Full
Outline
The traditional domestic hinge-type cubic presses are typically operated using limit switch for positioning, fully-open rapid hydraulic oil filling, and fixed-rate pressurization/depressurization modes. Such configurations are limited by poor six-cylinders positioning accuracy and hydraulic filling synchronization, and the pressurization and depressurization rates fail to meet the stringent requirements of ultra-high two-stage pressurization for eccentric load control and mechanical stability. In this study, systematic modification and upgrade were implemented on a domestic cubic press with 650 mm cylinders. To suppress or eliminate the floating and deformation of the frame under overpressure conditions, self-locking pin shaft was designed and assembled, and pre-compensation for frame deformation under high pressure was performed. In addition, aim at improving alignment accuracy and hydraulic filling synchronization, a dual-pump multi-mode hydraulic circuit and an equal-volume cylinder oil-filling process were built. Furthermore, a three-stage feeding method combined with an independent displacement action mode was innovatively proposed. A closed-loop control program was developed to operate in parallel with the original press control system, enabling the real-time acquisition, synchronous monitoring, and closed-loop adjustment of data sets including press operational status, oil pressure, and heating temperature. Additionally, a strategy combining proportional-integral-derivative (PID) control with precision pressure-control module components was proposed to achieve ultra-slow pressurization and depressurization. The correlation between synthesis chamber pressure and oil pressure, and the correlation between heating temperature and power were experimentally calibrated. Furthermore, the high-temperature and high-pressure (HTHP) synthesis of centimeter-sized nano-polycrystalline diamond bulk specimen was conducted. The results indicate that the optimized and upgraded domestic 650 mm cubic press is capable of synthesis large-volume samples at 15 GPa and over 2000 ℃, which significantly expands the application area of domestic cubic presses.
13
6
| 科 Family | 属数 Number of genus | 种数 Number of species | 占总种数比例 Percentage of total species (%) | 属 Genus | 种数 Number of species | 占总种数比例 Percentage of total species (%) |
|---|---|---|---|---|---|---|
| 鹅膏菌科Amanitaceae | 2 | 11 | 5.26 | 鹅膏菌属 Amanita | 10 | 4.78 |
| 小菇科 Mycenaceae | 2 | 12 | 5.74 | 丝盖伞属 Inocybe | 5 | 2.39 |
| 多孔菌科 Polyporaceae | 8 | 14 | 6.70 | 蜡蘑属 Laccaria | 5 | 2.39 |
| 红菇科 Russulaceae | 3 | 23 | 11.00 | 小皮伞属 Marasmius | 6 | 2.87 |
| 小菇属 Mycena | 11 | 5.26 | ||||
| 光柄菇属 Pluteus | 5 | 2.39 | ||||
| 红菇属 Russula | 17 | 8.13 | ||||
| 栓菌属 Trametes | 5 | 2.39 |
关闭全屏
No. 86 Xueyuan South Road, Haidian District, Beijing
010-62662699(Operation and Technical Support)
qkjq@cast.org.cn
Copyright © 2025 China Association for Science and Technology. All rights reserved. For all open access content, the relevant licensing terms apply.
Sponsored by the Office of the Leading Group for Cybersecurity and Informatization of CAST, and supported by Science and Technology Review Publishing House
