Home Latest Articles
Latest Articles
  • Jia MA, Dengfa HE, Guo LU, Weikang ZHANG, Hanyu HUANG, Chiyue LIU
    Journal of Geomechanics. 2025, 31(3): 444-457.
    Objective

    As ubiquitous critical structural units in sedimentary basins, weak layers are characterized by low shear strength, low Young’s modulus, and pronounced plastic rheological behavior, playing a key role in stress accommodation and strain partitioning during tectonic deformation. Seismic reflection profiles from areas such as Liangcun, Jiaoshiba, and Changning in southeastern Sichuan reveal widespread regional weak layers within sequences overlying deep thrust fault systems.

    Methods

    To investigate the dynamic control mechanism of weak layers on thrust deformation, a typical bend fault was selected as the pre-existing fault structure, and comparative experiments with/without weak layers were designed. Finite element modeling was employed to conduct numerical simulations under lateral compression. A comparative analysis of the simulation results from the two model sets systematically examines how weak layers control structural deformation during tectonic movement, particularly the influence of weak layer thickness on upper and lower structural deformation.

    Results

    (1) The weak layer-free model demonstrates that, under lateral compression, the overlying strata undergo thrust-parallel slip and fold deformation along the pre-existing bend fault. The deformation exhibits remarkable coherence among strata, with no observable interlayer slip or stratified differential deformation. Meanwhile, the maximum principal stress field displays characteristic tectonic stress zoning, while plastic strain concentrates on both the forelimb and the backlimb with upward-decreasing intensity. (2) The weak layer-bearing model reveals that, under combined lateral compression and underlying structural uplift, the weak layer experiences plastic flow, manifesting as top-thinning and limb-thickening. This results in stratified deformation patterns bounded by the weak layer. Furthermore, the distribution of maximum principal stress and plastic strain shows distinct stressen–strain decoupling across the weak layer interface.

    Conclusion

    (1) The weak layer constitutes a critical factor in initiating structural stratification. Under lateral compression conditions, the weak layer undergoes plastic flow accompanied by localized thickening and thinning. It significantly accommodates underlying structural deformation and stress-strain, thereby generating differential deformation across the weak layer interface and producing distinct stress-strain decoupling between the upper and lower structural domains. (2) The thickness of weak layers constitutes a critical parameter controlling deformation styles. Thicker weak layers result in longer wavelengths and gentler limb dips with reduced uplift amplitudes for overlying folds; they also produce shorter wavelengths, steeper limb dips and greater uplift amplitudes for underlying folds, thereby enhancing deformation partitioning. Conversely, thinner weak layers lead to more coherent deformation between the upper and lower structural domains. [Significance] The research findings regarding the influence of weak layers on thrust structural deformation revealed in this study can provide valuable references for structural deformation analysis and dynamic modeling in regions with similar stratigraphic characteristics, such as the Liangcun area, the Jiaoshiba block, and the Changning region in southeastern Sichuan.

  • Xiangqian DAI, Chenghu WANG, Guiyun GAO, Xinshuai YANG, Jikun LIU
    Journal of Geomechanics. 2025, 31(3): 458-474.
    Objective

    The challenges posed by high in-situ stress along the newly constructed Sichuan–Tibet railway are significant, characterized by frequent catastrophic events such as rock bursts and large deformations in soft rocks, which substantially impact tunnel construction for the Sichuan–Tibet railway.

    Method

    Based on 366 sets of in-situ stress measurement data from the Yalin section of the Sichuan–Tibet railway and 28 documented cases of tunnel catastrophes in the areas along the Sichuan–Tibet railway, this study analyzes the characteristics of in-situ stress along the route, categorizes the catastrophic events, and evaluates the high in-situ stress conditions of the Sichuan–Tibet railway.

