Home Latest Articles
Latest Articles
  • Ling TAN, Mingjian LIANG, Wei ZHANG, Yunxi DONG, Shao LIU, Fupeng LI, Xin TAN, Jianyu LONG, Sheng LI
    Journal of Geomechanics. 2026, 32(3): 638-655.
    Objective

    The Upper Yalong River basin, situated on the southeastern margin of the Bayan Har block, is characterized by a well-developed river system. Large-scale NW-trending active faults traverse this drainage basin, where tectonic activity constrains regional fluvial geomorphic development and evolution. Current research has predominantly focused on fault activity, paleoseismic events, and seismic hazard assessment, whereas studies addressing basin-scale geomorphic characteristics and their response to tectonic deformation remain relatively limited.

    Methods

    Based on a 30-meter-resolution Copernicus Digital Elevation Model (DEM), 98 sub-basins were identified within the Upper Yalong River basin. Five geomorphic indices were calculated for each sub-basin: hypsometric integral (HI), basin shape index (BS), asymmetry factor (AF), elongation ratio (Re), and mean normalized stream gradient index (SLKavg). These indices were quantified, classified, and integrated into a composite indicator—the relative strength of tectonic activity (Iat). Furthermore, the normalized channel steepness index (ksn) and knickpoints were incorporated to reveal the spatial differentiation of fluvial geomorphic characteristics and to explore the coupling relationship between tectonic activity and landscape evolution.

    Results

    In the Upper Yalong River basin, HI values range from 0.09 to 0.63. Some sub-basins are in an early stage of development and exhibit significant asymmetry. Left-lateral offsets of waterways, gullies, and alluvial fans are observed. SLKavg and ksn indicate strong tectonic uplift in most basins, accompanied by significant longitudinal variations in channel slope. Spatially, the Iat displays a pattern of alternating high and low values, with interconnected low-activity zones. Basins with low Iat values are distributed in linear belts along fault zones. Along the Wudaoliang–Changshagongma fault, which crosses the upper basin, Iat values are lower in the northern and southern Holocene-active segments. In contrast, the middle segment intersecting the Changshagongma Basin shows higher Iat values, possibly related to localized variations in tectonic deformation along fault segments. Basins traversed by the Ganzi–Yushu fault also exhibit relatively low Iat values, corresponding to strong activity at the block boundary. The geomorphic indices affect Iat in the order: Re > HI > AF > SLKavg > BS.

    Conclusions

    The strong consistency among tectonic activity, geomorphic features, and seismic activity in the study area directly reflects the role of tectonic processes in shaping the regional landscape pattern. The spatial differentiation of Iat and geomorphic indices effectively captures differential tectonic uplift and deformation along fault zones, providing clear geomorphic evidence of ongoing tectonic dynamics on the southeastern margin of the Bayan Har block.

  • Chaoqun WANG, Dongxia SUN, Yaoling ZHANG, Xiaoxiao YANG, Lei ZHANG, Daogong HU
    Journal of Geomechanics. 2026, 32(3): 656-669.
    Objective

    Establishing a long-term typhoon sequence by identifying ancient storm surge records and extreme storm surge elevation events holds significant scientific and practical value for predicting future storm disasters. Previous research on storm surge deposits has predominantly focused on the eastern part of Hainan Island, while relatively limited attention has been given to the extreme storm events in the coastal bays and estuaries along the Qiongzhou Strait—the areas most severely affected by storm surges.

    Methods

    This study investigates a 3.2-m-thick shell ridge in Wushu Village, Dongzhai Port, located in the southern part of Puqian Bay on Hainan Island. Analyses of sedimentary structures, shell origins, AMS 14C dating of shells, geochemical indicators, and microfossile assemblages indicate that the shell ridge records a super-strong storm surge and an extreme surge elevation event that occurred 4,400 years ago. The ridge was deposited on a Late Pleistocene coastal plain landward of the Holocene high-sea-level paleo-coastline.

