收藏切换
Research Progress on Joining of SiC Ceramics and Its Composites Using SiC as Major Phase of Joining Layer
收藏切换
Weiming GUO1, Shengjin HE1, Chuangtian ZHAN1, Jiaxiang XUE2, Linlin ZHU1, Lixiang WU2, Haibin MA2, Jianhan ZHAI2, Yuanbin CHEN1, Huatai LIN1
Journal of the Chinese Ceramic Society | 2022, 50(9) : 2527 - 2537
Less
收藏切换
Journal of the Chinese Ceramic Society | 2022, 50(9): 2527-2537
• Review •
Research Progress on Joining of SiC Ceramics and Its Composites Using SiC as Major Phase of Joining Layer
Full
Weiming GUO1, Shengjin HE1, Chuangtian ZHAN1, Jiaxiang XUE2, Linlin ZHU1, Lixiang WU2, Haibin MA2, Jianhan ZHAI2, Yuanbin CHEN1, Huatai LIN1
Affiliations
  • 1.School of Electromechanical Engineering, Guangdong University of Technology, Guangzhou 510006, China
  • 2.China Nuclear Power Technology Research Institute, Shenzhen 518026, Guangdong, China
  • GUO Weiming (1982-), male, Ph.D., Professor. E-mail:

About Author:

GUO Weiming (1982-), male, Ph.D., Professor. E-mail:

Published: 2022-09-20 doi: 10.14062/j.issn.0454-5648.20220155
Outline
收藏切换

SiC ceramics are difficult to be directly processed into large and complex components due to their high brittleness, high hardness and high wear resistance. Therefore, joining technology is one of the developed methods to facilitate the engineering application of SiC ceramics. Among various joining methods, the joints obtained by the joining method using SiC as a major phase of the joining layer have some advantages like high joint strength, low joint stress, radiation resistance, chemical corrosion resistance and high temperature resistance, thus becoming the key technologies for SiC ceramic joining, i.e., nano-infiltrated transient eutectoid phase joining (i.e., NITE phase joining), silicon-carbon reaction joining (i.e., Si—C reaction joining) and precursor joining. This review represented three kinds of SiC ceramic joining technologies above using SiC as a major phase of the joining layer from the aspects of joining mechanism, joining process, joint composition, microstructure and joining strength. The advantages and deficiencies of the three kinds of joining technologies were analyzed and compared. In addition, the future development was also prospected.

joining of silicon carbide ceramics  /  nano-infiltrated transient eutectoid phase joining  /  silicon-carbon reaction joining  /  precursor joining
郭伟明, 何盛金, 詹创添, 薛佳祥, 朱林林, 吴利翔, 马海滨, 翟剑晗, 陈原彬, 林华泰. 以SiC为连接层主相的SiC陶瓷及其复合材料连接研究进展. 硅酸盐学报, 2022 , 50 (9) : 2527 -2537 . DOI: 10.14062/j.issn.0454-5648.20220155
Weiming GUO, Shengjin HE, Chuangtian ZHAN, Jiaxiang XUE, Linlin ZHU, Lixiang WU, Haibin MA, Jianhan ZHAI, Yuanbin CHEN, Huatai LIN. Research Progress on Joining of SiC Ceramics and Its Composites Using SiC as Major Phase of Joining Layer[J]. Journal of the Chinese Ceramic Society, 2022 , 50 (9) : 2527 -2537 . DOI: 10.14062/j.issn.0454-5648.20220155
Year 2022 volume 50 Issue 9
35
7
Cite this Article
BibTeX
Article Info
doi: 10.14062/j.issn.0454-5648.20220155
  • Receive Date:2022-03-02
  • Online Date:2026-10-20
  • Published:2022-09-20
Article Data
Affiliations
History
  • Received:2022-03-02
  • Revised:2022-04-11
Funding
Affiliations
    1.School of Electromechanical Engineering, Guangdong University of Technology, Guangzhou 510006, China
    2.China Nuclear Power Technology Research Institute, Shenzhen 518026, Guangdong, China
References
Share
https://castjournals.cast.org.cn/joweb/gsyxb/EN/10.14062/j.issn.0454-5648.20220155
Share to
QR

Scan QR to access full text

Cite this article
BibTeX
Citations
表12种不同金属材料的力学参数
科
Family
属数
Number of
genus
种数
Number of
species
占总种数比例
Percentage of
total species (%)
属
Genus
种数
Number of
species
占总种数比例
Percentage of total
species (%)
鹅膏菌科Amanitaceae 2 11 5.26 鹅膏菌属 Amanita 10 4.78
小菇科 Mycenaceae 2 12 5.74 丝盖伞属 Inocybe 5 2.39
多孔菌科 Polyporaceae 8 14 6.70 蜡蘑属 Laccaria 5 2.39
红菇科 Russulaceae 3 23 11.00 小皮伞属 Marasmius 6 2.87
小菇属 Mycena 11 5.26
光柄菇属 Pluteus 5 2.39
红菇属 Russula 17 8.13
栓菌属 Trametes 5 2.39
关闭全屏
  • BibTeX
  • EndNote
  • RefWorks
  • TxT