收藏切换
High-Performance Anode-Supported Solid Oxide Fuel Cells Prepared by Tape Casting Technique
收藏切换
Kai TAN1, Xiaoming YAN1, Fengyuan TIAN1, 2, Meirong XIA1, Mingyang ZHOU1, Jiang LIU1
Journal of the Chinese Ceramic Society | 2022, 50(6) : 1661 - 1668
Less
收藏切换
Journal of the Chinese Ceramic Society | 2022, 50(6): 1661-1668
• Research Articles •
High-Performance Anode-Supported Solid Oxide Fuel Cells Prepared by Tape Casting Technique
Full
Kai TAN1, Xiaoming YAN1, Fengyuan TIAN1, 2, Meirong XIA1, Mingyang ZHOU1, Jiang LIU1
Affiliations
  • 1.School of Environment and Energy, South China University of Technology, Guangzhou 510006, China
  • 2.Southwest Technology and Engineering Research Institute, Chongqing 400039, China
  • TAN Kai (1997-), male, Master candidate. E-mail:

About Author:

TAN Kai (1997-), male, Master candidate. E-mail:

Published: 2022-06-20 doi: 10.14062/j.issn.0454-5648.20210946
Outline
收藏切换

The development of high-performance anode-supported solid oxide fuel cells (SOFCs) contributes to reducing the working temperature of SOFCs, and the preparation process and structural parameters of cells have a significant impact on the performance. Tape casting is a cheap and mass-produced cell fabrication method. In this paper, anode-supported SOFCs were prepared by a tape casting technique. The effects of pore-former type in anode support, the thickness and porosity of the anode functional layer and the thickness of the electrolyte on the SOFC performances were investigated. An anode functional layer with the thickness of about 12 μm was prepared when PMMA was used as a pore-former of the anode support, thus obtaining a preferred anode structure. Reducing the thickness of the electrolyte can reduce the ohmic resistance, but a too thin electrolyte can lead to the insufficient strength of electrolyte, affecting the stable operation of SOFCs. An anode-supported SOFC with the optimized anode and an electrolyte thickness of 8 μm has a peak power density of 1.2 W·cm-2 at 800 ℃.

solid oxide fuel cell  /  tape casting  /  anode-supported  /  pore-former  /  anode functional layer
谭楷, 颜晓敏, 田丰源, 夏美荣, 周明扬, 刘江. 流延成型法制备高性能阳极支撑固体氧化物燃料电池. 硅酸盐学报, 2022 , 50 (6) : 1661 -1668 . DOI: 10.14062/j.issn.0454-5648.20210946
Kai TAN, Xiaoming YAN, Fengyuan TIAN, Meirong XIA, Mingyang ZHOU, Jiang LIU. High-Performance Anode-Supported Solid Oxide Fuel Cells Prepared by Tape Casting Technique[J]. Journal of the Chinese Ceramic Society, 2022 , 50 (6) : 1661 -1668 . DOI: 10.14062/j.issn.0454-5648.20210946
Year 2022 volume 50 Issue 6
14
1
Cite this Article
BibTeX
Article Info
doi: 10.14062/j.issn.0454-5648.20210946
  • Receive Date:2021-11-05
  • Online Date:2026-10-22
  • Published:2022-06-20
Article Data
Affiliations
History
  • Received:2021-11-05
  • Revised:2021-12-23
Funding
Affiliations
    1.School of Environment and Energy, South China University of Technology, Guangzhou 510006, China
    2.Southwest Technology and Engineering Research Institute, Chongqing 400039, China

Corresponding:

LIU Jiang (1963-), Female, Ph.D., Professor. E-mail:
References
Share
https://castjournals.cast.org.cn/joweb/gsyxb/EN/10.14062/j.issn.0454-5648.20210946
Share to
QR

Scan QR to access full text

Cite this article
BibTeX
Citations
表12种不同金属材料的力学参数
科
Family
属数
Number of
genus
种数
Number of
species
占总种数比例
Percentage of
total species (%)
属
Genus
种数
Number of
species
占总种数比例
Percentage of total
species (%)
鹅膏菌科Amanitaceae 2 11 5.26 鹅膏菌属 Amanita 10 4.78
小菇科 Mycenaceae 2 12 5.74 丝盖伞属 Inocybe 5 2.39
多孔菌科 Polyporaceae 8 14 6.70 蜡蘑属 Laccaria 5 2.39
红菇科 Russulaceae 3 23 11.00 小皮伞属 Marasmius 6 2.87
小菇属 Mycena 11 5.26
光柄菇属 Pluteus 5 2.39
红菇属 Russula 17 8.13
栓菌属 Trametes 5 2.39
关闭全屏
  • BibTeX
  • EndNote
  • RefWorks
  • TxT