收藏切换
Similarity in geomorphic physical modeling and its application to tectonic geomorphology: A review
收藏切换
Bing YAN*
Journal of Geomechanics | 2026, 32(3) : 741 - 758
Less
收藏切换
Journal of Geomechanics | 2026, 32(3): 741-758
Similarity in geomorphic physical modeling and its application to tectonic geomorphology: A review
Full
Bing YAN*
Affiliations
  • School of Earth Sciences and Engineering, Xi’an Shiyou University, Xi’an 710065, Shaanxi, China
Published: 2026-06-28 doi: 10.12090/j.issn.1006-6616.2026015
Outline
收藏切换
Objective

In tectonic geomorphology, physical modeling is a key tool for investigating the interactions between tectonics, climate and surface processes. A fundamental challenge lies in establishing similarity between analog laboratory experiments and natural landscapes, which differ greatly in scale, materials, and boundary conditions. This review systematically evaluates progress and remaining challenges in similarity in analog modeling.

Methods

This paper reviews experimental studies using silica powder or the “MatIV” composite material under controlled conditions of rainfall and tectonic uplift. A comparative framework based on geomorphic parameters (basin self-similarity, sinuosity, spacing ratio, Hack’s law, hypsometric integral, slope-area relationships, knickpoint migration, erosion rates, and χ analysis) is adopted to identify consistent findings and discrepancies between experimental and natural landscapes.

Results

In terms of similarity in fluvial morphology, experimental drainage basins exhibit self-similarity over a range of scales, with shape parameters (spacing ratio, Hack exponent) falling within natural ranges. Hypsometric integrals transition from convex to S-shaped as uplift slows, mimicking mature landscapes. The concavity index approaches natural values in sufficiently large basins. Regarding erosion process similarity, experimental erosion rates increase nonlinearly with slope, and a clear shift from fluvial incision to gravity-dominated erosion occurs on steeper slopes, mirroring natural behavior. Derived time scaling has been validated across compressional, extensional, and strike-slip settings. Knickpoint retreat follows a power law with upstream area and can migrate at a constant rate, indicating an intrinsic landscape response. With respect to erosional dynamics similarity, experimental erosion regimes are mixed: detachment-limited in headwaters and transport-limited downstream. The χ value successfully predicts main drainage divide migration toward higher χ values, consistent with theoretical expectations and natural observations.

Conclusions

Despite differences in large-scale and material, analog experiments reproduce key features of natural tectonic landscapes in terms of morphology, erosion processes, and erosional dynamics, including self-similarity, Hack scaling, knickpoint dynamics, and divide migration. This “unreasonable effectiveness” arises from the scale independence of landscape dynamics. Current limitations include lower concavity indices in small basins, insufficient quantification of the steepness index, boundary effects on sinuosity, and oversimplified erosion mechanisms.

Significance

This review provides a systematic synthesis of similarity criteria for physical models of tectonic geomorphology, bridging analog experiments and natural landscapes. It also offers a practical framework for model validation and future quantitative applications in tectonic and climatic research.

tectonic geomorphology  /  physical modeling  /  similarity  /  geomorphic parameters  /  erosional dynamics
闫兵. 构造地貌物理模拟实验相似性研究进展及其应用综述. 地质力学学报, 2026 , 32 (3) : 741 -758 . DOI: 10.12090/j.issn.1006-6616.2026015
Bing YAN. Similarity in geomorphic physical modeling and its application to tectonic geomorphology: A review[J]. Journal of Geomechanics, 2026 , 32 (3) : 741 -758 . DOI: 10.12090/j.issn.1006-6616.2026015
  • This research is financially supported by National Natural Science Foundation of China (Grant No. 42572265).
Year 2026 volume 32 Issue 3
42
21
Cite this Article
BibTeX
Article Info
doi: 10.12090/j.issn.1006-6616.2026015
  • Receive Date:2026-01-28
  • Online Date:2026-11-18
  • Published:2026-06-28
Article Data
Affiliations
History
  • Received:2026-01-28
  • Revised:2026-05-25
  • Accepted:2026-05-25
Funding
This research is financially supported by National Natural Science Foundation of China (Grant No. 42572265).
Affiliations
    School of Earth Sciences and Engineering, Xi’an Shiyou University, Xi’an 710065, Shaanxi, China
References
Share
https://castjournals.cast.org.cn/joweb/dzlxxb/EN/10.12090/j.issn.1006-6616.2026015
Share to
QR

Scan QR to access full text

Cite this article
BibTeX
Citations
表12种不同金属材料的力学参数
科
Family
属数
Number of
genus
种数
Number of
species
占总种数比例
Percentage of
total species (%)
属
Genus
种数
Number of
species
占总种数比例
Percentage of total
species (%)
鹅膏菌科Amanitaceae 2 11 5.26 鹅膏菌属 Amanita 10 4.78
小菇科 Mycenaceae 2 12 5.74 丝盖伞属 Inocybe 5 2.39
多孔菌科 Polyporaceae 8 14 6.70 蜡蘑属 Laccaria 5 2.39
红菇科 Russulaceae 3 23 11.00 小皮伞属 Marasmius 6 2.87
小菇属 Mycena 11 5.26
光柄菇属 Pluteus 5 2.39
红菇属 Russula 17 8.13
栓菌属 Trametes 5 2.39
关闭全屏
  • BibTeX
  • EndNote
  • RefWorks
  • TxT