Home Journals Articles Updates About
CN
image
收藏切换
Anisotropy Control and High-Temperature Strengthening of Silica Ceramic Cores Fabricated by 3D Printing
收藏切换
Xiqing XU1, Jiaxian FAN1, Shuxin NIU2, Xin LI2, Qiang ZHANG2, Jie LI1
Journal of the Chinese Ceramic Society | 2022, 50(9) : 2422 - 2429
Less
收藏切换
Journal of the Chinese Ceramic Society | 2022, 50(9): 2422-2429
• Research Articles •
Anisotropy Control and High-Temperature Strengthening of Silica Ceramic Cores Fabricated by 3D Printing
Full
Xiqing XU1, Jiaxian FAN1, Shuxin NIU2, Xin LI2, Qiang ZHANG2, Jie LI1
Affiliations
  • 1.School of Materials Science and Engineering, Chang'an University, Xi'an 710061, China
  • 2.Science and Technology on Advanced High Temperature Structural Materials Laboratory, Beijing Institute of Aeronautical Materials, Beijing 100095

    • XU Xiqing (1990-), male, Ph.D., Lecturer. E-mail:

About Author:

XU Xiqing (1990-), male, Ph.D., Lecturer. E-mail:

Published: 2022-09-20 doi: 10.14062/j.issn.0454-5648.20210977
Outline
收藏切换

Investigation on 3D printing of silica ceramic cores is crucial to the development of aviation level in China, but the related problems are high-temperature softening and structural anisotropy. Silica ceramic cores were fabricated by DLP light curing 3D printing technology using fused silica powder as a raw material and mullite powder as a modifier. The results show that the ceramic cores have a layer-packed anisotropic structure. The addition of a small amount of mullite powder promotes the sintering densification of ceramic powder and diffusion binding between printing layers. As a result, the structural anisotropy of ceramic cores is relieved, and the flexural strength is enhanced and tended to isotropy. For ceramic cores with 3% mullite powder, the high-temperature flexural strengths in horizontal and vertical printing are up to 18.5 MPa and 16.3 MPa, respectively, which can satisfy the demands for hollow blade casting.

silica ceramic cores  /  3D printing  /  mullite  /  anisotropy  /  high-temperature strength
许西庆, 樊嘉显, 牛书鑫, 李鑫, 张强, 李杰. 3D打印氧化硅陶瓷型芯的各向异性调控及高温强化性能. 硅酸盐学报, 2022 , 50 (9) : 2422 -2429 . DOI: 10.14062/j.issn.0454-5648.20210977
Xiqing XU, Jiaxian FAN, Shuxin NIU, Xin LI, Qiang ZHANG, Jie LI. Anisotropy Control and High-Temperature Strengthening of Silica Ceramic Cores Fabricated by 3D Printing[J]. Journal of the Chinese Ceramic Society, 2022 , 50 (9) : 2422 -2429 . DOI: 10.14062/j.issn.0454-5648.20210977
Appendix
Less
Year 2022 volume 50 Issue 9
27
4
Cite this Article
BibTeX
Article Info
doi: 10.14062/j.issn.0454-5648.20210977
  • Receive Date：2021-11-16
  • Online Date：2026-10-20
  • Published：2022-09-20
Article Data
Affiliations
History
  • Received：2021-11-16
  • Revised：2022-01-17
Funding
Affiliations
    1.School of Materials Science and Engineering, Chang'an University, Xi'an 710061, China
    2.Science and Technology on Advanced High Temperature Structural Materials Laboratory, Beijing Institute of Aeronautical Materials, Beijing 100095
References
Share
https://castjournals.cast.org.cn/joweb/gsyxb/EN/10.14062/j.issn.0454-5648.20210977
Share to
QR

Scan QR to access full text

Cite this article
BibTeX
Citations
表12种不同金属材料的力学参数
科
Family		 属数
Number of
genus		 种数
Number of
species		 占总种数比例
Percentage of
total species (%)		 属
Genus		 种数
Number of
species		 占总种数比例
Percentage of total
species (%)
鹅膏菌科Amanitaceae 2 11 5.26 鹅膏菌属 Amanita 10 4.78
小菇科 Mycenaceae 2 12 5.74 丝盖伞属 Inocybe 5 2.39
多孔菌科 Polyporaceae 8 14 6.70 蜡蘑属 Laccaria 5 2.39
红菇科 Russulaceae 3 23 11.00 小皮伞属 Marasmius 6 2.87
小菇属 Mycena 11 5.26
光柄菇属 Pluteus 5 2.39
红菇属 Russula 17 8.13
栓菌属 Trametes 5 2.39
关闭全屏
  • BibTeX
  • EndNote
  • RefWorks
  • TxT
Links
Articles
Latest Articles
Most Read
Collections
Updates
Events
News
Multimedia
About
About Us
Contact
No. 86 Xueyuan South Road, Haidian District, Beijing
100081
010-62662699(Operation and Technical Support)
qkjq@cast.org.cn

Copyright © 2025 China Association for Science and Technology. All rights reserved. For all open access content, the relevant licensing terms apply.
Sponsored by the Office of the Leading Group for Cybersecurity and Informatization of CAST, and supported by Science and Technology Review Publishing House