's physical quality and electric insulating intensity were revealed. With the technique, a Al2O3 film of 4~15 μm has been made uniformly, which possesses insulating ability of D. C 250 V for 1 min duration. Furthermore, the physical appearance and electric insulating intensity of these detectors are undistinguishable, relative to the original when put them into the liquefied nitrogen for 4 h. The switched on and off consistencies of these probes are measured to be not over ±20 ns tested by an impacter forging hammer of 300 N·m. Actually, the performance will be further improved under a higher shock pressure.

anodized aluminium film  /  shock wave velocity detector  /  electronic probe  /  shock compression  /  insulated film
孙悦, 袁长迎, 张修路, 吴国栋. 铝阳极化冲击波探针的工艺探索. 高压物理学报, 2004 , 18 (2) : 157 -162 .
Yue SUN, Chang-Ying YUAN, Xiu-Lu ZHANG, Guo-Dong WU. A Kind of Anodized Aluminium Shock Wave Detectors[J]. Chinese Journal of High Pressure Physics, 2004 , 18 (2) : 157 -162 .
Year 2004 volume 18 Issue 2
25
2
Cite this Article
BibTeX
Article Info
  • Receive Date:2003-08-04
  • Online Date:2026-10-31
  • Published:2004-06-05
Article Data
Affiliations
History
  • Received:2003-08-04
  • Revised:2004-01-05
Affiliations
    1.Institute of High Temperature and High Pressure Physics, Sichuan University, Chengdu 610065, China
    2.Laboratory for Shock Wave and Detonation Physics Research, Institute of Fluid Physics, CAEP, Mianyang 621900, China
References
Share
https://castjournals.cast.org.cn/joweb/gywlxb/EN/
Share to
QR

Scan QR to access full text

Cite this article
BibTeX
Citations
表12种不同金属材料的力学参数
科
Family
属数
Number of
genus
种数
Number of
species
占总种数比例
Percentage of
total species (%)
属
Genus
种数
Number of
species
占总种数比例
Percentage of total
species (%)
鹅膏菌科Amanitaceae 2 11 5.26 鹅膏菌属 Amanita 10 4.78
小菇科 Mycenaceae 2 12 5.74 丝盖伞属 Inocybe 5 2.39
多孔菌科 Polyporaceae 8 14 6.70 蜡蘑属 Laccaria 5 2.39
红菇科 Russulaceae 3 23 11.00 小皮伞属 Marasmius 6 2.87
小菇属 Mycena 11 5.26
光柄菇属 Pluteus 5 2.39
红菇属 Russula 17 8.13
栓菌属 Trametes 5 2.39
关闭全屏
  • BibTeX
  • EndNote
  • RefWorks
  • TxT