Home Journals Articles Updates About
CN
image
收藏切换
Research Progress on Manufacture of New Energy Devices by Inkjet Printing
收藏切换
Zhiyuan GONG, Zhongqi ZHU, Ziyong LI, Piao QU, Sefiu Abolaji RASAKI, Changyong LIU, Changshi LAO, Zhangwei CHEN
Journal of the Chinese Ceramic Society | 2021, 49(5) : 855 - 866
Less
收藏切换
Journal of the Chinese Ceramic Society | 2021, 49(5): 855-866
• Special Issue on 3D Printing Technology for Inorganic Non-metallic Material •
Research Progress on Manufacture of New Energy Devices by Inkjet Printing
Full
Zhiyuan GONG, Zhongqi ZHU, Ziyong LI, Piao QU, Sefiu Abolaji RASAKI, Changyong LIU, Changshi LAO, Zhangwei CHEN
Affiliations
  • Additive Manufacturing Institute, Shenzhen University, Shenzhen 518060, Guangdong, China

    • GONG Zhiyuan(1995-), male, Master candidate. E-mail:

About Author:

GONG Zhiyuan(1995-), male, Master candidate. E-mail:

Published: 2021-05-20 doi: 10.14062/j.issn.0454-5648.20200661
Outline
收藏切换

The manufacture of new energy technology and devices is one of the effective ways for sustainable development. Most of the existing materials used in new energy devices are based on ceramics and composite materials, etc.. The efficient and reliable manufacture is to obtain and use high-performance devices. This paper represented the performance requirements of ink-jet printing technology in the preparation of new energy devices, and reviewed research progress on ink-jet printing technology in the manufacture of new energy storage devices (i.e., supercapacitors and lithium ion batteries) and new energy conversion devices (i.e., solar and fuel cells). In addition, some problems and the corresponding solutions to the problems from raw materials to printing technology were also discussed, and the future development on inkjet printing of new energy devices was forecasted as well.

inkjet printing  /  new energy devices  /  super capacitors  /  lithium ion batteries  /  solar cells  /  fuel cells  /  three dimensional (3D) printing
龚志远, 朱中琪, 黎子永, 屈飘, Sefiu Abolaji Rasaki, 刘长勇, 劳长石, 陈张伟. 喷墨打印技术制造新能源器件研究进展. 硅酸盐学报, 2021 , 49 (5) : 855 -866 . DOI: 10.14062/j.issn.0454-5648.20200661
Zhiyuan GONG, Zhongqi ZHU, Ziyong LI, Piao QU, Sefiu Abolaji RASAKI, Changyong LIU, Changshi LAO, Zhangwei CHEN. Research Progress on Manufacture of New Energy Devices by Inkjet Printing[J]. Journal of the Chinese Ceramic Society, 2021 , 49 (5) : 855 -866 . DOI: 10.14062/j.issn.0454-5648.20200661
Appendix
Less
Year 2021 volume 49 Issue 5
27
9
Cite this Article
BibTeX
Article Info
doi: 10.14062/j.issn.0454-5648.20200661
  • Receive Date：2020-09-01
  • Online Date：2026-10-30
  • Published：2021-05-20
Article Data
Affiliations
History
  • Received：2020-09-01
  • Revised：2020-10-18
Funding
Affiliations
    Additive Manufacturing Institute, Shenzhen University, Shenzhen 518060, Guangdong, China

Corresponding:

CHEN Zhangwei(1985-), male, Ph.D., Professor. E-mail:
References
Share
https://castjournals.cast.org.cn/joweb/gsyxb/EN/10.14062/j.issn.0454-5648.20200661
Share to
QR

Scan QR to access full text

Cite this article
BibTeX
Citations
表12种不同金属材料的力学参数
科
Family		 属数
Number of
genus		 种数
Number of
species		 占总种数比例
Percentage of
total species (%)		 属
Genus		 种数
Number of
species		 占总种数比例
Percentage of total
species (%)
鹅膏菌科Amanitaceae 2 11 5.26 鹅膏菌属 Amanita 10 4.78
小菇科 Mycenaceae 2 12 5.74 丝盖伞属 Inocybe 5 2.39
多孔菌科 Polyporaceae 8 14 6.70 蜡蘑属 Laccaria 5 2.39
红菇科 Russulaceae 3 23 11.00 小皮伞属 Marasmius 6 2.87
小菇属 Mycena 11 5.26
光柄菇属 Pluteus 5 2.39
红菇属 Russula 17 8.13
栓菌属 Trametes 5 2.39
关闭全屏
  • BibTeX
  • EndNote
  • RefWorks
  • TxT
Links
Articles
Latest Articles
Most Read
Collections
Updates
Events
News
Multimedia
About
About Us
Contact
No. 86 Xueyuan South Road, Haidian District, Beijing
100081
010-62662699(Operation and Technical Support)
qkjq@cast.org.cn

Copyright © 2025 China Association for Science and Technology. All rights reserved. For all open access content, the relevant licensing terms apply.
Sponsored by the Office of the Leading Group for Cybersecurity and Informatization of CAST, and supported by Science and Technology Review Publishing House