    Results

    The 14C ages of nine shells range from 4,402 to 6,647 a B.P., showing age inversions and the coexistence of older and younger shells. The shells are well-sorted and exhibit hummocky bedding, parallel bedding, wavy bedding, scour surfaces, and soft-sediment deformation structures.

    Conclusions

    Comparison of fossil species and shell 14C ages between the shell ridge and drill cores from the new coastal plain of Dongzhai Port indicates that the fossils in the shell ridge originated from the nearby sedimentary layers of the Puqian Bay estuary. Integrated analysis of the fossil ages, erosional scour surfaces, soft-sediment deformation structures, and Holocene sea-level changes suggests that the shell ridge in Wushu Village was formed through multiple storm-induced aggradation events occurring 4,400 years ago. Given the elevation of the highest storm deposit pinch-out point, the storm surge height reached at least 5.5 m. This surge height is close to the extraordinary storm surge height (5.9 m) recorded in Leizhou Bay during Typhoon 8007, which crossed the Qiongzhou Strait in 1980. [Significance] This study provides crucial scientific evidence for the prevention and mitigation of extreme storm surge disasters in Hainan, offering valuable insights for regional disaster risk reduction and coastal management.

  • Hulu JING, Weitao WANG, Kang LIU, Zhigang LI, Yipeng ZHANG, Lejun LU, Peizhen ZHANG
    Journal of Geomechanics. 2026, 32(3): 670-682.
    Objective

    The Tianshan is an intracontinental orogenic belt reactivated in the Cenozoic by far-field effects of the India-Asia collision. Its Cenozoic tectonic evolution is thus key to understanding intracontinental deformation mechanisms.

    Methods

    Based on stratigraphic sedimentary characteristics and provenance tracing of a section on the northern margin of the Turpan Basin (south of the Bogda Shan), the Late Cretaceous to Cenozoic tectonic and geomorphic evolution of the East Tianshan and its adjacent region has been constrained.

    Results

    Field investigations reveal that the Paleocene and lower Oligocene strata in this area consist predominantly of red mudstones, indicating a lacustrine environment and stable tectonic conditions. The uppermost Cretaceous and Eocene strata contain relatively thin conglomerate deposits with small clast diameters, suggesting slight tectonic uplift of the Bogda Shan. In contrast, the upper Oligocene to Pliocene strata are composed of extremely thick, coarse conglomerates, reflecting long-term and intense tectonic activity. Detrital zircon U-Pb ages show that, from the Late Cretaceous to the Oligocene, the northern Turpan Basin continuously received detrital material from the West Tianshan, implying low topographic relief of the Bogda Shan during this period. Since the Miocene, however, the Bogda Shan has become the primary sediment source, indicating its rapid tectonic uplift.

    Conclusions

    In summary, the Bogda Shan remained tectonically stable with low relief during the Late Cretaceous to Oligocene. Since the late Oligocene, it has undergone intense deformation and rapid uplift, becoming the sole provenance area for the northern Turpan Basin. [Significance] This study refines the Cenozoic tectono-geomorphic evolution of the East Tianshan, thereby contributing to a better understanding of the intracontinental deformation processes resulting from the India–Asia collision.

  • Yipeng ZHANG, Liubiao XIE, Ruizhi JIN, Xuzhang SHEN, Xiaohui HE, Hulu JING, Kang LIU, Yang WANG, Peizhen ZHANG
    Journal of Geomechanics. 2026, 32(3): 683-703.
    Objective

    Tectonic vergence records the geometric asymmetry and kinematic directionality of shortening during orogenic thickening and provides a key link between surface deformation and lithospheric-scale geodynamics. Although vergence is widely used in structural geology, its expression at the scale of entire orogenic belts remains insufficiently clarified, especially in intracontinental settings where stable plate-boundary subduction is absent. This study aims to compare vergence patterns from plate-margin orogens to intracontinental mountain belts and to identify the mechanisms controlling their formation, maintenance, weakening, and transformation.

