Home Journals Articles Updates About
CN
image
收藏切换
Preparation and Properties of Yttria Stabilized Zirconia Electrolyte for Solid Oxide Fuel Cell by Plasma Spraying
收藏切换
Ke DU1, 2, Chen SONG1, Min YU2, Dan CHEN1, Yu GUO1, Taikai LIU1, Chenghao YANG3, Min LIU1
Journal of the Chinese Ceramic Society | 2022, 50(7) : 1929 - 1935
Less
收藏切换
Journal of the Chinese Ceramic Society | 2022, 50(7): 1929-1935
• Research Articles •
Preparation and Properties of Yttria Stabilized Zirconia Electrolyte for Solid Oxide Fuel Cell by Plasma Spraying
Full
Ke DU1, 2, Chen SONG1, Min YU2, Dan CHEN1, Yu GUO1, Taikai LIU1, Chenghao YANG3, Min LIU1
Affiliations
  • 1.Institute of New Materials, Guangdong Academy of Sciences, National Engineering Laboratory for Modern Materials Surface Engineering Technology, The Key Lab of Guangdong for Modern Surface Engineering Technology, Guangzhou 510650, China
  • 2.School of Materials Science and Engineering, Southwest Jiaotong University, Chengdu 610031, China
  • 3.School of Environment and Energy, South China University of Technology, Guangzhou 510006, China

    • DU Ke (1996-), male, Master candidate. E-mail:

About Author:

DU Ke (1996-), male, Master candidate. E-mail:

Published: 2022-07-20 doi: 10.14062/j.issn.0454-5648.20210955
Outline
收藏切换

Metal-supported solid oxide fuel cells have promising applications. However, there is no the corresponding cost-effective preparation technology. Yttria stabilized zirconia (YSZ) electrolyte of solid oxide fuel cell was fabricated on a meatal substrate via high-efficiency and low-cost atmospheric plasma spraying (APS). The relationship between depositional particle morphology and coating structure under heating matrix conditions was investigated. The mechanical properties of electrolyte and cell out performance were evaluated. The results indicate that YSZ deposition particles on the heated substrate are fully spread. However, some microcracks appear in the splats, leading to some vertical cracks and interlamellar unbonded-interfaces inside the coating, the porosity is 7.16%, and nanoindentation hardness and elastic modulus of YSZ electrolyte are (13±1.04) GPa and (188.5±2.59) GPa, respectively. The maximum open voltage of cell with YSZ electrolyte deposited by APS is 0.97 V, thus improving the density. Nevertheless, the cell out performance is quite considerable with a peak power density of 850 mW/cm2 at 900 ℃. After the optimization of equipment iteration or combined with the post-treatment process, APS can be used to obtain alarge-scale and low-cost preparation of dense YSZ electrolytes.

solid oxide fuel cell  /  yttria stabilized zirconia  /  atmospheric plasma spraying  /  electrolyte
杜柯, 宋琛, 余敏, 陈丹, 郭宇, 刘太楷, 杨成浩, 刘敏. 固体氧化物燃料电池氧化钇稳定氧化锆电解质的等离子喷涂制备及性能. 硅酸盐学报, 2022 , 50 (7) : 1929 -1935 . DOI: 10.14062/j.issn.0454-5648.20210955
Ke DU, Chen SONG, Min YU, Dan CHEN, Yu GUO, Taikai LIU, Chenghao YANG, Min LIU. Preparation and Properties of Yttria Stabilized Zirconia Electrolyte for Solid Oxide Fuel Cell by Plasma Spraying[J]. Journal of the Chinese Ceramic Society, 2022 , 50 (7) : 1929 -1935 . DOI: 10.14062/j.issn.0454-5648.20210955
Appendix
Less
Year 2022 volume 50 Issue 7
46
3
Cite this Article
BibTeX
Article Info
doi: 10.14062/j.issn.0454-5648.20210955
  • Receive Date：2021-11-10
  • Online Date：2026-10-20
  • Published：2022-07-20
Article Data
Affiliations
History
  • Received：2021-11-10
  • Revised：2022-01-08
Funding
Affiliations
    1.Institute of New Materials, Guangdong Academy of Sciences, National Engineering Laboratory for Modern Materials Surface Engineering Technology, The Key Lab of Guangdong for Modern Surface Engineering Technology, Guangzhou 510650, China
    2.School of Materials Science and Engineering, Southwest Jiaotong University, Chengdu 610031, China
    3.School of Environment and Energy, South China University of Technology, Guangzhou 510006, China

Corresponding:

SONG Chen (1990-), male, Ph.D.. E-mail:
References
Share
https://castjournals.cast.org.cn/joweb/gsyxb/EN/10.14062/j.issn.0454-5648.20210955
Share to
QR

Scan QR to access full text

Cite this article
BibTeX
Citations
表12种不同金属材料的力学参数
科
Family		 属数
Number of
genus		 种数
Number of
species		 占总种数比例
Percentage of
total species (%)		 属
Genus		 种数
Number of
species		 占总种数比例
Percentage of total
species (%)
鹅膏菌科Amanitaceae 2 11 5.26 鹅膏菌属 Amanita 10 4.78
小菇科 Mycenaceae 2 12 5.74 丝盖伞属 Inocybe 5 2.39
多孔菌科 Polyporaceae 8 14 6.70 蜡蘑属 Laccaria 5 2.39
红菇科 Russulaceae 3 23 11.00 小皮伞属 Marasmius 6 2.87
小菇属 Mycena 11 5.26
光柄菇属 Pluteus 5 2.39
红菇属 Russula 17 8.13
栓菌属 Trametes 5 2.39
关闭全屏
  • BibTeX
  • EndNote
  • RefWorks
  • TxT
Links
Articles
Latest Articles
Most Read
Collections
Updates
Events
News
Multimedia
About
About Us
Contact
No. 86 Xueyuan South Road, Haidian District, Beijing
100081
010-62662699(Operation and Technical Support)
qkjq@cast.org.cn

Copyright © 2025 China Association for Science and Technology. All rights reserved. For all open access content, the relevant licensing terms apply.
Sponsored by the Office of the Leading Group for Cybersecurity and Informatization of CAST, and supported by Science and Technology Review Publishing House