    Results

    In the B218, B219, and B222 stress divisions traversed by the Yalin section of the Sichuan–Tibet railway, the maximum (SH) and minimum (Sh) horizontal principal stresses increase with depth. Within a burial depth of 1000 m, SH and Sh range from 30.80–37.50 MPa and 21.40–23.56 MPa, respectively. At a burial depth of 2500 m, SH and Sh increase to 69.80–90.0 MPa and 48.40–56.56 MPa, respectively. The preferred orientations of SH are NWW, NW, and NE, consistent with focal mechanism solutions, albeit with some local deviations. The lateral pressure coefficient (kH/kh) is generally greater than 1, indicating that the Sichuan–Tibet railway is predominantly influenced by SH. Stress values in each stress division exhibit the pattern SH > SV > Sh, reflecting a strike-slip fault stress state in the deeper regions below 500 m burial depth. The stress accumulation level (μm) values for each stress division are concentrated around 0.3, suggesting a low regional stress accumulation level. Among the 28 documented tunnel catastrophe cases (12 involving rock bursts and 16 involving large deformations in soft rocks), the minimum burial depth for tunnels experiencing rock bursts is 700 m, while the minimum burial depth for tunnels experiencing large deformations in soft rocks is 275 m. Six tunnels are rated as under high stresses, and eight tunnels are rated as under extremely high stresses. High in-situ stress serves as the energy source and the fundamental cause of frequent catastrophes.

    Conclusion

    Through comparing the actual grades of tunnel disasters, the most appropriate criterion for predicting rock burst and large deformations in Sichuan–Tibet railway tunnels is determined after comparison and selection. Therefore, they should be prioritized in the studies for the subsequent construction of Sichuan–Tibet railway tunnels as a reference basis. [Significance] The research findings offer crucial evidence for the analysis of in-situ stress states and the prevention and control of high in-situ stress disasters in the regions along the Sichuan–Tibet railway, and possess significant engineering guiding significance for enhancing the safety of tunnel engineering and construction efficiency.

  • Mariia TRIMONOVA, Yuri STEFANOV, Nikita DUBINYA, Rustam BAKEEV
    Journal of Geomechanics. 2025, 31(3): 475-490.
    Objective

    The work is devoted to the study of irreversible deformation of artificial samples subjected to a set of standard experiments, with an aim to study their mechanical properties. The principal idea of the study is related to the preparation of an artificial material with an established constitutive behavior model. The existence of such a well-described material provides future opportunities to conduct controllable experiments on various mechanical processes in rock-like material for further development and validation of theoretical models used in rock mechanics.

    Methods

    A set of artificial samples was prepared for careful assessment through a number of loading tests. Experimental work was carried out to determine the rheological properties under conditions of triaxial compression tests and uniaxial tension. Triaxial loading tests are completed for 9 samples with varying radial stress levels (0–5 MPa). The samples are loaded up to the yield point with control of radial and volumetric strain. The experimental results, which contain the obtained interrelationships between axial and radial stresses and strains, are analyzed using the Drucker-Prager yield surface. Material hardening is taken into account through the non-associated plastic flow law with the cap model. Numerical modeling of sample loading is performed through the finite difference method. Mathematical model parameters are adjusted to minimize the discrepancy between numerical modeling results and experimental data. The design of a series of experimental studies necessary to determine all the parameters of the model has been studied.

    Results

    It is shown that the formulated mathematical model allows to reliably reproduce the inelastic behavior of the studied material, and it can be used to solve a set of applied problems in continuum mechanics, the problem of numerical simulation of hydraulic fracture growth in an elastoplastic medium in particular. It was found that for the entire range of applied lateral loads (0 – 5 MPa), the elastic limit varied from 2 to 4 MPa, after which the material began to behave plastically. It was also determined that at lateral loads ≥ 3 MPa, compaction began to appear in the material beyond the yield point. Judging by the dependence of volumetric strains under a lateral load equal to 1.4 MPa, compaction should begin to appear even at lateral loads lower than 3 MPa.

    Conclusion

    Taking the plastic behavior of the material into account is necessary when moving on to modeling the hydraulic fracturing process in such a material, and the resultant plasticity parameters for the model material can be used for numerical modeling of elastoplastic deformation of the rock under consideration, including processes such as hydraulic fracture growth in a poroelastoplastic medium. [Significance] The suggested procedure to interpret results of experimental studies can be used for further numerical modeling of mechanical processes in rock masses with inelastic strain accumulation. This opportunity can increase the reliability of geomechanical models used for the optimization of hydrocarbon fields development.

