Full
WU Yu (1986-), male, Doctor candidate, Senior Engineer. E-mail: wuyu_ah@163.com
Outline
Optoelectronic functional films and devices are widely used for applications in flat display, solid-state lighting, information transmission and storage, new energy and photochemistry. The research highlights in this field rely on developing protocols for further improving their performance. Additive manufacture, that is 3D printing as a simple, high-precision, no mold-required, material-saving, personalized and batch-oriented intelligent fabrication technology, has attracted recent attention. This review reported the major additive manufacture techniques for developing optoelectronic functional films and devices and their research progress via highlighting inkjet printing, electrohydrodynamic printing and direct writing capable of printing optoelectronic functional films with three-dimensional structures and deliberating the challenges in realizing complex shape and in-situ multiscale modulation in microstructure. Aerosol jet printing was emphasized with great potential for simultaneously controlling the nano-and micro-structures during printing optoelectronic functional films via exploiting the microreactor capabilities of aerosols. Carbon-based materials and MXene were taken as examples for demonstrating the functionality and applicability of additive manufacture techniques in printing optoelectronic functional films and devices. Recent studies on the additive manufacturing of advanced optoelectronic functional materials and devices were summarized, i.e., developing new material and ink formulation, printing process control and new additive manufacturing processes. In addition, the future development was also prospected for next-generation additive manufacture protocols endowing the functionality of in-situ multiscale modulation of microstructures during the printing process, thus favoring the development of high-performance optoelectronic functional materials and devices in the future.
13
2
| 科 Family | 属数 Number of genus | 种数 Number of species | 占总种数比例 Percentage of total species (%) | 属 Genus | 种数 Number of species | 占总种数比例 Percentage of total species (%) |
|---|---|---|---|---|---|---|
| 鹅膏菌科Amanitaceae | 2 | 11 | 5.26 | 鹅膏菌属 Amanita | 10 | 4.78 |
| 小菇科 Mycenaceae | 2 | 12 | 5.74 | 丝盖伞属 Inocybe | 5 | 2.39 |
| 多孔菌科 Polyporaceae | 8 | 14 | 6.70 | 蜡蘑属 Laccaria | 5 | 2.39 |
| 红菇科 Russulaceae | 3 | 23 | 11.00 | 小皮伞属 Marasmius | 6 | 2.87 |
| 小菇属 Mycena | 11 | 5.26 | ||||
| 光柄菇属 Pluteus | 5 | 2.39 | ||||
| 红菇属 Russula | 17 | 8.13 | ||||
| 栓菌属 Trametes | 5 | 2.39 |
关闭全屏
No. 86 Xueyuan South Road, Haidian District, Beijing
010-62662699(Operation and Technical Support)
qkjq@cast.org.cn
Copyright © 2025 China Association for Science and Technology. All rights reserved. For all open access content, the relevant licensing terms apply.
Sponsored by the Office of the Leading Group for Cybersecurity and Informatization of CAST, and supported by Science and Technology Review Publishing House
