收藏切换
Flowability and Rheological Properties of Ultra-High Performance Concrete
收藏切换
Shengjie WANG1, Bing LI2, Chuanxi LI1, Yingchun SUN2, Tengyu YANG3
Journal of the Chinese Ceramic Society | 2023, 51(8) : 1962 - 1970
Less
收藏切换
Journal of the Chinese Ceramic Society | 2023, 51(8): 1962-1970
• Research Articles •
Flowability and Rheological Properties of Ultra-High Performance Concrete
Full
Shengjie WANG1, Bing LI2, Chuanxi LI1, Yingchun SUN2, Tengyu YANG3
Affiliations
  • 1.College of Civil Engineering, Changsha University of Science & Technology, Changsha 410114, China
  • 2.Foshan Jianying Development Co., Ltd, Foshan 528300, Guangdong, China
  • 3.Foshan Transportation Technology Co., Ltd, Foshan 528000, Guangdong, China
  • WANG Shengjie (1998-), male, Master candidate. E-mail:

About Author:

WANG Shengjie (1998-), male, Master candidate. E-mail:

Published: 2023-04-28 doi: 10.14062/j.issn.0454-5648.20230027
Outline
收藏切换

The conventional extension degree cannot fully reflect the construction performance of ultra-high performance concrete (UHPC), and it should be supplemented by the rheological properties. However, the proprietary equipment for the measurement of rheological properties is expensive, which is inconvenient to be directly used on the construction site. Therefore, 18 kinds of mix proportions of UHPC were prepared via changing the water-to-binder ratio and superplasticizer dosage. In this work, the flow and rheological parameters of various mix proportions of UHPC were obtained via testing the extension degree, characteristic time of extension degree (i.e., the time required for extension diameter of 0.7 and 0.8 times), rheological behavior, and mechanical properties after curing of the corresponding mix proportions. Finally, a relationship between fluidity and rheology of fresh UHPC (without steel fibers), which the mechanical properties belong to UHPC (with steel fibers), was established. The results show that the Bingham model can be used to describe the rheological behavior of fresh UHPC. The proposed characteristic time of extension degree index has a relatively high test accuracy. The rheological parameters of fresh UHPC can be obtained from the flowability-rheology relationship established. It is indicated that the calculated data by the proposed method agree well with the experimental results.

ultra-high performance concrete  /  water-binder ratio  /  superplasticizer dosage  /  flowability  /  rheology
王圣杰, 李兵, 李传习, 孙迎春, 杨腾宇. 超高性能混凝土流动性与流变性关系. 硅酸盐学报, 2023 , 51 (8) : 1962 -1970 . DOI: 10.14062/j.issn.0454-5648.20230027
Shengjie WANG, Bing LI, Chuanxi LI, Yingchun SUN, Tengyu YANG. Flowability and Rheological Properties of Ultra-High Performance Concrete[J]. Journal of the Chinese Ceramic Society, 2023 , 51 (8) : 1962 -1970 . DOI: 10.14062/j.issn.0454-5648.20230027
Year 2023 volume 51 Issue 8
38
4
Cite this Article
BibTeX
Article Info
doi: 10.14062/j.issn.0454-5648.20230027
  • Receive Date:2023-01-16
  • Online Date:2026-10-19
  • Published:2023-04-28
Article Data
Affiliations
History
  • Received:2023-01-16
  • Revised:2023-01-28
Funding
Affiliations
    1.College of Civil Engineering, Changsha University of Science & Technology, Changsha 410114, China
    2.Foshan Jianying Development Co., Ltd, Foshan 528300, Guangdong, China
    3.Foshan Transportation Technology Co., Ltd, Foshan 528000, Guangdong, China

Corresponding:

LI Chuanxi (1963-), male, Ph. D., Professor. E-mail:
References
Share
https://castjournals.cast.org.cn/joweb/gsyxb/EN/10.14062/j.issn.0454-5648.20230027
Share to
QR

Scan QR to access full text

Cite this article
BibTeX
Citations
表12种不同金属材料的力学参数
科
Family
属数
Number of
genus
种数
Number of
species
占总种数比例
Percentage of
total species (%)
属
Genus
种数
Number of
species
占总种数比例
Percentage of total
species (%)
鹅膏菌科Amanitaceae 2 11 5.26 鹅膏菌属 Amanita 10 4.78
小菇科 Mycenaceae 2 12 5.74 丝盖伞属 Inocybe 5 2.39
多孔菌科 Polyporaceae 8 14 6.70 蜡蘑属 Laccaria 5 2.39
红菇科 Russulaceae 3 23 11.00 小皮伞属 Marasmius 6 2.87
小菇属 Mycena 11 5.26
光柄菇属 Pluteus 5 2.39
红菇属 Russula 17 8.13
栓菌属 Trametes 5 2.39
关闭全屏
  • BibTeX
  • EndNote
  • RefWorks
  • TxT