收藏切换
Effect of Titanium Boride on Microstructure and Properties of Boron Carbide by Pressureless Sintering
收藏切换
Zongjia LI1, Jiamin ZHANG1, Huanwu CHENG1, 2, Yangwei WANG1, 2, Yu ZHU1, Rui AN1
Journal of the Chinese Ceramic Society | 2020, 48(3) : 356 - 361
Less
收藏切换
Journal of the Chinese Ceramic Society | 2020, 48(3): 356-361
Effect of Titanium Boride on Microstructure and Properties of Boron Carbide by Pressureless Sintering
Full
Zongjia LI1, Jiamin ZHANG1, Huanwu CHENG1, 2, Yangwei WANG1, 2, Yu ZHU1, Rui AN1
Affiliations
  • 1.School of Material Science and Engineering, Beijing Institute of Technology, Beijing 100081, China
  • 2.National Key Laboratory of Science and Technology on Materials under Shock and Impact, Beijing Institute of Technology, Beijing 100081, China
  • LI Zongjia (1995-), male, Master candidate. E-mai:

About Author:

LI Zongjia (1995-), male, Master candidate. E-mai:

Published: 2020-03-20 doi: 10.14062/j.issn.0454-5648.20190308
Outline
收藏切换

B4C-TiB2 multi-phase ceramics were prepared in a pressureless vacuum sintering-furnace at different temperatures with TiB2 added into B4C matrix as a second phase substance, and C and Si as sintering aids. The density, hardness, bending strength and fracture toughness of the samples were determined. The influences of composition ratio of B4C-TiB2 and sintering temperature on the microstructure and mechanical properties of the multiphase ceramics were investigated by X-ray diffraction, energy dispersive spectroscopy and scanning electron microscopy. The toughening mechanism of ceramics was discussed. The results show that the optimum density and comprehensive mechanical properties of the multiphase ceramics (i.e., the relative density of 94.59%, the Rockwell hardness of 87.62, the bending strength of 182 MPa, and the fracture toughness of 3.97 MPa·m1/2 can be obtained at a sintering temperature of 2 200 ℃ and TiB2 content of 30%. The TiB2 particles can effectively nail the grain boundary, inhibit the growth of B4C grains and play a role in fine-grain strengthening. The TiB2 and laminated graphite phase hinder the crack growth, thus improving the fracture toughness.

boron carbide  /  titanium boride  /  multiphase ceramics  /  pressureless sintering  /  toughening
李宗家, 张佳敏, 程焕武, 王扬卫, 朱宇, 安瑞. 硼化钛对无压烧结碳化硼结构和性能的影响. 硅酸盐学报, 2020 , 48 (3) : 356 -361 . DOI: 10.14062/j.issn.0454-5648.20190308
Zongjia LI, Jiamin ZHANG, Huanwu CHENG, Yangwei WANG, Yu ZHU, Rui AN. Effect of Titanium Boride on Microstructure and Properties of Boron Carbide by Pressureless Sintering[J]. Journal of the Chinese Ceramic Society, 2020 , 48 (3) : 356 -361 . DOI: 10.14062/j.issn.0454-5648.20190308
Year 2020 volume 48 Issue 3
23
6
Cite this Article
BibTeX
Article Info
doi: 10.14062/j.issn.0454-5648.20190308
  • Receive Date:2019-05-09
  • Online Date:2026-10-29
  • Published:2020-03-20
Article Data
Affiliations
History
  • Received:2019-05-09
  • Revised:2019-06-11
Affiliations
    1.School of Material Science and Engineering, Beijing Institute of Technology, Beijing 100081, China
    2.National Key Laboratory of Science and Technology on Materials under Shock and Impact, Beijing Institute of Technology, Beijing 100081, China

Corresponding:

CHENG Huanwu (1967-), male, PH.D., Associate Professor. E-mail:
References
Share
https://castjournals.cast.org.cn/joweb/gsyxb/EN/10.14062/j.issn.0454-5648.20190308
Share to
QR

Scan QR to access full text

Cite this article
BibTeX
Citations
表12种不同金属材料的力学参数
科
Family
属数
Number of
genus
种数
Number of
species
占总种数比例
Percentage of
total species (%)
属
Genus
种数
Number of
species
占总种数比例
Percentage of total
species (%)
鹅膏菌科Amanitaceae 2 11 5.26 鹅膏菌属 Amanita 10 4.78
小菇科 Mycenaceae 2 12 5.74 丝盖伞属 Inocybe 5 2.39
多孔菌科 Polyporaceae 8 14 6.70 蜡蘑属 Laccaria 5 2.39
红菇科 Russulaceae 3 23 11.00 小皮伞属 Marasmius 6 2.87
小菇属 Mycena 11 5.26
光柄菇属 Pluteus 5 2.39
红菇属 Russula 17 8.13
栓菌属 Trametes 5 2.39
关闭全屏
  • BibTeX
  • EndNote
  • RefWorks
  • TxT