  • Qianjun WANG, Jian ZHOU, Faqiang ZHANG, Hongzhou YU, Qianqian WU, Hongli LU, Qingxin LIU, Yu ZHOU, Ming CHENG, Jianzhao YAN, Yanfang LYU
    Journal of Geomechanics. 2025, 31(3): 491-505.
    Objective

    The Hala’alat Mountain front-overthrust belt, renowned for its abundant hydrocarbon resources, is characterized by multi-layer oil-bearing systems and intricate source-reservoir relationships. Ultra-shallow strata have emerged as an important domain for resource evaluation and exploration in this region. However, the timing of hydrocarbon charging and adjustment processes and the complex accumulation mechanisms of ultra-shallow reservoirs remain inadequately understood, posing significant challenges for exploration planning and appraisal programs. This study endeavors to unravel the genetic characteristics, accumulation stages, and dynamic mechanisms of ultra-shallow reservoirs in the Hala’alat Mountain front, with the goals of enhancing the theoretical framework for hydrocarbon enrichment patterns in structurally complex zones and providing actionable insights for future exploration endeavors.

    Methods

    To achieve this objective, an integrated suite of analytical techniques was meticulously employed. Homogenization temperature measurements and salinity analysis of fluid inclusions were conducted to decipher thermal histories and fluid evolution. Quantitative grain fluorescence (QGF) analysis was utilized to track hydrocarbon migration pathways and accumulation dynamics. Calcite U–Pb geochronology provided precise temporal constraints for thermal events and hydrocarbon charging episodes. These methods were systematically applied to reservoir rock samples, enabling a comprehensive investigation of fluid inclusion characteristics, paleo-temperature evolution, and paleo-fluid interfaces. By constraining the thermal event chronology, we aimed to reconstruct the intricate hydrocarbon charging and adjustment processes that have shaped the current reservoir configuration.

    Results

    (1) The analysis revealed a diverse array of fluid inclusion types, with variations in fluorescence color and intensity indicative of multiple stages of hydrocarbon charging, each with a distinct maturity levels. The homogenization temperatures of aqueous inclusions exhibited two predominant intervals: 70–90°C and 100–130°C. These temperature ranges correspond to distinct thermal episodes, reflecting varying paleo-thermal regimes that influenced hydrocarbon maturation and migration. (2) The QGF profiles provided compelling evidence of dynamic hydrocarbon migration processes, showcasing multiple northward adjustments and accumulations over geological time scales. Notably, Jurassic strata displayed continuous charging characteristics, suggesting prolonged hydrocarbon influx, while Cretaceous reservoirs exhibited late-stage charging patterns, reflecting differential hydrocarbon charging histories across stratigraphic units. This stratigraphic variation in charging behavior offers crucial insights into the temporal and spatial distribution of hydrocarbons within the study area. (3) Calcite U–Pb dating identified two major thermal events at approximately 133 Ma (Early Cretaceous) and 73 Ma (Late Cretaceous). These events are temporally correlated with significant tectonic activities in the study area, including regional compression and fault reactivation. (4) The integration of homogenization temperatures, QGF data, and U–Pb ages revealed a two-phase hydrocarbon charging history. The first phase occurred during the Early Cretaceous (133 Ma), characterized by initial hydrocarbon accumulation driven by regional tectonic compression. The second phase took place during the Late Cretaceous (73 Ma), marked by structural adjustment and hydrocarbon redistribution. These phases were primarily driven by tectonic forces that facilitated vertical migration and redistribution of hydrocarbons into ultra-shallow traps, highlighting the interplay between tectonic events and hydrocarbon accumulation.

    Conclusions

    The ultra-shallow reservoirs in the Hala’alat front have undergone two critical accumulation phases: the Early Cretaceous initial charging phase and the Late Cretaceous structural adjustment phase. Hydrocarbon migration pathways were predominantly controlled by fault systems, which acted as migration carriers. The northward adjustments were facilitated by differential uplift and the caprock integrity, ensuring the preservation of hydrocarbons within the reservoirs. The coupling of fluid inclusion thermometry, QGF, and U–Pb dating has proven to be a robust and innovative toolkit for resolving multi-stage accumulation processes in complex thrust belts. This methodological integration not only enhances our understanding of hydrocarbon accumulation mechanisms but also provides a precise framework for identifying and dating these events. This study establishes a novel and comprehensive methodology for deciphering multi-phase hydrocarbon accumulation in tectonically active regions. [Significance] By offering critical insights into the timing, pathways, and driving mechanisms of hydrocarbon charging, this study provides a solid foundation for predicting ultra-shallow reservoir distributions in similar geological settings. The integration of chronostratigraphic and fluid dynamic analyses advances the theoretical understanding of hydrocarbon enrichment mechanisms in foreland thrust belts, with direct implications for exploration strategies and resource evaluation in analogous basins. Furthermore, the methodological framework developed in this study can be adapted and applied to other complex structural zones, potentially revolutionizing our approach of hydrocarbon exploration in challenging geological environments.

