收藏切换
Preparation and Compressive Elastic Moduli of Dendritic Mesoporous Silica Particles and Their Composites
收藏切换
Ailian CHEN1, 2, Xiangyu MA3, Wanying WANG3, Wenjie CAI3, Yang CHEN3
Journal of the Chinese Ceramic Society | 2020, 48(1) : 65 - 72
Less
收藏切换
Journal of the Chinese Ceramic Society | 2020, 48(1): 65-72
Preparation and Compressive Elastic Moduli of Dendritic Mesoporous Silica Particles and Their Composites
Full
Ailian CHEN1, 2, Xiangyu MA3, Wanying WANG3, Wenjie CAI3, Yang CHEN3
Affiliations
  • 1.School of Mechanical Engineering, Changzhou University, Changzhou 213164, Jiangsu, China
  • 2.Jiangsu Key Laboratory of Green Process Equipment, Changzhou 213164, Jiangsu, China
  • 3.School of Materials Science and Engineering, Changzhou University, Changzhou 213164, Jiangsu, China
  • CHEN Ailian (1975-), female, Ph.D., Associate Professor. E-mail:

About Author:

CHEN Ailian (1975-), female, Ph.D., Associate Professor. E-mail:

Published: 2020-01-20 doi: 10.14062/j.issn.0454-5648.20190127
Outline
收藏切换

Dendritic-like mesoporous silica particles (DMS) were prepared via a developed oil-water biphase stratification approach using cetyltrimethylammonium bromide, tetraethoxysilane, triethanolamine, and n-hexane as starting materials. The ceria nanoparticles were grafted onto the DMS surfaces using cerium nitrate as a cerium source and hexamethylene tetramine as a precipitant, and core/shell structured DMS/CeO2 composites were obtained. The samples were characterized by scanning electron microscopy, transmission electron microscopy, low-angle X-ray diffraction, selected area electron diffraction, and nitrogen adsorption-desorption analysis. The elastic contact between an individual particle and a probe was evaluated by atomic force microscopy. The compressive elastic moduli of the DMS particles before and after ceria coating were calculated by fitting the force curves based on the Derjaguin-Müller-Toporov model. The results show that the DMS samples (ca. 92 nm in particle size) have central-radial three-dimensional mesopores with an average pore size of 6.9 nm. The average particle size of DMS/CeO2 is about 106 nm, and the thin layer of ceria nanoparticles (i.e., 5-8 nm) is uniformly coated onto the cores. The compressive modulus of DMS particles is (3.7±1.2)GPa, further revealing that an enlarged pore size contributs to the elastic response enhancement for mesoporous silica materials. The compressive modulus of DMS/CeO2 [i.e., (6.6±1.9)GPa] is much lower than that of bulk ceria materials, and much closed to that of DMS cores. The elastic response of DMS/CeO2 derives from the cores, and the coated ceria nanoparticles contributed to the surface hardness enhancement.

dendritic-like mesoporous silica  /  composite particle  /  core/shell structure  /  compressive elastic modulus  /  atomic force microscopy
陈爱莲, 马翔宇, 王婉莹, 蔡文杰, 陈杨. 树枝状介孔氧化硅及其复合颗粒的制备和压缩弹性模量. 硅酸盐学报, 2020 , 48 (1) : 65 -72 . DOI: 10.14062/j.issn.0454-5648.20190127
Ailian CHEN, Xiangyu MA, Wanying WANG, Wenjie CAI, Yang CHEN. Preparation and Compressive Elastic Moduli of Dendritic Mesoporous Silica Particles and Their Composites[J]. Journal of the Chinese Ceramic Society, 2020 , 48 (1) : 65 -72 . DOI: 10.14062/j.issn.0454-5648.20190127
Year 2020 volume 48 Issue 1
26
6
Cite this Article
BibTeX
Article Info
doi: 10.14062/j.issn.0454-5648.20190127
  • Receive Date:2019-02-28
  • Online Date:2026-10-29
  • Published:2020-01-20
Article Data
Affiliations
History
  • Received:2019-02-28
  • Revised:2019-03-22
Funding
Affiliations
    1.School of Mechanical Engineering, Changzhou University, Changzhou 213164, Jiangsu, China
    2.Jiangsu Key Laboratory of Green Process Equipment, Changzhou 213164, Jiangsu, China
    3.School of Materials Science and Engineering, Changzhou University, Changzhou 213164, Jiangsu, China

Corresponding:

CHEN Yang (1978-), male, Ph.D., Associate Professor. E-mail:
References
Share
https://castjournals.cast.org.cn/joweb/gsyxb/EN/10.14062/j.issn.0454-5648.20190127
Share to
QR

Scan QR to access full text

Cite this article
BibTeX
Citations
表12种不同金属材料的力学参数
科
Family
属数
Number of
genus
种数
Number of
species
占总种数比例
Percentage of
total species (%)
属
Genus
种数
Number of
species
占总种数比例
Percentage of total
species (%)
鹅膏菌科Amanitaceae 2 11 5.26 鹅膏菌属 Amanita 10 4.78
小菇科 Mycenaceae 2 12 5.74 丝盖伞属 Inocybe 5 2.39
多孔菌科 Polyporaceae 8 14 6.70 蜡蘑属 Laccaria 5 2.39
红菇科 Russulaceae 3 23 11.00 小皮伞属 Marasmius 6 2.87
小菇属 Mycena 11 5.26
光柄菇属 Pluteus 5 2.39
红菇属 Russula 17 8.13
栓菌属 Trametes 5 2.39
关闭全屏
  • BibTeX
  • EndNote
  • RefWorks
  • TxT