收藏切换
Mechanical Properties and Fracture Mode of Anode Supported Solid Oxide Fuel Cell
收藏切换
Sai HU1, Xin JIN2, Ao WANG2, Jiaqi GENG1, Bo CHI1, Jian PU1
Journal of the Chinese Ceramic Society | 2021, 49(10) : 2180 - 2188
Less
收藏切换
Journal of the Chinese Ceramic Society | 2021, 49(10): 2180-2188
Mechanical Properties and Fracture Mode of Anode Supported Solid Oxide Fuel Cell
Full
Sai HU1, Xin JIN2, Ao WANG2, Jiaqi GENG1, Bo CHI1, Jian PU1
Affiliations
  • 1.School of Materials Science and Engineering, State Key Laboratory of Material Processing and Die & Mould Technology, Huazhong University of Science and Technology, Wuhan 430074, China
  • 2.Wuhan Institute of Marine Electric propulsion, Wuhan 430064, China
  • HU Sai (1995-),male, Postgraduate Student. E-mail:

About Author:

HU Sai (1995-),male, Postgraduate Student. E-mail:

Published: 2021-10-20 doi: 10.14062/j.issn.0454-5648.20210068
Outline
收藏切换

The relationship between the Weibull modulus of bending strength and its thickness of single cell before and after reduction was investigated by a coaxial ring force method. The Weibull modulus of NiO-YSZ anode supported cell is 4.56, 4.78 and 6.16 for the thickness of 1.1 mm, 0.9 mm and 0.7 mm, respectively. The Weibull modulus increases gradually with the decrease of sample thickness due to the reduced internal defect number of anode. The Weibull modulus of Ni-YSZ anode supported cell increases to 8.66, 12.49 and 9.37, respectively, since a plastic Ni phase inhibits the crack propagation. The single cell with a thickness of 0.9 mm shows a greater performance with the corresponding bending strength of 122.9 MPa. The crack sources of the sample mainly come from the internal defects of the anode and the agglomeration of Ni particles. Based on the experimental results, the influence of single cell thickness on its mechanical properties can be demonstrated at different crack source types and fracture modes.

solid oxide fuel cell  /  Weibull modulus  /  bending strength  /  fracture mode  /  crack source
胡赛, 金鑫, 王傲, 耿佳琦, 池波, 蒲健. 固体氧化物燃料电池力学性能变化规律和断裂模式研究. 硅酸盐学报, 2021 , 49 (10) : 2180 -2188 . DOI: 10.14062/j.issn.0454-5648.20210068
Sai HU, Xin JIN, Ao WANG, Jiaqi GENG, Bo CHI, Jian PU. Mechanical Properties and Fracture Mode of Anode Supported Solid Oxide Fuel Cell[J]. Journal of the Chinese Ceramic Society, 2021 , 49 (10) : 2180 -2188 . DOI: 10.14062/j.issn.0454-5648.20210068
Year 2021 volume 49 Issue 10
20
7
Cite this Article
BibTeX
Article Info
doi: 10.14062/j.issn.0454-5648.20210068
  • Receive Date:2021-01-21
  • Online Date:2026-10-30
  • Published:2021-10-20
Article Data
Affiliations
History
  • Received:2021-01-21
  • Revised:2021-02-22
Funding
Affiliations
    1.School of Materials Science and Engineering, State Key Laboratory of Material Processing and Die & Mould Technology, Huazhong University of Science and Technology, Wuhan 430074, China
    2.Wuhan Institute of Marine Electric propulsion, Wuhan 430064, China

Corresponding:

PU jian (1972-), male, Professor. E-mail:
References
Share
https://castjournals.cast.org.cn/joweb/gsyxb/EN/10.14062/j.issn.0454-5648.20210068
Share to
QR

Scan QR to access full text

Cite this article
BibTeX
Citations
表12种不同金属材料的力学参数
科
Family
属数
Number of
genus
种数
Number of
species
占总种数比例
Percentage of
total species (%)
属
Genus
种数
Number of
species
占总种数比例
Percentage of total
species (%)
鹅膏菌科Amanitaceae 2 11 5.26 鹅膏菌属 Amanita 10 4.78
小菇科 Mycenaceae 2 12 5.74 丝盖伞属 Inocybe 5 2.39
多孔菌科 Polyporaceae 8 14 6.70 蜡蘑属 Laccaria 5 2.39
红菇科 Russulaceae 3 23 11.00 小皮伞属 Marasmius 6 2.87
小菇属 Mycena 11 5.26
光柄菇属 Pluteus 5 2.39
红菇属 Russula 17 8.13
栓菌属 Trametes 5 2.39
关闭全屏
  • BibTeX
  • EndNote
  • RefWorks
  • TxT