  • Yuhang LIU, Wei QIANG, Xin DANG, Bo LIU, Zhigang WEN, Weichao TIAN, Yunpeng FAN
    Journal of Geomechanics. 2025, 31(3): 506-521.
    Objective

    As a key producing horizon of the Ansai Oilfield in the Ordos Basin , the pore structure of Chang 7 Member of the Yanchang Formation directly controls reservoir quality, and consequently influences shale oil productivity. The Ansai Oilfield is facing depleted conventional resource and difficult reserve replacement, making shale oil reservoirs the main target for reserve growth. Therefore, characterizing the pore structure and constraining the genesis of different reservoirs is of great significance for oilfield exploration and development.

    Methods

    Targeting the interbedded shale oil reservoirs in the Chang 7 Member of the Ansai Oilfield, we carried out experiments including scanning electron microscopy, casting thin sections, low-temperature nitrogen adsorption, high-pressure mercury intrusion, and nuclear magnetic resonance, to identify the influence of pore size on the quality of the reservoirs, and to reveal the genesis of different reservoirs from the perspectives of depositional environment and diagenesis.

    Results

    The reservoir pores are predominantly composed of feldspar pores, residual intergranular pores, intergranular pores, clay intergranular pores, and a small number of microcracks. The feldspar pores are mainly micrometer-sized, while clay intergranular pores are dominantly nanometer-sized. The reservoir exhibits relatively high discharge pressures and low mercury injection saturation, with pore-throat radii predominantly at the nanometer scale. Most pores with diameters below 500 μm are open-type parallel plate-shaped and slit-shaped, with a small number of ink-bottle-type pores also developed. The pore sizes in the reservoir are predominantly below 300 μm, and as physical properties improve, the proportion of larger pores gradually increases.

    Conclusion

    The genesis of high-quality reservoirs can be categorized into two types. In the northeast, closer to the provenance area, strong hydrodynamic conditions lead to better sorting of rock particles, facilitating the development of chlorite coatings within the reservoir. These chlorite coatings can protect primary intergranular pores between particles, allowing more residual intergranular pores to be preserved after compaction, thus forming high-quality reservoirs. In contrast, the southwest area, being farther from the provenance, exhibits increasing water depth and weaker hydrodynamics. Due to its proximity to the source rock development zone, the reservoir is more susceptible to dissolution of organic acids from hydrocarbon source rocks, leading to the formation of numerous dissolution pores and the development of high-quality reservoirs. [Significance] The study can support the efficient exploration and development of shale reservoirs in the region.

  • Peng CAO, Yaqi YANG, Chaoyang ZHENG, Wei WANG, Yuanlin CHEN, Jianzhong LIU, Xinghua ZHAO
    Journal of Geomechanics. 2025, 31(3): 522-538.
    Objective

    The Jiaodong Peninsula is the largest gold metallogenic province in China and represents the third-largest gold enrichment region globally. Most gold deposits in this area formed during the Early Cretaceous and are significantly controlled by NNE–NE trending normal faults. Notably, there are more limited gold reserves from the east of the Jiaodong Peninsula compared with those from the northwestern region. The Guocheng gold deposit with a medium size is located in the northeast of the Jiaolai Basin and develops complex fault structures. These gold ore bodies are mainly hosted within faults but show poor distribution regularity. Thus, it is necessary to determine the ore-controlling structures.

    Methods

    Through detailed surface and underground geological investigations and structural analysis, this study reveals that ore bodies are primarily controlled by a thrust-faulting system and are mainly hosted within marbles of the Jingshan Group and Muniushan granitic pluton.

    Results

    Precise structural analysis reveals that the study area had undergone at least three-stage tectonic activities. The first stage (D1) was driven by nearly NW–SE compression and formed NE-trending faults and a series of associated secondary faults. The second stage (D2) involved the NW–SE extension, which developed numerous NE-trending intermediate-basic dike swarms and resulted in the development of the Tudui faults and extensional reactivation of NE-trending faults. During the third stage (D3), the nearly NE-SW compression formed some post-ore-formation structures, including new reverse faults and reactivated pre-existing structures.

