收藏切换
Structure Design of Brazed Joint Interface Between PZT Piezoelectric Ceramic and TC4 Titanium Alloy
收藏切换
Haiying XIAO1, 2, Shuye ZHANG1, Wumo DU1, Panpan LIN1, Tiesong LIN1
Journal of the Chinese Ceramic Society | 2022, 50(9) : 2430 - 2438
Less
收藏切换
Journal of the Chinese Ceramic Society | 2022, 50(9): 2430-2438
• Research Articles •
Structure Design of Brazed Joint Interface Between PZT Piezoelectric Ceramic and TC4 Titanium Alloy
Full
Haiying XIAO1, 2, Shuye ZHANG1, Wumo DU1, Panpan LIN1, Tiesong LIN1
Affiliations
  • 1.State Key Laboratory of Advanced Welding and Joining, Harbin Institute of Technology, Harbin 150001, China
  • 2.School of Materials Science and Engineering, Harbin Institute of Technology, Harbin 150001, China
  • XIAO Haiying (1976-), female, Ph.D., Associate Professor. E-mail:

About Author:

XIAO Haiying (1976-), female, Ph.D., Associate Professor. E-mail:

Published: 2022-09-20 doi: 10.14062/j.issn.0454-5648.20210912
Outline
收藏切换

Piezoelectric ceramics are used in the manufacture of ultrasonic motor because of its inverse piezoelectric effect. However, some problems of poor joint conductivity, easy aging and low connection accuracy caused by organic bonding in the manufacture of ultrasonic motor need to be solved. In this paper, the surface of PZT piezoelectric ceramics was metallized via magnetron sputtering to improve the weldability between PZT piezoelectric ceramic and TC4 titanium alloy. The results show that the bonding force between Ag and base metal is poor, and the unwelded position appears at the junction of Ag layer and base metal. The welding is easy to occur at the junction of Ti and Ag when Ti/Ag is a metallized layer due to the poor bonding force between Ag and Ti. Ni and solder can form Ni-Sn layer to improve the joint reliability when the metallized layer is Ni/Ag. A composite metal layer, that is, the base metal/Ti/Ni/Ag structure, was selected as a metallized layer on the base metal surface, and the typical microstructure of the joint was analyzed. The results show that the composite metal layer can improve the bonding strength between the metallized layer and the base metal and realize the effective bonding between the BASE metal of PZT ceramics and TC4 alloy. The microstructure of the interface is β-Sn/Ag3Sn/β-Sn+Ni3Sn4/Ni3Sn+Ni/Ti2Ni/Ti2Ni+α-Ti/PZT.

lead zirconate titanate ceramics  /  magnetron sputtering  /  surface metallization  /  Ti6Al4V titanium alloy  /  indirect brazing
肖海英, 张书野, 杜勿默, 林盼盼, 林铁松. PZT压电陶瓷与TC4合金钎焊连接界面结构设计. 硅酸盐学报, 2022 , 50 (9) : 2430 -2438 . DOI: 10.14062/j.issn.0454-5648.20210912
Haiying XIAO, Shuye ZHANG, Wumo DU, Panpan LIN, Tiesong LIN. Structure Design of Brazed Joint Interface Between PZT Piezoelectric Ceramic and TC4 Titanium Alloy[J]. Journal of the Chinese Ceramic Society, 2022 , 50 (9) : 2430 -2438 . DOI: 10.14062/j.issn.0454-5648.20210912
Year 2022 volume 50 Issue 9
24
5
Cite this Article
BibTeX
Article Info
doi: 10.14062/j.issn.0454-5648.20210912
  • Receive Date:2021-10-25
  • Online Date:2026-10-20
  • Published:2022-09-20
Article Data
Affiliations
History
  • Received:2021-10-25
  • Revised:2021-11-19
Funding
Affiliations
    1.State Key Laboratory of Advanced Welding and Joining, Harbin Institute of Technology, Harbin 150001, China
    2.School of Materials Science and Engineering, Harbin Institute of Technology, Harbin 150001, China

Corresponding:

LIN Tiesong (1978-), male, Ph.D., Professor. E-mail:
References
Share
https://castjournals.cast.org.cn/joweb/gsyxb/EN/10.14062/j.issn.0454-5648.20210912
Share to
QR

Scan QR to access full text

Cite this article
BibTeX
Citations
表12种不同金属材料的力学参数
科
Family
属数
Number of
genus
种数
Number of
species
占总种数比例
Percentage of
total species (%)
属
Genus
种数
Number of
species
占总种数比例
Percentage of total
species (%)
鹅膏菌科Amanitaceae 2 11 5.26 鹅膏菌属 Amanita 10 4.78
小菇科 Mycenaceae 2 12 5.74 丝盖伞属 Inocybe 5 2.39
多孔菌科 Polyporaceae 8 14 6.70 蜡蘑属 Laccaria 5 2.39
红菇科 Russulaceae 3 23 11.00 小皮伞属 Marasmius 6 2.87
小菇属 Mycena 11 5.26
光柄菇属 Pluteus 5 2.39
红菇属 Russula 17 8.13
栓菌属 Trametes 5 2.39
关闭全屏
  • BibTeX
  • EndNote
  • RefWorks
  • TxT