收藏切换
Low-cost Preparation of Porous Ceramic Supports Using Natural Minerals
收藏切换
Feng WANG1, Zhiyong HE1, Zhipeng XIE2, Shijie ZHOU3
Journal of the Chinese Ceramic Society | 2022, 50(6) : 1566 - 1571
Less
收藏切换
Journal of the Chinese Ceramic Society | 2022, 50(6): 1566-1571
• Research Articles •
Low-cost Preparation of Porous Ceramic Supports Using Natural Minerals
Full
Feng WANG1, Zhiyong HE1, Zhipeng XIE2, Shijie ZHOU3
Affiliations
  • 1.China Iron & Steel Research Institute Group, Beijing 100081, China
  • 2.School of Materials Science and Engineering, Tsinghua University, Beijing 100084, China
  • 3.Central Iron & Steel Research Institute, Beijing 100081, China
  • WANG Feng (1983-), Ph.D., Senior Engineer. E-mail:

About Author:

WANG Feng (1983-), Ph.D., Senior Engineer. E-mail:

Published: 2022-06-20 doi: 10.14062/j.issn.0454-5648.20210647
Outline
收藏切换

The base application of porous ceramic membrane is ceramic support. For conventional ceramic supports (such as alumina), the expensive raw materials and high sintering cost both restrict their applications. Therefore, the low-cost preparation of ceramic support with natural minerals has attracted more attention. In this paper, a series of porous ceramic supports were fabricated with kaolin clay, talc and calcium carbonate as raw materials. The sintering characteristic of the green body was analyzed by thermal expansion instrument. The phase composition, micro-structure, pore size distribution and bending strength were characterized by X-ray diffractometer, scanning electron microscope, mercury porosimeter and universal testing machine. The acid and alkali corrosion resistances of the supports were also investigated. The results indicate that the obtained green body exhibits a superior low-temperature sintering characteristic. The porous supports were prepared via chemical reaction sintering. The suitable sintering temperatures of the supports are in the range of 1 000-1 200 ℃. The obtained supports have a homogeneous micro-structure and a unimodal pore size distribution. The porous supports prepared at 1 000-1 200 ℃ have the open porosities of 49.8%-49.4%, the average pore sizes of 1.09-1.83 μm, the bending strengths of 40.57-28.85 MPa, the nitrogen gas flux of 119-340 m3·m-2·h-1 under a trans-membrane pressure of 0.1 MPa and a superior alkali resistance as well.

natural mineral  /  porous ceramic support  /  sintering characteristic  /  microstructure  /  nitrogen gas flux
王峰, 贺智勇, 谢志鹏, 周士杰. 天然矿物低成本制备多孔陶瓷支撑体. 硅酸盐学报, 2022 , 50 (6) : 1566 -1571 . DOI: 10.14062/j.issn.0454-5648.20210647
Feng WANG, Zhiyong HE, Zhipeng XIE, Shijie ZHOU. Low-cost Preparation of Porous Ceramic Supports Using Natural Minerals[J]. Journal of the Chinese Ceramic Society, 2022 , 50 (6) : 1566 -1571 . DOI: 10.14062/j.issn.0454-5648.20210647
Year 2022 volume 50 Issue 6
19
4
Cite this Article
BibTeX
Article Info
doi: 10.14062/j.issn.0454-5648.20210647
  • Receive Date:2021-08-04
  • Online Date:2026-10-22
  • Published:2022-06-20
Article Data
Affiliations
History
  • Received:2021-08-04
  • Revised:2021-10-14
Affiliations
    1.China Iron & Steel Research Institute Group, Beijing 100081, China
    2.School of Materials Science and Engineering, Tsinghua University, Beijing 100084, China
    3.Central Iron & Steel Research Institute, Beijing 100081, China
References
Share
https://castjournals.cast.org.cn/joweb/gsyxb/EN/10.14062/j.issn.0454-5648.20210647
Share to
QR

Scan QR to access full text

Cite this article
BibTeX
Citations
表12种不同金属材料的力学参数
科
Family
属数
Number of
genus
种数
Number of
species
占总种数比例
Percentage of
total species (%)
属
Genus
种数
Number of
species
占总种数比例
Percentage of total
species (%)
鹅膏菌科Amanitaceae 2 11 5.26 鹅膏菌属 Amanita 10 4.78
小菇科 Mycenaceae 2 12 5.74 丝盖伞属 Inocybe 5 2.39
多孔菌科 Polyporaceae 8 14 6.70 蜡蘑属 Laccaria 5 2.39
红菇科 Russulaceae 3 23 11.00 小皮伞属 Marasmius 6 2.87
小菇属 Mycena 11 5.26
光柄菇属 Pluteus 5 2.39
红菇属 Russula 17 8.13
栓菌属 Trametes 5 2.39
关闭全屏
  • BibTeX
  • EndNote
  • RefWorks
  • TxT