收藏切换
Experimental Study on the Penetration of Zr-Based Amorphous Fragment into Carbon Fiber Composite Target and Post-Effect Aluminum Target
收藏切换
Jie JIA1, Xiaoqi ZHI1, *, Chunjie HAO2, Jin LI1, Lu GUO1, Xinghe LIU1
Chinese Journal of High Pressure Physics | 2024, 38(2) : 025101-1 - 025101-10
Less
收藏切换
Chinese Journal of High Pressure Physics | 2024, 38(2): 025101-1-025101-10
• High Pressure Applications •
Experimental Study on the Penetration of Zr-Based Amorphous Fragment into Carbon Fiber Composite Target and Post-Effect Aluminum Target
Full
Jie JIA1, Xiaoqi ZHI1, *, Chunjie HAO2, Jin LI1, Lu GUO1, Xinghe LIU1
Affiliations
  • 1College of Mechatronics Engineering, North University of China, Taiyuan 030051, Shanxi, China
  • 2Jinxi Industries Group, Taiyuan 030027, Shanxi, China
Published: 2024-04-05 doi: 10.11858/gywlxb.20230764
Outline
收藏切换

Zr-based amorphous fragment is an emerging active and efficient destructive element, which will undergo a deflagration reaction and fragmentation when its impact velocity reaches its threshold. The deflagration reaction and fragmentation could greatly increase its behind-armor destructive capability. In order to study the penetration damage mechanism and behind-armor destructive capability of Zr-based amorphous fragments on carbon fiber reinforced composites, a ballistic gun was used to load the spherical fragments to impact 8 and 6 mm thick carbon fiber composite targets at velocities ranging from 496.4 m/s to 1085.8 m/s and 571.4 m/s to 1103.9 m/s, respectively. Then a 2 mm thick LY12 aluminum target plate was arranged behind the target to measure the damage capability under different working conditions. The test results showed that the mainly failure mode of strike face was a coupling failure mode of compression failure and shear failure, and the main failure mode of its back face was a coupling failure mode of tensile failure and the de-sticky splitting of the layer. With the increase of the impact velocity, the proportion of the compression and shear coupling damage of the carbon fiber composite target plate was gradually increased, and the phenomenon of tensile breakage and delamination was gradually decreased. The ballistic ultimate velocities of the fragment for 8 and 6 mm thick carbon fiber composite target were 351.9 and 264.6 m/s, respectively. Behind-armor damage area of the fragment impacted on the 8 mm thick carbon fiber composite target was larger than that of the 6 mm thick carbon fiber target under the same impact velocity. The difference of behind-armor damage area impacted on 8 and 6 mm thick carbon fiber composite targets decreased with the increase of the impact velocity. The behind-armor damage ability of the fragment impacting on the carbon fiber composite target increased with the increase of the impact velocity.

Zr-based amorphous alloy  /  carbon fiber reinforced composites  /  behind-armor damage capacity  /  active fragment
贾杰, 智小琦, 郝春杰, 李劲, 郭璐, 柳星河. Zr基非晶破片对碳纤维复合靶及后效铝靶的侵彻试验研究. 高压物理学报, 2024 , 38 (2) : 025101-1 -025101-10 . DOI: 10.11858/gywlxb.20230764
Jie JIA, Xiaoqi ZHI, Chunjie HAO, Jin LI, Lu GUO, Xinghe LIU. Experimental Study on the Penetration of Zr-Based Amorphous Fragment into Carbon Fiber Composite Target and Post-Effect Aluminum Target[J]. Chinese Journal of High Pressure Physics, 2024 , 38 (2) : 025101-1 -025101-10 . DOI: 10.11858/gywlxb.20230764
Year 2024 volume 38 Issue 2
9
5
Cite this Article
BibTeX
Article Info
doi: 10.11858/gywlxb.20230764
  • Receive Date:2023-10-22
  • Online Date:2026-11-06
  • Published:2024-04-05
Article Data
Affiliations
History
  • Received:2023-10-22
  • Revised:2023-11-10
Affiliations
    1College of Mechatronics Engineering, North University of China, Taiyuan 030051, Shanxi, China
    2Jinxi Industries Group, Taiyuan 030027, Shanxi, China
References
Share
https://castjournals.cast.org.cn/joweb/gywlxb/EN/10.11858/gywlxb.20230764
Share to
QR

Scan QR to access full text

Cite this article
BibTeX
Citations
表12种不同金属材料的力学参数
科
Family
属数
Number of
genus
种数
Number of
species
占总种数比例
Percentage of
total species (%)
属
Genus
种数
Number of
species
占总种数比例
Percentage of total
species (%)
鹅膏菌科Amanitaceae 2 11 5.26 鹅膏菌属 Amanita 10 4.78
小菇科 Mycenaceae 2 12 5.74 丝盖伞属 Inocybe 5 2.39
多孔菌科 Polyporaceae 8 14 6.70 蜡蘑属 Laccaria 5 2.39
红菇科 Russulaceae 3 23 11.00 小皮伞属 Marasmius 6 2.87
小菇属 Mycena 11 5.26
光柄菇属 Pluteus 5 2.39
红菇属 Russula 17 8.13
栓菌属 Trametes 5 2.39
关闭全屏
  • BibTeX
  • EndNote
  • RefWorks
  • TxT