收藏切换
In-situ Fluorinating Silica Nanoparticles for Superamphiphobic Coating Preparation
收藏切换
Xiaojian GUO1, Ying ZHANG1, 2, Xuan CHENG1, 2
Journal of the Chinese Ceramic Society | 2020, 48(1) : 128 - 134
Less
收藏切换
Journal of the Chinese Ceramic Society | 2020, 48(1): 128-134
In-situ Fluorinating Silica Nanoparticles for Superamphiphobic Coating Preparation
Full
Xiaojian GUO1, Ying ZHANG1, 2, Xuan CHENG1, 2
Affiliations
  • 1.Department of Materials Science and Engineering, College of Materials, Xiamen University
  • 2.Fujian Key Laboratory of Advanced Materials, Xiamen University, Xiamen 361005, Fujian, China
  • GUO Xiaojian (1993-), male, Master candidate. E-mail:

About Author:

GUO Xiaojian (1993-), male, Master candidate. E-mail:

Published: 2020-01-20 doi: 10.14062/j.issn.0454-5648.20190274
Outline
收藏切换

Perfluorodecyltrimethoxysilane (PFDMS) and tetraethyl orthosilicate (TEOS) were hydrolyzed in acid solutions and subsequent copolymerization with ammonia to perform in-situ fluorination of silica (SiO2) nanoparticles. A superamphiphobic coating with a good wear resistance was prepared via stacking the fluorinated SiO2 nanoparticles with a double-sided adhesive tape on a glass substrate. It is indicated that the effective introduction of C-F on SiO2 surface through in-situ fluorination could lower the surface energy. The contact angles of water, edible oil and hexadecane are 165°, 155° and 151°, respectively. After 50-cycle friction test with a sandpaper, the water contact angle still exceeds 155°. However, the oil contact angle drops to 132°. It is a simple and environmentally friendly preparation method.

superamphiphobic  /  copolymerization  /  in-situ fluorination  /  wear resistance  /  environmental protection
郭枭健, 张颖, 程璇. 原位氟化二氧化硅纳米颗粒制备超双疏涂层. 硅酸盐学报, 2020 , 48 (1) : 128 -134 . DOI: 10.14062/j.issn.0454-5648.20190274
Xiaojian GUO, Ying ZHANG, Xuan CHENG. In-situ Fluorinating Silica Nanoparticles for Superamphiphobic Coating Preparation[J]. Journal of the Chinese Ceramic Society, 2020 , 48 (1) : 128 -134 . DOI: 10.14062/j.issn.0454-5648.20190274
Year 2020 volume 48 Issue 1
28
6
Cite this Article
BibTeX
Article Info
doi: 10.14062/j.issn.0454-5648.20190274
  • Receive Date:2019-04-24
  • Online Date:2026-10-29
  • Published:2020-01-20
Article Data
Affiliations
History
  • Received:2019-04-24
  • Revised:2019-07-18
Funding
Affiliations
    1.Department of Materials Science and Engineering, College of Materials, Xiamen University
    2.Fujian Key Laboratory of Advanced Materials, Xiamen University, Xiamen 361005, Fujian, China

Corresponding:

CHENG Xuan (1963-), female, Ph.D., Professor. E-mail:
References
Share
https://castjournals.cast.org.cn/joweb/gsyxb/EN/10.14062/j.issn.0454-5648.20190274
Share to
QR

Scan QR to access full text

Cite this article
BibTeX
Citations
表12种不同金属材料的力学参数
科
Family
属数
Number of
genus
种数
Number of
species
占总种数比例
Percentage of
total species (%)
属
Genus
种数
Number of
species
占总种数比例
Percentage of total
species (%)
鹅膏菌科Amanitaceae 2 11 5.26 鹅膏菌属 Amanita 10 4.78
小菇科 Mycenaceae 2 12 5.74 丝盖伞属 Inocybe 5 2.39
多孔菌科 Polyporaceae 8 14 6.70 蜡蘑属 Laccaria 5 2.39
红菇科 Russulaceae 3 23 11.00 小皮伞属 Marasmius 6 2.87
小菇属 Mycena 11 5.26
光柄菇属 Pluteus 5 2.39
红菇属 Russula 17 8.13
栓菌属 Trametes 5 2.39
关闭全屏
  • BibTeX
  • EndNote
  • RefWorks
  • TxT