Home Journals Articles Updates About
CN
image
收藏切换
Simulations on Glass Ribbon Forming Behavior in Float Process
收藏切换
Shuyong CHEN1, 2, 3, Congyun LI1, 2, 3, Zhaomeng WANG1, 2, 3, Liyun MA1, 2, 3, Zefang ZUO1, 2, 3
Journal of the Chinese Ceramic Society | 2021, 49(2) : 340 - 346
Less
收藏切换
Journal of the Chinese Ceramic Society | 2021, 49(2): 340-346
• Research Article •
Simulations on Glass Ribbon Forming Behavior in Float Process
Full
Shuyong CHEN1, 2, 3, Congyun LI1, 2, 3, Zhaomeng WANG1, 2, 3, Liyun MA1, 2, 3, Zefang ZUO1, 2, 3
Affiliations
  • 1.State Key Laboratory of Advanced Technology for Float Glass, Bengbu 233000, Anhui, China
  • 2.Silica-based Materials Laboratory of Anhui Province, Bengbu 233000, Anhui, China
  • 3.CNBM Bengbu Design and Research Institute for Glass Industry Co., Ltd., Bengbu 233018, Anhui, China

    • CHEN Shuyong (1987-), male, Ph.D., Senior Engineer. E-mail:

About Author:

CHEN Shuyong (1987-), male, Ph.D., Senior Engineer. E-mail:

Published: 2021-02-20 doi: 10.14062/j.issn.0454-5648.20200486
Outline
收藏切换

A three dimensional(3D) model and a thin-film model were proposed for the glass ribbon forming process in float process. The forming process of glass ribbon in a 600 t/d tin bath was simulated via a software named Ansys Polyflow. Compared to the 3D model, the thin-film model is demonstrated to be more accurate and effective for the simulation of glass ribbon forming process. According to the simulation results, the forming process of glass ribbon in each zone of the tin bath was discussed. The influences of longitudinal and transverse temperature distributions on the forming process were analyzed for glass ribbons with different thicknesses. Finally, the optimized forming temperature condition is obtained for glass ribbon with a thickness of 4 mm or 10 mm, respectively.

float  /  glass  /  forming  /  numerical simulation
陈淑勇, 李从云, 王照猛, 马立云, 左泽方. 浮法工艺玻璃带成形过程的模拟分析. 硅酸盐学报, 2021 , 49 (2) : 340 -346 . DOI: 10.14062/j.issn.0454-5648.20200486
Shuyong CHEN, Congyun LI, Zhaomeng WANG, Liyun MA, Zefang ZUO. Simulations on Glass Ribbon Forming Behavior in Float Process[J]. Journal of the Chinese Ceramic Society, 2021 , 49 (2) : 340 -346 . DOI: 10.14062/j.issn.0454-5648.20200486
Appendix
Less
Year 2021 volume 49 Issue 2
28
8
Cite this Article
BibTeX
Article Info
doi: 10.14062/j.issn.0454-5648.20200486
  • Receive Date：2020-06-30
  • Online Date：2026-10-30
  • Published：2021-02-20
Article Data
Affiliations
History
  • Received：2020-06-30
  • Revised：2020-07-16
Funding
Affiliations
    1.State Key Laboratory of Advanced Technology for Float Glass, Bengbu 233000, Anhui, China
    2.Silica-based Materials Laboratory of Anhui Province, Bengbu 233000, Anhui, China
    3.CNBM Bengbu Design and Research Institute for Glass Industry Co., Ltd., Bengbu 233018, Anhui, China
References
Share
https://castjournals.cast.org.cn/joweb/gsyxb/EN/10.14062/j.issn.0454-5648.20200486
Share to
QR

Scan QR to access full text

Cite this article
BibTeX
Citations
表12种不同金属材料的力学参数
科
Family		 属数
Number of
genus		 种数
Number of
species		 占总种数比例
Percentage of
total species (%)		 属
Genus		 种数
Number of
species		 占总种数比例
Percentage of total
species (%)
鹅膏菌科Amanitaceae 2 11 5.26 鹅膏菌属 Amanita 10 4.78
小菇科 Mycenaceae 2 12 5.74 丝盖伞属 Inocybe 5 2.39
多孔菌科 Polyporaceae 8 14 6.70 蜡蘑属 Laccaria 5 2.39
红菇科 Russulaceae 3 23 11.00 小皮伞属 Marasmius 6 2.87
小菇属 Mycena 11 5.26
光柄菇属 Pluteus 5 2.39
红菇属 Russula 17 8.13
栓菌属 Trametes 5 2.39
关闭全屏
  • BibTeX
  • EndNote
  • RefWorks
  • TxT
Links
Articles
Latest Articles
Most Read
Collections
Updates
Events
News
Multimedia
About
About Us
Contact
No. 86 Xueyuan South Road, Haidian District, Beijing
100081
010-62662699(Operation and Technical Support)
qkjq@cast.org.cn

Copyright © 2025 China Association for Science and Technology. All rights reserved. For all open access content, the relevant licensing terms apply.
Sponsored by the Office of the Leading Group for Cybersecurity and Informatization of CAST, and supported by Science and Technology Review Publishing House