收藏切换
Research on the Pressure Loss in the Generating Process of Hyperpressure Waterjet
收藏切换
Hai-Jun LI, Yuan-Hang HE, Zhuo-Ping DUAN, Qing-Ming ZHANG
Chinese Journal of High Pressure Physics | 2004, 18(2) : 139 - 143
Less
收藏切换
Chinese Journal of High Pressure Physics | 2004, 18(2): 139-143
Research on the Pressure Loss in the Generating Process of Hyperpressure Waterjet
Full
Hai-Jun LI, Yuan-Hang HE, Zhuo-Ping DUAN, Qing-Ming ZHANG
Affiliations
  • State Key Laboratory of Science of Explosion and Safety, Beijing Institute of Technology, Beijing 100081, China
Published: 2004-06-05
Outline
收藏切换

The pressure loss in the generating process of hyperpressure waterjet is theoretically studied in this paper. The velocities of waterjets have been measured under different conditions. On the basis of theoretical results and the experimental data, the initial parameters of the hyperpressure waterjet have been obtained. The results show that the pressure loss in the generating process is mainly resulted from the section shrinkage. The lost pressure is about 49 percent of the final kinetic energy of hyperpressure waterjet. As the nozzle diameter increases, the pressure loss decreases and the output power of the waterjet generating system is enhanced. As waterjet pressure increases, the pressure loss increases, but the increased degree decreases.

hyperpressure waterjet  /  pressure loss  /  section shrinkage  /  nozzle diameter  /  waterjet pressure
李海军, 何远航, 段卓平, 张庆明. 超高压水射流形成过程中的压力损失研究. 高压物理学报, 2004 , 18 (2) : 139 -143 .
Hai-Jun LI, Yuan-Hang HE, Zhuo-Ping DUAN, Qing-Ming ZHANG. Research on the Pressure Loss in the Generating Process of Hyperpressure Waterjet[J]. Chinese Journal of High Pressure Physics, 2004 , 18 (2) : 139 -143 .
Year 2004 volume 18 Issue 2
21
2
Cite this Article
BibTeX
Article Info
  • Receive Date:2003-11-12
  • Online Date:2026-10-31
  • Published:2004-06-05
Article Data
Affiliations
History
  • Received:2003-11-12
  • Revised:2004-02-06
Funding
Affiliations
    State Key Laboratory of Science of Explosion and Safety, Beijing Institute of Technology, Beijing 100081, China
References
Share
https://castjournals.cast.org.cn/joweb/gywlxb/EN/
Share to
QR

Scan QR to access full text

Cite this article
BibTeX
Citations
表12种不同金属材料的力学参数
科
Family
属数
Number of
genus
种数
Number of
species
占总种数比例
Percentage of
total species (%)
属
Genus
种数
Number of
species
占总种数比例
Percentage of total
species (%)
鹅膏菌科Amanitaceae 2 11 5.26 鹅膏菌属 Amanita 10 4.78
小菇科 Mycenaceae 2 12 5.74 丝盖伞属 Inocybe 5 2.39
多孔菌科 Polyporaceae 8 14 6.70 蜡蘑属 Laccaria 5 2.39
红菇科 Russulaceae 3 23 11.00 小皮伞属 Marasmius 6 2.87
小菇属 Mycena 11 5.26
光柄菇属 Pluteus 5 2.39
红菇属 Russula 17 8.13
栓菌属 Trametes 5 2.39
关闭全屏
  • BibTeX
  • EndNote
  • RefWorks
  • TxT