收藏切换
Mechanical and Oxidation Resistance of SiC Based Composite Ceramics Reinforced with B4C
收藏切换
jiaxin CHEN1, Qihang ZENG1, Feng WANG2, Ping'an CHEN1, Xiangcheng LI1, Yingli ZHU1, Boquan ZHU1
Journal of the Chinese Ceramic Society | 2023, 51(3) : 730 - 737
Less
收藏切换
Journal of the Chinese Ceramic Society | 2023, 51(3): 730-737
• Research Articles •
Mechanical and Oxidation Resistance of SiC Based Composite Ceramics Reinforced with B4C
Full
jiaxin CHEN1, Qihang ZENG1, Feng WANG2, Ping'an CHEN1, Xiangcheng LI1, Yingli ZHU1, Boquan ZHU1
Affiliations
  • 1.The State Key Laboratory of Refractories and Metallurgy, Wuhan University of Science and Technology, Wuhan 430081, China
  • 2.Qingdao Almatis Co., Ltd., Qingdao 266510, Shandong, China
  • CHEN Jiaxin (1998-), male, Master candidate. E-mail:

About Author:

CHEN Jiaxin (1998-), male, Master candidate. E-mail:

Published: 2023-03-20 doi: 10.14062/j.issn.0454-5648.20220648
Outline
收藏切换

The effects of B4C addition and heat treatment temperature on the microstructure, mechanical properties and oxide resistance of SiC-based composite ceramics were investigated. The results show that the addition of B4C can improve the crystallinity and graphitization of SiC. The linear change rate of SiC-based composite ceramics decreases from 1.39% to 0.58%. The flexural strength and compressive strength are increased by 1.8 times and 2 times (i.e., from 28.06 MPa to 50.25 MPa and from 48.03Pa to 98.58 MPa), respectively, after heat treatment at 1 450 ℃ at B4C addition of 6% (in mass fraction). The oxidation index of SiC-based composite ceramics decreases from 30.33% to 18.35% after oxidation at 1 400 ℃, and the thickness of the oxide layer decreases substantially from 3.52 mm to 0.23 mm with the increase of B4C addition from 0 to 6%. Therefore, adding B4C can enhance the amount of SiC whiskers and the strength and oxidation resistance of SiC-based composite ceramics as well.

silicon carbide-based composite ceramics  /  boron carbide  /  mechanical properties  /  oxidation resistance
陈家鑫, 曾启航, 王峰, 陈平安, 李享成, 朱颖丽, 朱伯铨. B4C增强SiC基复合陶瓷力学性能和抗氧化性能. 硅酸盐学报, 2023 , 51 (3) : 730 -737 . DOI: 10.14062/j.issn.0454-5648.20220648
jiaxin CHEN, Qihang ZENG, Feng WANG, Ping'an CHEN, Xiangcheng LI, Yingli ZHU, Boquan ZHU. Mechanical and Oxidation Resistance of SiC Based Composite Ceramics Reinforced with B4C[J]. Journal of the Chinese Ceramic Society, 2023 , 51 (3) : 730 -737 . DOI: 10.14062/j.issn.0454-5648.20220648
Year 2023 volume 51 Issue 3
29
3
Cite this Article
BibTeX
Article Info
doi: 10.14062/j.issn.0454-5648.20220648
  • Receive Date:2022-08-08
  • Online Date:2026-10-20
  • Published:2023-03-20
Article Data
Affiliations
History
  • Received:2022-08-08
  • Revised:2022-08-26
Funding
Affiliations
    1.The State Key Laboratory of Refractories and Metallurgy, Wuhan University of Science and Technology, Wuhan 430081, China
    2.Qingdao Almatis Co., Ltd., Qingdao 266510, Shandong, China

Corresponding:

CHEN Ping'an (1986-), male, Ph.D., Associate Professor; E-mail:
LI Xiangcheng (1978-), male, Ph.D., Professor.
References
Share
https://castjournals.cast.org.cn/joweb/gsyxb/EN/10.14062/j.issn.0454-5648.20220648
Share to
QR

Scan QR to access full text

Cite this article
BibTeX
Citations
表12种不同金属材料的力学参数
科
Family
属数
Number of
genus
种数
Number of
species
占总种数比例
Percentage of
total species (%)
属
Genus
种数
Number of
species
占总种数比例
Percentage of total
species (%)
鹅膏菌科Amanitaceae 2 11 5.26 鹅膏菌属 Amanita 10 4.78
小菇科 Mycenaceae 2 12 5.74 丝盖伞属 Inocybe 5 2.39
多孔菌科 Polyporaceae 8 14 6.70 蜡蘑属 Laccaria 5 2.39
红菇科 Russulaceae 3 23 11.00 小皮伞属 Marasmius 6 2.87
小菇属 Mycena 11 5.26
光柄菇属 Pluteus 5 2.39
红菇属 Russula 17 8.13
栓菌属 Trametes 5 2.39
关闭全屏
  • BibTeX
  • EndNote
  • RefWorks
  • TxT