    Methods

    We synthesize five representative orogenic systems: the Central Andes, Taiwan, the Alps, the Qilian Shan, and the Tian Shan. Surface structural styles, fold–thrust belt geometry, orogen–foreland basin coupling, geomorphic evolution, modern crustal deformation, seismicity, and lithospheric architecture — constrained by Moho/LAB geometry and geophysical imaging — are integrated to evaluate vergence at multiple scales.

    Results

    Plate-margin convergent systems commonly develop stable one-sided tectonic vergence. In the Central Andes, long-lived subduction of the Nazca slab provides persistent asymmetric forcing, causing shortening to be localized above the subduction interface and transmitted eastward toward the retroarc and foreland. The Altiplano Plateau, with crustal thickness locally reaching 60–75 km, records progressive Cenozoic crustal thickening, uplift, and eastward propagation of deformation. Taiwan, as a young arc–continent collision system, locally records early-stage bidirectional deformation around the Central Range and arc-side backthrusting near the Longitudinal Valley–Coastal Range system. However, foreland basin evolution, westward migration of the frontal fold–thrust belt, and modern shortening concentrated along the western Taiwan thrust system indicate that its long-term, orogen-scale, dominant vergence remains west-directed. The Alps demonstrate that tectonic vergence is time-dependent. During early subduction and continental collision, deformation was localized along a single subduction interface, producing a north-vergent simple-shear-dominated architecture. After collision, slab break-off, eclogitization of the orogenic root, and thermomechanical reorganization weakened the earlier interface-controlled deformation and promoted strain redistribution across both flanks of the orogen, leading to paired north- and south-vergent thrust systems and a more symmetric collisional structure. In intracontinental orogens, stable one-sided vergence is not guaranteed. The Qilian Shan and Tian Shan lack compelling evidence for a continuous, long-lived, single-sided lithospheric subduction interface. Their deformation is mainly expressed by distributed crustal thickening, high-angle reverse faulting on opposing flanks, and near-symmetric shortening. Recent studies from the Qilian Shan further show that lithospheric-scale tectonic wedges may develop along basin–mountain transition zones, where relatively rigid basin lithosphere wedges into the weakened lower crust of a thickened orogen. Such wedge structures are best interpreted as local expressions within a pure-shear, vertically coherent deformation framework rather than as large-scale simple-shear intracontinental subduction.

    Conclusions

    Lithospheric-scale tectonic vergence is controlled by the coupling among boundary conditions, negative-buoyancy forcing, and lithospheric strength–buoyancy structure. Persistent single-sided slabs or effective negative-buoyancy sources favor stable simple-shear vergence, whereas slab break-off, loss of one-sided forcing, and mechanically strong opposing blocks favor distributed pure-shear thickening and weak or near-symmetric vergence. [Significance] This study provides a unified framework for interpreting tectonic vergence from plate margins to continental interiors. It highlights vergence as a geometrically testable indicator for linking surface deformation, basin–orogen coupling, and lithospheric-scale geodynamic processes.

  • Lijuan ZHANG, Zhiliang ZHANG, Zhikun REN, Guodong BAO, Yutao NING
    Journal of Geomechanics. 2026, 32(3): 704-720.
    Objective

    The West Kunlun Orogenic Belt, located on the northwestern margin of the Tibetan Plateau, is a key area for studying the tectonic uplift and expansion of the plateau. However, the Cenozoic uplift of the West Kunlun Orogenic Belt is still controversial.

    Methods

    This study focuses on the well-exposed Late Cenozoic sediments on the Puska Anticline, West Kunlun foreland. High-resolution magnetostratigraphy was applied to constrain the age of the lower boundary of the growth strata, providing insight into the uplift timing of the West Kunlun Orogenic Belt from the perspective of mountain-basin coupling.

