收藏切换
Damage and Creep Behavior in Planar Solid Oxide Fuel Cell by Modeling of Multiphysics Coupled
收藏切换
Ming SONG1, Shuai MA1, Chuansheng DU2, Bingying WANG2, Wenchun JIANG3
Journal of the Chinese Ceramic Society | 2022, 50(1) : 212 - 218
Less
收藏切换
Journal of the Chinese Ceramic Society | 2022, 50(1): 212-218
• Research Articles •
Damage and Creep Behavior in Planar Solid Oxide Fuel Cell by Modeling of Multiphysics Coupled
Full
Ming SONG1, Shuai MA1, Chuansheng DU2, Bingying WANG2, Wenchun JIANG3
Affiliations
  • 1.College of Pipeline and Civil Engineering, China University of Petroleum (East China), Qingdao 266580, Shandong, China
  • 2.College of Materials Science and Engineering, China University of Petroleum (East China), Qingdao 266580, Shandong, China
  • 3.College of New Energy, China University of Petroleum (East China), Qingdao 266580, Shandong, China
  • SONG Ming(1984-), male, Ph.D., Lecturer. E-mail:

About Author:

SONG Ming(1984-), male, Ph.D., Lecturer. E-mail:

Published: 2022-01-20 doi: 10.14062/j.issn.0454-5648.20210344
Outline
收藏切换

A multiphysics-coupling model of solid oxide fuel cell (SOFC) was proposed via a software named COMSOL Multiphysics for the establishment of coupled fields of electrochemical-gas, flow-matter and transfer-temperature. The inhomogeneous temperature distribution obtained from the numerical analysis was applied to the corresponding model build by ABAQUS as a thermal load, and the creep damage subroutine developed based on the Wen-Tu creep ductile depletion model was used to analyze the creep damage of SOFC. The creep damage behavior of SOFC was investigated and the creep crack propagation was predicted. The results show that the creep deformation and damage of SOFC components firstly increase and then remain unchanged. The lower connector is the first to reach the critical damage value, which is the potential dangerous area and is the most likely to failure. After 50 000 h, two creep damages occur in SOFC. The maximum crack is 1.6 mm as the non-penetrating crack that occurs at the junction of 1.1 mm in the air inlet of the lower connector and the cathode material. Compared with the overall structure size, the smaller crack will not cause gas leakage, thus meeting the requirement of commercial safe operation for 40 000 h.

solid oxide fuel cell  /  uniform temperature field  /  creep and damage  /  crack propagation
宋明, 马帅, 杜传胜, 王炳英, 蒋文春. 多物理场耦合作用下平板式固体氧化物燃料电池的蠕变损伤行为. 硅酸盐学报, 2022 , 50 (1) : 212 -218 . DOI: 10.14062/j.issn.0454-5648.20210344
Ming SONG, Shuai MA, Chuansheng DU, Bingying WANG, Wenchun JIANG. Damage and Creep Behavior in Planar Solid Oxide Fuel Cell by Modeling of Multiphysics Coupled[J]. Journal of the Chinese Ceramic Society, 2022 , 50 (1) : 212 -218 . DOI: 10.14062/j.issn.0454-5648.20210344
Year 2022 volume 50 Issue 1
17
4
Cite this Article
BibTeX
Article Info
doi: 10.14062/j.issn.0454-5648.20210344
  • Receive Date:2021-04-30
  • Online Date:2026-10-22
  • Published:2022-01-20
Article Data
Affiliations
History
  • Received:2021-04-30
  • Revised:2021-07-30
Funding
Affiliations
    1.College of Pipeline and Civil Engineering, China University of Petroleum (East China), Qingdao 266580, Shandong, China
    2.College of Materials Science and Engineering, China University of Petroleum (East China), Qingdao 266580, Shandong, China
    3.College of New Energy, China University of Petroleum (East China), Qingdao 266580, Shandong, China
References
Share
https://castjournals.cast.org.cn/joweb/gsyxb/EN/10.14062/j.issn.0454-5648.20210344
Share to
QR

Scan QR to access full text

Cite this article
BibTeX
Citations
表12种不同金属材料的力学参数
科
Family
属数
Number of
genus
种数
Number of
species
占总种数比例
Percentage of
total species (%)
属
Genus
种数
Number of
species
占总种数比例
Percentage of total
species (%)
鹅膏菌科Amanitaceae 2 11 5.26 鹅膏菌属 Amanita 10 4.78
小菇科 Mycenaceae 2 12 5.74 丝盖伞属 Inocybe 5 2.39
多孔菌科 Polyporaceae 8 14 6.70 蜡蘑属 Laccaria 5 2.39
红菇科 Russulaceae 3 23 11.00 小皮伞属 Marasmius 6 2.87
小菇属 Mycena 11 5.26
光柄菇属 Pluteus 5 2.39
红菇属 Russula 17 8.13
栓菌属 Trametes 5 2.39
关闭全屏
  • BibTeX
  • EndNote
  • RefWorks
  • TxT