收藏切换
Design of Chemical Additives with Polyphenyl Sulfonate Derivatives for Surface Texturing on Monocrystalline Silicon
收藏切换
Haiying TIAN1, Yuan CAI1, Ruiqi JIA1, Jie WANG1, Pingping FENG2, Pengwei ZHANG2, Guodong FAN1, Zheng YIN1
Journal of the Chinese Ceramic Society | 2023, 51(7) : 1827 - 1834
Less
收藏切换
Journal of the Chinese Ceramic Society | 2023, 51(7): 1827-1834
• Research Articles •
Design of Chemical Additives with Polyphenyl Sulfonate Derivatives for Surface Texturing on Monocrystalline Silicon
Full
Haiying TIAN1, Yuan CAI1, Ruiqi JIA1, Jie WANG1, Pingping FENG2, Pengwei ZHANG2, Guodong FAN1, Zheng YIN1
Affiliations
  • 1.Key Laboratory of Auxiliary Chemistry & Technology for Chemical Industry (Ministry of Education), Shaanxi Collaborative Innovation Center of Industrial Auxiliary Chemistry and Technology, Shaanxi University of Science and Technology, Xi'an 710021, China
  • 2.Xi'an Lanqiao New Energy Technology Company Limited, Xi'an 710020, China
  • TIAN Haiying (1997-), female, Master candidate. E-mail:

About Author:

TIAN Haiying (1997-), female, Master candidate. E-mail:

Published: 2023-05-29 doi: 10.14062/j.issn.0454-5648.20221111
Outline
收藏切换

High-efficiency, green, stable and economical texturing molecules and the relative additive composition are considered as one of the key tasks to obtain a light trapping structure with an ultra-low reflectivity and to improve the photoelectric conversion efficiency of monocrystalline silicon solar cell. In this work, polyphenyl skeleton was used to strength the interfacial interaction between silicon crystalline face and texturing molecules, while sulfonic, hydroxy and alkoxy groups regulate the texturing sites. Sodium 6-naphthalene disulfonate, sodium 2-hydroxy-7-naphthalene sulfonate, sodium dodecyl diphenyl ether sulfonate and sodium lignosulfonate were selected to investigate their texturing effects. The results show that larger molecular size, dispersed polyphenyl skeleton, flexible molecular structure, abundant hydroxyl and alkoxy groups for polyphenyl sulfonate derivatives facilitate the generation of a continuous, uniform and dense pyramid structure on monocrystalline silicon surface. Based on the comparative experimental results at different reaction parameters (i.e., texturing molecule structure, concentration, reaction time and temperature), sodium lignosulfonate was selected as an effective texturing reagent. In a low mass fraction range of 0.000 6%-0.06%, the single use of sodium lignosulfonate can lead to a low reflectivity of 15.84%-26.94%. A low-concentration and high-stability additive composition with 0.015% (in mass fraction, the same below) sodium lignosulfonate, 1.1% sodium dodecylbenzene sulfonate and 2.0% 2-hydroxy-β-cyclodextrin can be obtained via systematic orthogonal experiments in the presence of a surfactant and an antifoaming agent. A desired texturing surface featured with a uniform, dense pyramid structure sized at 1.7-1.9 μm and an average reflectivity of 9.89% occurs at 75-85 ℃ for 200-400 s when adding this additive into 0.65% NaOH aqueous solution as a corrosive agent. This work can provide a reference for the development of green, efficient and practical additives for texturing on monocrystalline silicon based on polyphenyl sulfonate derivatives as a texturing agent.

monocrystalline silicon  /  solar cell  /  surface texturing  /  reflectivity
田海莹, 蔡媛, 贾蕊琪, 王婕, 冯萍萍, 张鹏伟, 樊国栋, 殷政. 基于芳香环磺酸盐的制绒添加剂设计及其单晶硅表面织构化. 硅酸盐学报, 2023 , 51 (7) : 1827 -1834 . DOI: 10.14062/j.issn.0454-5648.20221111
Haiying TIAN, Yuan CAI, Ruiqi JIA, Jie WANG, Pingping FENG, Pengwei ZHANG, Guodong FAN, Zheng YIN. Design of Chemical Additives with Polyphenyl Sulfonate Derivatives for Surface Texturing on Monocrystalline Silicon[J]. Journal of the Chinese Ceramic Society, 2023 , 51 (7) : 1827 -1834 . DOI: 10.14062/j.issn.0454-5648.20221111
Year 2023 volume 51 Issue 7
39
5
Cite this Article
BibTeX
Article Info
doi: 10.14062/j.issn.0454-5648.20221111
  • Receive Date:2022-12-31
  • Online Date:2026-10-19
  • Published:2023-05-29
Article Data
Affiliations
History
  • Received:2022-12-31
  • Revised:2023-02-10
Funding
Affiliations
    1.Key Laboratory of Auxiliary Chemistry & Technology for Chemical Industry (Ministry of Education), Shaanxi Collaborative Innovation Center of Industrial Auxiliary Chemistry and Technology, Shaanxi University of Science and Technology, Xi'an 710021, China
    2.Xi'an Lanqiao New Energy Technology Company Limited, Xi'an 710020, China

Corresponding:

YIN Zheng (1988-), male, Ph.D., Associate Professor. E-mail:
References
Share
https://castjournals.cast.org.cn/joweb/gsyxb/EN/10.14062/j.issn.0454-5648.20221111
Share to
QR

Scan QR to access full text

Cite this article
BibTeX
Citations
表12种不同金属材料的力学参数
科
Family
属数
Number of
genus
种数
Number of
species
占总种数比例
Percentage of
total species (%)
属
Genus
种数
Number of
species
占总种数比例
Percentage of total
species (%)
鹅膏菌科Amanitaceae 2 11 5.26 鹅膏菌属 Amanita 10 4.78
小菇科 Mycenaceae 2 12 5.74 丝盖伞属 Inocybe 5 2.39
多孔菌科 Polyporaceae 8 14 6.70 蜡蘑属 Laccaria 5 2.39
红菇科 Russulaceae 3 23 11.00 小皮伞属 Marasmius 6 2.87
小菇属 Mycena 11 5.26
光柄菇属 Pluteus 5 2.39
红菇属 Russula 17 8.13
栓菌属 Trametes 5 2.39
关闭全屏
  • BibTeX
  • EndNote
  • RefWorks
  • TxT