    Results

    Magnetic analysis indicates that hematite and magnetite are the dominant remanence carriers. The high-resolution magnetostratigraphy reveals an age range of ~6.8 to 2.4 Ma for the Puska Section, and the base age of the growth strata is ~5.3 Ma, indicating that the deformation of this anticline was initiated at ~5.3 Ma.

    Conclusions

    Integrating previously published results of sedimentation, tectonics, and low-temperature thermochronology in the West Kunlun foreland, this study proposes that the West Kunlun Orogenic Belt has undergone an episode of intensive uplift since ~5.3 Ma. This suggests that the Tibetan Plateau has experienced significant uplift since the beginning of the Pliocene, with tectonic strain beginning to propagate toward the Tarim Basin. [Significance] This study provides new perspectives and evidence for understanding the complex relationship between the uplift of the Tibetan Plateau and the sedimentary responses in its periphery, contributing to further unraveling the comprehensive impact of the Tibetan Plateau.

  • Tao GUAN, Lei WU, Bo YANG, Dong JIA, Xiaojun WU, Shufeng YANG, Hanlin CHEN
    Journal of Geomechanics. 2026, 32(3): 721-740.
    Objective

    Physical analog modeling is an effective laboratory method for reconstructing geological structure evolution, yet conventional normal-gravity experiments face limitations due to significant deviations in stress levels compared to natural prototypes. Hypergravity technology offers a novel pathway to address this issue and has emerged as a frontier approach for investigating deep and large-scale spatio-temporal scale Earth deformation.

    Methods

    This paper systematically reviews the research progress of hypergravity tectonic physical analog modeling, summarizes the characteristics and applications of experimental devices including small laboratory centrifuges and cantilever centrifuges used worldwide, analyzes the suitability of non-powered and powered driving systems, elaborates on the application principles of analog material systems for ductile, brittle, and complete crustal profiles, and introduces key techniques for surface deformation observation and internal structure detection.

    Conclusions

    Through the analysis of analog experiments simulating compressional structures, extensional structures, diapirs, and subduction, the unique advantages of hypergravity in amplifying density-driven effects, accelerating tectonic deformation, and improving simulation similarity are revealed, with specific patterns of its influence on structural styles and propagation processes clarified. During the research, the authors also developed a hypergravity physical analog modeling experimental chamber compatible with the Zhejiang University ZJU400 centrifuge and conducted related experimental studies.

    Significance

    This research provides a systematic reference for methodological innovation and theoretical development in hypergravity physical analog modeling, and holds positive significance for advancing structural geology toward quantification and interdisciplinary integration.

  • Bing YAN
    Journal of Geomechanics. 2026, 32(3): 741-758.
    Objective

    In tectonic geomorphology, physical modeling is a key tool for investigating the interactions between tectonics, climate and surface processes. A fundamental challenge lies in establishing similarity between analog laboratory experiments and natural landscapes, which differ greatly in scale, materials, and boundary conditions. This review systematically evaluates progress and remaining challenges in similarity in analog modeling.

    Methods

    This paper reviews experimental studies using silica powder or the “MatIV” composite material under controlled conditions of rainfall and tectonic uplift. A comparative framework based on geomorphic parameters (basin self-similarity, sinuosity, spacing ratio, Hack’s law, hypsometric integral, slope-area relationships, knickpoint migration, erosion rates, and χ analysis) is adopted to identify consistent findings and discrepancies between experimental and natural landscapes.

    Results

    In terms of similarity in fluvial morphology, experimental drainage basins exhibit self-similarity over a range of scales, with shape parameters (spacing ratio, Hack exponent) falling within natural ranges. Hypsometric integrals transition from convex to S-shaped as uplift slows, mimicking mature landscapes. The concavity index approaches natural values in sufficiently large basins. Regarding erosion process similarity, experimental erosion rates increase nonlinearly with slope, and a clear shift from fluvial incision to gravity-dominated erosion occurs on steeper slopes, mirroring natural behavior. Derived time scaling has been validated across compressional, extensional, and strike-slip settings. Knickpoint retreat follows a power law with upstream area and can migrate at a constant rate, indicating an intrinsic landscape response. With respect to erosional dynamics similarity, experimental erosion regimes are mixed: detachment-limited in headwaters and transport-limited downstream. The χ value successfully predicts main drainage divide migration toward higher χ values, consistent with theoretical expectations and natural observations.

