收藏切换
Mechanical Properties and Cracking Characteristics of UHPC with Hybrid Steel Fibers at Early Age under Different Curing Conditions
收藏切换
Lili KAN1, Fei WANG1, Haijiang WU1, Xinzhi DUAN2, 3
Journal of the Chinese Ceramic Society | 2022, 50(2) : 429 - 437
Less
收藏切换
Journal of the Chinese Ceramic Society | 2022, 50(2): 429-437
• Research Articles •
Mechanical Properties and Cracking Characteristics of UHPC with Hybrid Steel Fibers at Early Age under Different Curing Conditions
Full
Lili KAN1, Fei WANG1, Haijiang WU1, Xinzhi DUAN2, 3
Affiliations
  • 1.School of Environment and Architecture, University of Shanghai for Science and Technology, Shanghai 200093, China
  • 2.Shanghai Municipal Planning & Design Institute Co. Ltd., Shanghai 200031, China
  • 3.Shanghai Engineering Research Center of Urban Road Ecological Technology, Shanghai 201418, China
  • KAN Lili(1980-), female, Associate Professor. E-mail:

About Author:

KAN Lili(1980-), female, Associate Professor. E-mail:

Published: 2022-02-20 doi: 10.14062/j.issn.0454-5648.20210342
Outline
收藏切换

The hydration degree and mechanical properties of ultra-high performance concrete (UHPC) specimens with hybrid steel fibers cured in air and hot water (1 d, 60℃ hot water + 2 d air), respectively, were investigated via ignition loss tests and uniaxial tensile and compressive tests. Also, the surface cracking characteristics of tensile specimens were characterized by digital image correlation technique and optical microscopy, and the microstructures were analyzed by scanning electron microscopy. The results show that compared with the results obtained in air curing, hot water curing accelerates the hydration reaction progress of the UHPC matrix, and an increase in temperature mainly contributes to the promotion of hydration reaction, thus improving the initial cracking, tensile and compressive strength of the UHPC specimens in hot water curing. However, the tensile strain capacity changes slightly. In general, the maximum crack width of the specimen decreases, the matrix becomes denser, and the interface bonding between the fibers and the matrix is stronger. The tensile strain of UHPC increases with the increase of fiber content, in which the tensile strains of the specimens with 2.5% (volume fraction) of fibers (a ratio of long fibers to short fibers is 1.25∶1.25 and 1.5∶1.0, respectively) are more than 2 ×10-3, the specimen with 1.5% long fibers and 1.0% short fibers produces more tensile cracks with the width of < 50 μm in hot water curing. The uniaxial tensile strains predicted by DIC are in reasonable agreement with the strains measured.

ultra-high performance concrete  /  hybrid steel fibers  /  curing conditions  /  early age  /  mechanical properties  /  cracking characteristics
阚黎黎, 王飞, 邬海江, 段昕智. 不同养护条件下混杂钢纤维超高性能混凝土的早龄期力学性能及开裂特性. 硅酸盐学报, 2022 , 50 (2) : 429 -437 . DOI: 10.14062/j.issn.0454-5648.20210342
Lili KAN, Fei WANG, Haijiang WU, Xinzhi DUAN. Mechanical Properties and Cracking Characteristics of UHPC with Hybrid Steel Fibers at Early Age under Different Curing Conditions[J]. Journal of the Chinese Ceramic Society, 2022 , 50 (2) : 429 -437 . DOI: 10.14062/j.issn.0454-5648.20210342
Year 2022 volume 50 Issue 2
16
3
Cite this Article
BibTeX
Article Info
doi: 10.14062/j.issn.0454-5648.20210342
  • Receive Date:2021-04-28
  • Online Date:2026-10-22
  • Published:2022-02-20
Article Data
Affiliations
History
  • Received:2021-04-28
  • Revised:2021-07-08
Funding
Affiliations
    1.School of Environment and Architecture, University of Shanghai for Science and Technology, Shanghai 200093, China
    2.Shanghai Municipal Planning & Design Institute Co. Ltd., Shanghai 200031, China
    3.Shanghai Engineering Research Center of Urban Road Ecological Technology, Shanghai 201418, China
References
Share
https://castjournals.cast.org.cn/joweb/gsyxb/EN/10.14062/j.issn.0454-5648.20210342
Share to
QR

Scan QR to access full text

Cite this article
BibTeX
Citations
表12种不同金属材料的力学参数
科
Family
属数
Number of
genus
种数
Number of
species
占总种数比例
Percentage of
total species (%)
属
Genus
种数
Number of
species
占总种数比例
Percentage of total
species (%)
鹅膏菌科Amanitaceae 2 11 5.26 鹅膏菌属 Amanita 10 4.78
小菇科 Mycenaceae 2 12 5.74 丝盖伞属 Inocybe 5 2.39
多孔菌科 Polyporaceae 8 14 6.70 蜡蘑属 Laccaria 5 2.39
红菇科 Russulaceae 3 23 11.00 小皮伞属 Marasmius 6 2.87
小菇属 Mycena 11 5.26
光柄菇属 Pluteus 5 2.39
红菇属 Russula 17 8.13
栓菌属 Trametes 5 2.39
关闭全屏
  • BibTeX
  • EndNote
  • RefWorks
  • TxT