收藏切换
Adiabatic Shear Failure Behavior of 30CrMnMo Steel under Pulse Stress Impact
收藏切换
Hao CHENG1, Meng WANG1, *, Xiang LI1, Yutong QU2, Hailong WU1, Zizhen LIU1, Bo LI1
Chinese Journal of High Pressure Physics | 2024, 38(4) : 044101-1 - 044101-9
Less
收藏切换
Chinese Journal of High Pressure Physics | 2024, 38(4): 044101-1-044101-9
• Dynamic Response of Matter •
Adiabatic Shear Failure Behavior of 30CrMnMo Steel under Pulse Stress Impact
Full
Hao CHENG1, Meng WANG1, *, Xiang LI1, Yutong QU2, Hailong WU1, Zizhen LIU1, Bo LI1
Affiliations
  • 1School of Equipment Engineering, Shenyang Ligong University, Shenyang 110159, Liaoning, China
  • 2China Ordnance Industry Testing and Research Institute, Huayin 714200, Shaanxi, China
Published: 2024-08-05 doi: 10.11858/gywlxb.20230812
Outline
收藏切换

In order to study the adiabatic shear failure behavior and evolution characteristics of 30CrMnMo steel under pulse stress impact, a split Hopkinson pressure bar was used to conduct an axisymmetric cap shaped specimen for impact shear experiments. The shear failure evolution and temperature distribution in the shear zone under different incident pulse stress loads were numerically simulated using LS-DYNA dynamic finite element software. The results indicate that the adiabatic shear failure of the cap shaped specimen is related to the specific impulse of the pulse stress. For cap shaped specimen of 30CrMnMo steel, the specific impulse of pulse stress corresponding to the adiabatic shear failure is approximately constant. In numerical simulation, when the grid size is smaller than the width of the shear band, the local temperature rise of hot spot within the shear band can be effectively simulated. The evolution of adiabatic shear instability is characterized by simultaneous propagation from the corner of the shear zone to the center, and the materials inside and outside the shear zone mainly undergo two stages: uniform shear deformation and rapid expansion of instability.

adiabatic shear  /  pulse stress  /  axisymmetric cap shaped specimen  /  temperature field distribution  /  30CrMnMo steel
程昊, 王猛, 李想, 曲禹同, 吴海龙, 刘子禛, 李博. 脉冲应力冲击下30CrMnMo钢的绝热剪切失效行为. 高压物理学报, 2024 , 38 (4) : 044101-1 -044101-9 . DOI: 10.11858/gywlxb.20230812
Hao CHENG, Meng WANG, Xiang LI, Yutong QU, Hailong WU, Zizhen LIU, Bo LI. Adiabatic Shear Failure Behavior of 30CrMnMo Steel under Pulse Stress Impact[J]. Chinese Journal of High Pressure Physics, 2024 , 38 (4) : 044101-1 -044101-9 . DOI: 10.11858/gywlxb.20230812
Year 2024 volume 38 Issue 4
3
1
Cite this Article
BibTeX
Article Info
doi: 10.11858/gywlxb.20230812
  • Receive Date:2023-12-13
  • Online Date:2026-11-06
  • Published:2024-08-05
Article Data
Affiliations
History
  • Received:2023-12-13
  • Revised:2024-02-28
Affiliations
    1School of Equipment Engineering, Shenyang Ligong University, Shenyang 110159, Liaoning, China
    2China Ordnance Industry Testing and Research Institute, Huayin 714200, Shaanxi, China
References
Share
https://castjournals.cast.org.cn/joweb/gywlxb/EN/10.11858/gywlxb.20230812
Share to
QR

Scan QR to access full text

Cite this article
BibTeX
Citations
表12种不同金属材料的力学参数
科
Family
属数
Number of
genus
种数
Number of
species
占总种数比例
Percentage of
total species (%)
属
Genus
种数
Number of
species
占总种数比例
Percentage of total
species (%)
鹅膏菌科Amanitaceae 2 11 5.26 鹅膏菌属 Amanita 10 4.78
小菇科 Mycenaceae 2 12 5.74 丝盖伞属 Inocybe 5 2.39
多孔菌科 Polyporaceae 8 14 6.70 蜡蘑属 Laccaria 5 2.39
红菇科 Russulaceae 3 23 11.00 小皮伞属 Marasmius 6 2.87
小菇属 Mycena 11 5.26
光柄菇属 Pluteus 5 2.39
红菇属 Russula 17 8.13
栓菌属 Trametes 5 2.39
关闭全屏
  • BibTeX
  • EndNote
  • RefWorks
  • TxT