收藏切换
Ablation Resistance of C/SiC Composites Prepared by Hot-pressed Sintering Process
收藏切换
Hongxiang HUANG1, Feng WANG2, Zhiyong HE2, Xiaobo WANG2
Journal of the Chinese Ceramic Society | 2021, 49(12) : 2629 - 2635
Less
收藏切换
Journal of the Chinese Ceramic Society | 2021, 49(12): 2629-2635
• Research Article •
Ablation Resistance of C/SiC Composites Prepared by Hot-pressed Sintering Process
Full
Hongxiang HUANG1, Feng WANG2, Zhiyong HE2, Xiaobo WANG2
Affiliations
  • 1.Central Iron&Steel Research Institute, Beijing 100081, China
  • 2.China Iron & Steel Research Institute Group, Beijing 100081, China
  • HUANG Hongxiang (1996-), male, Master candidate. E-mail:

About Author:

HUANG Hongxiang (1996-), male, Master candidate. E-mail:

Published: 2021-12-20 doi: 10.14062/j.issn.0454-5648.20210667
Outline
收藏切换

C/SiC composites were prepared by the hot-pressed sintering process with SiC powder, carbon fiber and phenolic resin as raw materials. The effects of sintering pressure, sintering temperature and carbon fiber content on the ablation resistance of C/SiC composites were investigated via a designed orthogonal experiment. The phase composition, microstructure and ablation resistance of the samples were characterized by X-ray diffraction, scanning electron microscopy and oxygen-acetylene ablative method. The results show that the dominant factor affecting the ablation resistance of C/SiC composites is sintering temperature, while the minor factor is carbon fiber content. Increasing the sintering temperature and hot pressing pressure can be beneficial to the densification of the sample. However, the excessive sintering temperature and sintering pressure can promote the diffusion of Si element into carbon fiber that does not favor the ablative performance. In addition, the introduction of excessive carbon fiber is not conductive to the densification of the sample, thus leading to the ablation resistance reduction. With the sintering temperature of 2 050℃, the hot pressing pressure of 20 MPa and the volume fraction of carbon fiber of 25%, the obtained samples exhibit the superior ablation resistance with a mass ablation rate of 2.0 mg/s.

carbon/silicon carbide composites  /  sintering temperature  /  carbon fiber content  /  hot-pressing pressure  /  ablation resistance
黄竑翔, 王峰, 贺智勇, 王晓波. 热压烧结工艺制备C/SiC复合材料的抗烧蚀性能. 硅酸盐学报, 2021 , 49 (12) : 2629 -2635 . DOI: 10.14062/j.issn.0454-5648.20210667
Hongxiang HUANG, Feng WANG, Zhiyong HE, Xiaobo WANG. Ablation Resistance of C/SiC Composites Prepared by Hot-pressed Sintering Process[J]. Journal of the Chinese Ceramic Society, 2021 , 49 (12) : 2629 -2635 . DOI: 10.14062/j.issn.0454-5648.20210667
Year 2021 volume 49 Issue 12
29
11
Cite this Article
BibTeX
Article Info
doi: 10.14062/j.issn.0454-5648.20210667
  • Receive Date:2021-08-09
  • Online Date:2026-10-30
  • Published:2021-12-20
Article Data
Affiliations
History
  • Received:2021-08-09
  • Revised:2021-09-08
Affiliations
    1.Central Iron&Steel Research Institute, Beijing 100081, China
    2.China Iron & Steel Research Institute Group, Beijing 100081, China

Corresponding:

HE Zhiyong (1970-), male, Professorate Senior Engineer. E-mail:
References
Share
https://castjournals.cast.org.cn/joweb/gsyxb/EN/10.14062/j.issn.0454-5648.20210667
Share to
QR

Scan QR to access full text

Cite this article
BibTeX
Citations
表12种不同金属材料的力学参数
科
Family
属数
Number of
genus
种数
Number of
species
占总种数比例
Percentage of
total species (%)
属
Genus
种数
Number of
species
占总种数比例
Percentage of total
species (%)
鹅膏菌科Amanitaceae 2 11 5.26 鹅膏菌属 Amanita 10 4.78
小菇科 Mycenaceae 2 12 5.74 丝盖伞属 Inocybe 5 2.39
多孔菌科 Polyporaceae 8 14 6.70 蜡蘑属 Laccaria 5 2.39
红菇科 Russulaceae 3 23 11.00 小皮伞属 Marasmius 6 2.87
小菇属 Mycena 11 5.26
光柄菇属 Pluteus 5 2.39
红菇属 Russula 17 8.13
栓菌属 Trametes 5 2.39
关闭全屏
  • BibTeX
  • EndNote
  • RefWorks
  • TxT