    Conclusion

    This study identifies NE-trending faults as principal ore-controlling structures, and proposes the coupling relationships between ore-bearing faults and the Guocheng and Houkuangdong faults. These main ore-bearing structures belong to the tensional-shear secondary faults in the footwalls of the Guocheng and Houkuangdong faults. The conclusion predicts that there are potential ore bodies in the footwall of the Houkuangdong Fault, which is also further confirmed by the drilling project. [Significance] Although the Guocheng gold deposit was also formed in the Early Cretaceous, the ore-controlling structures in this region are obviously different from the northwestern of the Jiaodong Peninsula, suggesting the heterogeneity of extension deformation in the Jiaodong Peninsula during the mineralization stage. Therefore, the thrust-faulting system may be one of the key ore-controlling structures in the east of the Jiaodong Peninsula.

  • Haiyang WANG, Fujun ZHONG, Jiayong PAN, Fei XIA, Zhengle CHEN, Wenli LI, Jungang LIU, Yue SUN, Jie YAN, Jiaming QI
    Journal of Geomechanics. 2025, 31(3): 539-556.
    Objective

    The Lanhe pluton in northern Guangdong is located at the southeastern margin of the Zhuguangshan Complex and is primarily composed of gneissic biotite granite; its petrogenesis has not yet been determined.

    Methods

    This study applied LA–ICP–MS zircon U–Pb geochronology, whole-rock geochemistry, and zircon Hf isotope analyses to the Lanhe gneissic biotite granite.

    Results

    U–Pb dating indicates that the emplacement age of the Lanhe gneissic biotite granite is 427 ± 2 Ma, representing a product of the Caledonian magmatic activity. The geochemical characteristics show that the granite has SiO2 contents ranging from 71.53% to 75.41%, high total alkali contents (K2O + Na2O = 7.57%–8.23%), and high A/CNK values (1.00–1.06). It is enriched in Rb, Th, U, and K, but depleted in Ba, Y, Nb, Ta, Sr, and Yb. The LREE/HREE ratios range from 9.49 to 28.15, with significant Eu negative anomalies (δEu = 0.21–0.76). The zircon εHf(t) values of the samples are all negative (–11.8 to –5.2), with corresponding tDM2 values of 1806–2129 Ma.

    Conclusion

    Based on the geochemical and isotopic characteristics, the Lanhe gneissic biotite granite is identified as a highly fractionated I-type granite, primarily formed by partial melting of crustal metasedimentary rocks, including metagraywacke and metapelite. It is likely a product of the multi-stage reworking of the Paleoproterozoic basement during the Neoproterozoic to Early Paleozoic. The comprehensive study suggests that the Lanhe gneissic biotite granite formed in a syn-collisional tectonic setting during the Early Paleozoic in South China. [Significance] Integrated with the Zhuguang magmatic system and regional geological data, the Lanhe pluton likely represents a product of the transition from compressional thickening to post-collisional extension during the Caledonian Orogeny in South China. This transition may have been associated with intracontinental tectonic reorganization or external subduction–collision processes.

  • Bailin CHEN, Yun GAO
    Journal of Geomechanics. 2025, 31(2): 169-196.
    Objective

    The Dahutang tungsten ore field, located in the nearly EW-trending Jiuling uplift belt in northwestern Jiangxi Province, is a recently discovered area of concentrated, world-class, super-large, hydrothermal polymetallic tungsten deposits. It consists of two large tungsten deposits, namely Shimensi, Kunshan, and three medium-sized tungsten deposits, namely the Shiweidong, Dalingshang, Xin’anli deposits. The large Shimensi tungsten deposit is located in the north of the ore field, and the ore bodies are developed in Neoproterozoic granodiorite and Yanshanian granite. The mineralization is of quartz vein type, disseminated veinlet type, and hydrothermal crypto-explosive breccia type, and the three mineralization types occur regularly around the ore-forming granite mass. The ore bodies in the Shimensi tungsten deposit are obviously controlled by structure, but there is little research. Structure is the important ore-controlling factor. The analysis of ore-controlling structures and the construction of tectonic ore-controlling models can help to reconcile the formation and evolution of ore-forming structures and identify the main ore-controlling factors, which can provide technical support for prospection and prediction.

