收藏切换
Fracture Morphology of Tempered Glass and Voronoi Tessellation-Based Regeneration
收藏切换
Yuhan ZHU1, 2, Jian YANG1, 2, Xing-er WANG1, 2, Kai ZHANG1, 2, Yige WANG1, 2
Journal of the Chinese Ceramic Society | 2022, 50(2) : 482 - 491
Less
收藏切换
Journal of the Chinese Ceramic Society | 2022, 50(2): 482-491
• Research Articles •
Fracture Morphology of Tempered Glass and Voronoi Tessellation-Based Regeneration
Full
Yuhan ZHU1, 2, Jian YANG1, 2, Xing-er WANG1, 2, Kai ZHANG1, 2, Yige WANG1, 2
Affiliations
  • 1.State Key Laboratory of Ocean Engineering, Shanghai Jiao Tong University, Shanghai 200240, China
  • 2.Shanghai Key Laboratory for Digital Maintenance of Buildings and Infrastructure, School of Naval Architecture, Ocean and Civil Engineering, Shanghai Jiao Tong University, Shanghai 200240, China
  • ZHU Yuhan (1997-), male, Master candidate. E-mail:

About Author:

ZHU Yuhan (1997-), male, Master candidate. E-mail:

Published: 2022-02-20 doi: 10.14062/j.issn.0454-5648.20210559
Outline
收藏切换

The residual effect of fractured glass, which is greatly affected by its fracture morphology, is correlated to the post-fracture performance of laminated glass. For tempered glass in laminated glass, its fracture morphology is affected by some major variables such as surface compressive stress, thickness, and fracture point. However, a few previous work concerning the fracture morphology characterization are reported. In this paper, fragmentation tests were firstly conducted on 81 tempered glass specimens. The fracture morphology and spatial distribution, including fragment area, perimeter, circularity and distribution intensity, were analyzed. The fracture morphology and spatial distribution obtained at the given variables (i.e., surface compressive stress of 60-105 MPa, thickness of 6-12 mm, three fracture points) were discussed. Also, a new seeds generation approach for the centroid of fragments to control nearest neighbor distance and global distribution intensity of fragments was proposed, which was combined with the Voronoi tessellation to characterize the fracture morphology of tempered glass. The proposed method has a satisfactory accuracy in generating the fracture morphology.

fully tempered glass  /  heat strengthened glass  /  fracture morphology  /  Voronoi tessellation  /  surface compressive stress
朱禹翰, 杨健, 王星尔, 张凯, 王义戈. 物理钢化玻璃裂纹形态试验及Voronoi形态表征. 硅酸盐学报, 2022 , 50 (2) : 482 -491 . DOI: 10.14062/j.issn.0454-5648.20210559
Yuhan ZHU, Jian YANG, Xing-er WANG, Kai ZHANG, Yige WANG. Fracture Morphology of Tempered Glass and Voronoi Tessellation-Based Regeneration[J]. Journal of the Chinese Ceramic Society, 2022 , 50 (2) : 482 -491 . DOI: 10.14062/j.issn.0454-5648.20210559
Year 2022 volume 50 Issue 2
21
6
Cite this Article
BibTeX
Article Info
doi: 10.14062/j.issn.0454-5648.20210559
  • Receive Date:2021-07-09
  • Online Date:2026-10-22
  • Published:2022-02-20
Article Data
Affiliations
History
  • Received:2021-07-09
  • Revised:2021-07-20
Funding
Affiliations
    1.State Key Laboratory of Ocean Engineering, Shanghai Jiao Tong University, Shanghai 200240, China
    2.Shanghai Key Laboratory for Digital Maintenance of Buildings and Infrastructure, School of Naval Architecture, Ocean and Civil Engineering, Shanghai Jiao Tong University, Shanghai 200240, China

Corresponding:

WANG Xing-er (1989-), male, Ph.D., Assistant Researcher. E-mail:
References
Share
https://castjournals.cast.org.cn/joweb/gsyxb/EN/10.14062/j.issn.0454-5648.20210559
Share to
QR

Scan QR to access full text

Cite this article
BibTeX
Citations
表12种不同金属材料的力学参数
科
Family
属数
Number of
genus
种数
Number of
species
占总种数比例
Percentage of
total species (%)
属
Genus
种数
Number of
species
占总种数比例
Percentage of total
species (%)
鹅膏菌科Amanitaceae 2 11 5.26 鹅膏菌属 Amanita 10 4.78
小菇科 Mycenaceae 2 12 5.74 丝盖伞属 Inocybe 5 2.39
多孔菌科 Polyporaceae 8 14 6.70 蜡蘑属 Laccaria 5 2.39
红菇科 Russulaceae 3 23 11.00 小皮伞属 Marasmius 6 2.87
小菇属 Mycena 11 5.26
光柄菇属 Pluteus 5 2.39
红菇属 Russula 17 8.13
栓菌属 Trametes 5 2.39
关闭全屏
  • BibTeX
  • EndNote
  • RefWorks
  • TxT