    Conclusions

    Despite differences in large-scale and material, analog experiments reproduce key features of natural tectonic landscapes in terms of morphology, erosion processes, and erosional dynamics, including self-similarity, Hack scaling, knickpoint dynamics, and divide migration. This “unreasonable effectiveness” arises from the scale independence of landscape dynamics. Current limitations include lower concavity indices in small basins, insufficient quantification of the steepness index, boundary effects on sinuosity, and oversimplified erosion mechanisms.

    Significance

    This review provides a systematic synthesis of similarity criteria for physical models of tectonic geomorphology, bridging analog experiments and natural landscapes. It also offers a practical framework for model validation and future quantitative applications in tectonic and climatic research.

  • Jinzhou WANG, Gang RAO, Xiaorui DENG, Biao WANG, Bing FANG, Qiang LUO, Zhongbo XU, Chenhao XU
    Journal of Geomechanics. 2026, 32(3): 759-770.
    Objective

    The collision and ongoing convergence between the Indian and the Eurasian plates have driven the uplift and expansion of the Tibetan Plateau and the formation of a mountain–basin system rich in oil and gas resources. Fold-and-thrust belts, as important structural units accommodating compressive shortening, have long been a focal and challenging topic in structural geology research due to their complex structural styles and deformation histories. This study focuses on the Wuyitage area in the foothill belt of the southwestern Tarim Basin, and synthesizes previous investigations on the lateral variations in structural styles, detachment layers, and paleo-uplift distribution.

    Methods

    Through the application of the discrete-element numerical simulation method, the coupled process between the basin and the mountain under the combined influence of multiple factors is explored.

    Results

    The thrust belt in the study area exhibits significant structural segmentation, with its geometry largely governed by regional detachment layers such as the Paleogene gypsum-salt layer. The thickness of the detachment layer directly influences fault slip efficiency and deformation intensity. A thicker detachment layer strengthens the detachment effect, promotes decoupling between the upper and lower strata, and facilitates the propagation of thrust structures toward the hinterland. In contrast, a thinner detachment layer weakens the detachment effect, making faulting more prone to occur along pre-existing basement faults. The presence of Ulagen and other paleo-uplifts have also played a dominant role in the development of thrust faults by reconstructing the regional stress field and the mechanical properties of the strata.

    Significance

    This study reveals the main controlling mechanism of the differential structural deformation styles in the Wuyitage area of the southern Tarim Basin, providing an important basis for better understanding the basin–range coupling and its potential resources and environmental effects in the study area.

  • Dongming WANG, Jianmin HU, Yuanfang ZHAO, Jiyuan YAN, Wangbin GONG, Zhigang ZHANG
    Journal of Geomechanics. 2026, 32(2): 285-311.
    Objective

    The growth and evolution of the early Earth’s crust are hot topics in Precambrian research. As one of the oldest cratons in the world, the North China Craton (NCC) has undergone a complex cratonization process accompanied by crustal growth and reworking.

    Methods

    Existing petrological, geochemical, chronological, and structural geological studies are summarized to reveal the tectonic evolution of the Luxi granite–greenstone belt in the eastern NCC.

