收藏切换
Effect of Microwave Sintering Process on Mechanical Properties of Sialon Ceramic Tool Materials
收藏切换
Peng CHEN, Bin ZOU, Kai XUE
Journal of the Chinese Ceramic Society | 2022, 50(12) : 3236 - 3242
Less
收藏切换
Journal of the Chinese Ceramic Society | 2022, 50(12): 3236-3242
• Research Articles •
Effect of Microwave Sintering Process on Mechanical Properties of Sialon Ceramic Tool Materials
Full
Peng CHEN, Bin ZOU, Kai XUE
Affiliations
  • School of Mechanical Engineering, Shandong University, Key Laboratory of High Efficiency and Clean Machinery Manufacturing, Ministry of Education, National Experimental Teaching Demonstration Center of Mechanical Engineering, Jinan 250061
  • CHEN Peng (1995-), male, Master candidate. E-mail:

About Author:

CHEN Peng (1995-), male, Master candidate. E-mail:

Published: 2022-12-20 doi: 10.14062/j.issn.0454-5648.20220466
Outline
收藏切换

Sialon ceramic tool materials were prepared by a microwave sintering technology. The influences of sintering temperature and holding time on the mechanical properties of Sialon ceramic tool materials were investigated, and the microstructure was analyzed. The results show that the tool material obtained at the sintering temperature of 1 600 ℃ and the holding time of 15 min has the optimum mechanical properties (i.e., density of 98.9%, hardness of 17.8 GPa and fracture toughness of 5.9 MPa·m1/2, respectively). In this sintering process, the material has a uniform microstructure with little internal pores, which is conducive to the improvement of its mechanical properties. The ceramic tool material with the superior mechanical properties can be obtained for a short time of heat preservation as the microwave sintering technology is used, thus improving the production efficiency.

microwave sintering  /  temperature  /  holding time  /  mechanical properties  /  Sialon ceramic tool materials
陈朋, 邹斌, 薛锴. 微波烧结工艺对Sialon陶瓷刀具材料力学性能的影响. 硅酸盐学报, 2022 , 50 (12) : 3236 -3242 . DOI: 10.14062/j.issn.0454-5648.20220466
Peng CHEN, Bin ZOU, Kai XUE. Effect of Microwave Sintering Process on Mechanical Properties of Sialon Ceramic Tool Materials[J]. Journal of the Chinese Ceramic Society, 2022 , 50 (12) : 3236 -3242 . DOI: 10.14062/j.issn.0454-5648.20220466
Year 2022 volume 50 Issue 12
33
9
Cite this Article
BibTeX
Article Info
doi: 10.14062/j.issn.0454-5648.20220466
  • Receive Date:2022-06-10
  • Online Date:2026-10-20
  • Published:2022-12-20
Article Data
Affiliations
History
  • Received:2022-06-10
  • Revised:2022-07-08
Funding
Affiliations
    School of Mechanical Engineering, Shandong University, Key Laboratory of High Efficiency and Clean Machinery Manufacturing, Ministry of Education, National Experimental Teaching Demonstration Center of Mechanical Engineering, Jinan 250061

Corresponding:

ZOU Bin (1978-), male, Ph.D., Professor. E-mail:
References
Share
https://castjournals.cast.org.cn/joweb/gsyxb/EN/10.14062/j.issn.0454-5648.20220466
Share to
QR

Scan QR to access full text

Cite this article
BibTeX
Citations
表12种不同金属材料的力学参数
科
Family
属数
Number of
genus
种数
Number of
species
占总种数比例
Percentage of
total species (%)
属
Genus
种数
Number of
species
占总种数比例
Percentage of total
species (%)
鹅膏菌科Amanitaceae 2 11 5.26 鹅膏菌属 Amanita 10 4.78
小菇科 Mycenaceae 2 12 5.74 丝盖伞属 Inocybe 5 2.39
多孔菌科 Polyporaceae 8 14 6.70 蜡蘑属 Laccaria 5 2.39
红菇科 Russulaceae 3 23 11.00 小皮伞属 Marasmius 6 2.87
小菇属 Mycena 11 5.26
光柄菇属 Pluteus 5 2.39
红菇属 Russula 17 8.13
栓菌属 Trametes 5 2.39
关闭全屏
  • BibTeX
  • EndNote
  • RefWorks
  • TxT