收藏切换
Effects of Sintering Temperature on Properties of Porous PZT Ceramics
收藏切换
Wei LIU1, Haoxin SUN1, Jianhong WANG1, Yingge DONG1, Peikang BAI1, Xiaoqin XI2, Jinlong YANG1, 2
Journal of the Chinese Ceramic Society | 2022, 50(3) : 691 - 697
Less
收藏切换
Journal of the Chinese Ceramic Society | 2022, 50(3): 691-697
• Research Articles •
Effects of Sintering Temperature on Properties of Porous PZT Ceramics
Full
Wei LIU1, Haoxin SUN1, Jianhong WANG1, Yingge DONG1, Peikang BAI1, Xiaoqin XI2, Jinlong YANG1, 2
Affiliations
  • 1.School of Materials Science and Engineering, North University of China, Taiyuan 030051
  • 2.State Key Laboratory of New Ceramics and Fine Processing, Department of Materials Science and Engineering, Tsinghua University, Beijing 100084, China
  • LIU Wei (1980-), male, Ph. D., Associate Professor. E-mail:

About Author:

LIU Wei (1980-), male, Ph. D., Associate Professor. E-mail:

Published: 2022-03-20 doi: 10.14062/j.issn.0454-5648.20210885
Outline
收藏切换

3-1 type and 3-3 type porous PZT ceramics were fabricated by the alginate ionotropic gelation process and gelcasting technology respectively. The resultant samples were sintered at different temperatures and characterized in terms of both microstructure and piezoelectric properties. It was noted that the porosity and grain size of porous PZT ceramics increased with the sintering temperature increasing from 1 150 to 1 250 ℃, which resulted in the increase of relative permittivity, piezoelectric efficient, thickness coupling coefficient kt and compressive strength, the corresponding decrease of hydrostatic voltage coefficient and hydrostatic figure of merit (HFOM). Under the joint effects of unidirectionally aligned channels and the incorporation of Ca2+ into PZT matrix, the 3-1 type PZT ceramics possessed higher εr and compressive strength, lower d33 and HFOM than that of 3-3 type PZT ceramics. However, the maximum HFOM value of 3-1 type PZT ceramics achieved 4 755×10-15 Pa-1, which makes it suitable for the application of underwater sonar detectors.

porous piezoelectric ceramics  /  sintering temperature  /  microscopic morphology  /  dielectric property  /  mechanical property
刘炜, 孙浩鑫, 王建宏, 董英鸽, 白培康, 席小庆, 杨金龙. 烧结温度对多孔陶瓷压电性能的影响. 硅酸盐学报, 2022 , 50 (3) : 691 -697 . DOI: 10.14062/j.issn.0454-5648.20210885
Wei LIU, Haoxin SUN, Jianhong WANG, Yingge DONG, Peikang BAI, Xiaoqin XI, Jinlong YANG. Effects of Sintering Temperature on Properties of Porous PZT Ceramics[J]. Journal of the Chinese Ceramic Society, 2022 , 50 (3) : 691 -697 . DOI: 10.14062/j.issn.0454-5648.20210885
Year 2022 volume 50 Issue 3
21
4
Cite this Article
BibTeX
Article Info
doi: 10.14062/j.issn.0454-5648.20210885
  • Receive Date:2021-10-15
  • Online Date:2026-10-22
  • Published:2022-03-20
Article Data
Affiliations
History
  • Received:2021-10-15
  • Revised:2021-11-11
Funding
Affiliations
    1.School of Materials Science and Engineering, North University of China, Taiyuan 030051
    2.State Key Laboratory of New Ceramics and Fine Processing, Department of Materials Science and Engineering, Tsinghua University, Beijing 100084, China

Corresponding:

YANG Jinlong (1966-), male, Ph.D., Professor. E-mail:
References
Share
https://castjournals.cast.org.cn/joweb/gsyxb/EN/10.14062/j.issn.0454-5648.20210885
Share to
QR

Scan QR to access full text

Cite this article
BibTeX
Citations
表12种不同金属材料的力学参数
科
Family
属数
Number of
genus
种数
Number of
species
占总种数比例
Percentage of
total species (%)
属
Genus
种数
Number of
species
占总种数比例
Percentage of total
species (%)
鹅膏菌科Amanitaceae 2 11 5.26 鹅膏菌属 Amanita 10 4.78
小菇科 Mycenaceae 2 12 5.74 丝盖伞属 Inocybe 5 2.39
多孔菌科 Polyporaceae 8 14 6.70 蜡蘑属 Laccaria 5 2.39
红菇科 Russulaceae 3 23 11.00 小皮伞属 Marasmius 6 2.87
小菇属 Mycena 11 5.26
光柄菇属 Pluteus 5 2.39
红菇属 Russula 17 8.13
栓菌属 Trametes 5 2.39
关闭全屏
  • BibTeX
  • EndNote
  • RefWorks
  • TxT