Home Journals Articles Updates About
CN
image
收藏切换
Mechanical and Biological Properties of ZrO2 Bioceramics by Stereolithography Technique
收藏切换
Fen CHEN1, 2, Yaru WU1, 2, Hao ZHU3, Jiamin WU1, 2, Jun XIAO3, Yusheng SHI1, 2
Journal of the Chinese Ceramic Society | 2021, 49(9) : 1837 - 1845
Less
收藏切换
Journal of the Chinese Ceramic Society | 2021, 49(9): 1837-1845
• Additive Manufacturing of Ceramics—Research Article •
Mechanical and Biological Properties of ZrO2 Bioceramics by Stereolithography Technique
Full
Fen CHEN1, 2, Yaru WU1, 2, Hao ZHU3, Jiamin WU1, 2, Jun XIAO3, Yusheng SHI1, 2
Affiliations
  • 1.State Key Laboratory of Materials Processing and Die & Mould Technology, School of Materials Science and Engineering, Huazhong University of Science and Technology, Wuhan 430074, China
  • 2.Engineering Research Center of Ceramic Materials for Additive Manufacturing, Ministry of Education, Wuhan 430074, China
  • 3.Department of Orthopedic Surgery, Tongji Hospital, Tongji Medical College, Huazhong University of Science and Technology, 1095 Jiefang Avenue, Wuhan 430030, China

    • CHEN Fen (1997-), female, Master candidate. E-mail:

About Author:

CHEN Fen (1997-), female, Master candidate. E-mail:

Published: 2021-09-20 doi: 10.14062/j.issn.0454-5648.20210204
Outline
收藏切换

In order to use ZrO2 all-ceramic restorations in the dental field, ZrO2 slurry suitable for SL technology was obtained and ZrO2 bioceramic was prepared by SL. The mechanical properties and biocompatibility were investigated. The transformation from m-ZrO2 to t-ZrO2 or c-ZrO2 in the original ZrO2 powder was completed when sintered at different temperatures. The density of ceramic increases and the number of pores decreases as the sintering temperature increases, and the grain size increases and becomes uneven when the temperature further increases. The Vickers hardness and fracture toughness of ZrO2 bioceramic firstly increase and then decrease when the sintering temperature increases from 1 450℃ to 1 600℃, and they reach their maximum values (i.e., 14.87 GPa and 6.73 MPa·m1/2) at 1 500℃. The linear shrinkage and relative density are 23.42% and 97.32%, respectively. In addition, rat bone marrow mesenchymal stem cells (rBMSCs) were used for in vitro cell experiments, thus proving that ZrO2 bioceramic fabricated by SL technique have a good biocompatibility, which can have some application prospects in dental restoration.

additive manufacturing  /  zirconia  /  stereolithography  /  mechanical properties  /  biocompatibility
陈芬, 吴亚茹, 朱皓, 吴甲民, 肖骏, 史玉升. 氧化锆生物陶瓷的立体光固化制备及其力学与生物性能. 硅酸盐学报, 2021 , 49 (9) : 1837 -1845 . DOI: 10.14062/j.issn.0454-5648.20210204
Fen CHEN, Yaru WU, Hao ZHU, Jiamin WU, Jun XIAO, Yusheng SHI. Mechanical and Biological Properties of ZrO2 Bioceramics by Stereolithography Technique[J]. Journal of the Chinese Ceramic Society, 2021 , 49 (9) : 1837 -1845 . DOI: 10.14062/j.issn.0454-5648.20210204
Appendix
Less
Year 2021 volume 49 Issue 9
29
7
Cite this Article
BibTeX
Article Info
doi: 10.14062/j.issn.0454-5648.20210204
  • Receive Date：2021-03-27
  • Online Date：2026-10-30
  • Published：2021-09-20
Article Data
Affiliations
History
  • Received：2021-03-27
  • Revised：2021-04-19
Funding
Affiliations
    1.State Key Laboratory of Materials Processing and Die & Mould Technology, School of Materials Science and Engineering, Huazhong University of Science and Technology, Wuhan 430074, China
    2.Engineering Research Center of Ceramic Materials for Additive Manufacturing, Ministry of Education, Wuhan 430074, China
    3.Department of Orthopedic Surgery, Tongji Hospital, Tongji Medical College, Huazhong University of Science and Technology, 1095 Jiefang Avenue, Wuhan 430030, China

Corresponding:

WU Jiamin (1984-), male, Ph.D., Associate Professor. E-mail:
References
Share
https://castjournals.cast.org.cn/joweb/gsyxb/EN/10.14062/j.issn.0454-5648.20210204
Share to
QR

Scan QR to access full text

Cite this article
BibTeX
Citations
表12种不同金属材料的力学参数
科
Family		 属数
Number of
genus		 种数
Number of
species		 占总种数比例
Percentage of
total species (%)		 属
Genus		 种数
Number of
species		 占总种数比例
Percentage of total
species (%)
鹅膏菌科Amanitaceae 2 11 5.26 鹅膏菌属 Amanita 10 4.78
小菇科 Mycenaceae 2 12 5.74 丝盖伞属 Inocybe 5 2.39
多孔菌科 Polyporaceae 8 14 6.70 蜡蘑属 Laccaria 5 2.39
红菇科 Russulaceae 3 23 11.00 小皮伞属 Marasmius 6 2.87
小菇属 Mycena 11 5.26
光柄菇属 Pluteus 5 2.39
红菇属 Russula 17 8.13
栓菌属 Trametes 5 2.39
关闭全屏
  • BibTeX
  • EndNote
  • RefWorks
  • TxT
Links
Articles
Latest Articles
Most Read
Collections
Updates
Events
News
Multimedia
About
About Us
Contact
No. 86 Xueyuan South Road, Haidian District, Beijing
100081
010-62662699(Operation and Technical Support)
qkjq@cast.org.cn

Copyright © 2025 China Association for Science and Technology. All rights reserved. For all open access content, the relevant licensing terms apply.
Sponsored by the Office of the Leading Group for Cybersecurity and Informatization of CAST, and supported by Science and Technology Review Publishing House