    Results

    Multiple lines of evidence indicate late Neoarchean crustal growth, including continental arc and arc magmatic rocks represented by the Feicheng‒Tengzhou magmatic arc and late Neoarchean volcanic rocks, post-collisional crustal-derived magmatism represented by the Lushan‒Yishui magmatic belt, sedimentation in a back-arc basin defined by late Neoarchean metamorphic sedimentary rocks, and the strike-slip shear deformation caused by the oblique convergence of plates. The >2.60 Ga tonalite, trondhjemite, granodiorite (TTG) suite and the supracrustal rock belt exposed in the central part of the Luxi area represent an ancient microcontinent with apparent affinity to the Jiaoliao Block.

    Conclusions

    Therefore, the Luxi granite–greenstone belt is an accretionary orogenic belt located on the western margin of the Jiaoliao Block, namely the Luxi Orogenic Belt. High-angle oblique arc-continent collision and underplating of large volumes of mantle-derived magma represent two crustal growth modes in horizontal and vertical directions, respectively. This orogenic belt has undergone multi-stage evolution, including the formation of initial oceanic crust, subduction, and intracontinental extension from the Neoarchean to the end of the Paleoproterozoic. [Significance] In the late Neoarchean, extensive crustal growth occurred around the Jiaoliao Block in the eastern NCC, which was controlled by an early plate tectonic regime characterized by hot subduction.

  • Lin GUO, Yang CHU, Wei LIN, Yiyang LEI, Tanjie LIU, Yilin GUO, Lingtong MENG
    Journal of Geomechanics. 2026, 32(2): 312-332.
    Objective

    Oblique convergence between the Indo-Australian Plate and the Eurasian Plate produced a ~1,900-km-long dextral strike-slip fault—the Sumatran Fault—within the overriding plate. While previous studies have extensively examined its geometry, kinematics, and seismicity, the tectonic evolution of the fault remains poorly constrained.

    Methods

    This study integrates multidisciplinary evidence from structural geology, geomorphology, seismicity analysis, geodesy (GPS), low-temperature thermochronology (apatite and zircon (U-Th)/He dating), and volcanic distribution mapping. We systematically synthesize data on fault segmentation, slip rates, cumulative displacement, magmatic-tectonic relationships, and regional geodynamic models to evaluate the fault’s spatiotemporal evolution.

    Results

    The Sumatran Fault is a highly segmented dextral strike-slip system that can currently be divided into 19 segments based on geometric complexity and seismic activity. Slip rates along the fault are relatively uniform from south to north, with an average around 15 mm/yr, and a total cumulative displacement of approximately 20~25 km. Regionally, the distribution of active arc magmatism closely aligns with the trace of the fault, indicating a dynamic interaction between faulting and magmatism: while magma-induced crustal weakening facilitates fault development, extensional zones associated with normal faulting in turn influence the volcanic activity. Despite its tectonic significance, low-temperature thermochronological studies on the Sumatran Fault remain limited. Existing thermochronological data reveal a period of rapid uplift at ~2 Ma, likely driven by dip-slip motion along the fault.

    Conclusions

    A three-stage model is proposed. Before 2 Ma, oblique convergence was primarily accommodated by forearc faults (e.g., Mentawai Fault) and shear zones. Around 2 Ma, the Sumatran Fault initiated contemporaneously with the Mentawai Fault, manifesting strain localization in the overriding plate. At present, the Sumatran Fault accommodates the majority of the strain, while strike-slip motion on the Mentawai Fault has significantly diminished. The uplift phase correlates with the initial timing of the Sumatran Fault inferred from present-day slip rates and cumulative offsets, suggesting that the current through-going structure of the fault and the modern tectonic framework were established at the same time. [Significance] This study provides a comprehensive synthesis of multidisciplinary constraints on the Sumatran Fault and establishes a unified spatiotemporal framework for its tectonic evolution. By integrating fault segmentation, slip rates, thermochronological data, and magmatic–tectonic interactions, this study clarifies the timing of fault initiation and the development of the present-day tectonic architecture. The results offer new insights into strain partitioning and the formation of trench-parallel strike-slip faults at obliquely convergent margins, providing a valuable reference for understanding similar plate boundary systems and their associated seismic hazards.