    Methods

    This study conducts a detailed field investigation of the ore-bearing fracture system, analyzes the combination of different types of ore-bearing fractures, explores the ore-forming conditions, and constructs a structural ore-controlling model.

    Results

    The research shows that the ore-bearing structure is a multi-directional small fault structure with the main trend being EW, followed by NEE and NWW; all the ore-bearing structures are present in a nearly elliptical distribution with EW-trending long axes. The ore-bearing structures change from the outside to the inside of the ore-forming granite, from those with conjugate dip at medium dip angles to those with sole outward dip at medium dip angles, and those with high dip angles; then hydrothermal crypto-explosion breccia appears in the center of the deposit. Among them, the ore-bearing conjugate shear fractures (with an X-shape in the profile) formed in the magmatic emplacement period little before mineralization in a tectonic stress field with a vertical maximum principal stress and a horizontal intermediate principal stress. The ore-bearing solely outward-dipping fractures with medium or high dip angles were formed as non-conjugate shear fractures and tension-shear fractures in the metallogenic period by hydrothermal crypto-explosion in a tectonic stress field with a vertical maximum principal stress and a horizontal intermediate principal stress. The hydrothermal crypto-explosion center formed in a tectonic stress field with a vertical maximum principal stress and similarly-sized intermediate and minimum principal stresses.

    Conclusion

    The ore-controlling structures of the Shimensi tungsten deposit are the emplacement structure of the ore-forming magmatic rock with an almost EW(NWW)-trending long axis and the hydraulic fracturing structure of the post-magmatic ore-forming fluid. The emplacement structure of the ore-forming magmatic rock, which was formed a little earlier and distributed over a larger area, developed mainly in the overlying surrounding rock (Neoproterozoic granodiorite) on the top of the ore-forming granite rock mass. The hydraulic fracturing structure of the post-magmatic ore-forming fluid was formed in the metallogenic period within a narrow distribution area in the upper and overlying surrounding rocks of the ore-forming granite rock mass. The latent explosion and hydraulic fracturing of ore-forming fluid instantly reduced the pressure of the ore-forming fluid, leading to the precipitation of ore-forming materials and the crystallization of valuable minerals, forming the tungsten deposits. The emplacement structure of the granite rock mass and the hydraulic fracturing structure of the ore-forming fluid are the sites of the tungsten ore body and control the development of tungsten ore body. The near EW(NWW)-trend of the mining area belongs to a concealed petro-controlling basement structure. This structure causes the long axis of the ore-forming granite rock mass to extend nearly EW and plays an indirect ore-controlling role. The NWW-trending faults such as F20 are neither the ore-conducting structures, nor the ore-controlling structures. They are ore-breaking, post-mineralization structures, with sinistral movement and normal shear sense. The NNE-trending concealed structure in the ore-field controls the distribution of the ore-forming magmatic rock belts and is a high-level petro-controlling structure. [Significance] This research can not only guide the exploration of the deeper and peripheral parts of the deposits—that is, further prospection should first search for concealed ore bodies at depth in the plunging part of the eastern and western ends of the near EW(NWW)-trending ore-forming granite rock body, and then search for other granites and fluid metallogenic systems in the area where the concealed ore-forming granite rock mass develops—but also has a demonstrative effect for studies of ore-controlling structures in similar deposits in southern China, enriching the theory of ore-controlling structures for high-temperature hydrothermal deposits.

  • Erwei QIAO, Xiumin MA, Hualin GUO, Yao Sun, Jingjie JIANG
    Journal of Geomechanics. 2025, 31(2): 197-210.
    Objective

    The Bohai Strait Cross-Sea Corridor is an important maritime traffic project which joins the Liaodong and the Shandong peninsulas. The state of geostress is an important reference for engineering design and construction decision-making.

    Method

    In order to better understand the present characteristics of the geostress and the distribution of the tectonic stress field in the southern section of the project, hydraulic fracturing tests were conducted for stress measurements at 0~300 m depth at Beigou Town, southwest Penglai District, Yantai City.

    Results

    The analysis of the measured data indicates that the in-situ stress field is controlled by horizontal tectonic stress in the study area, and the horizontal stress values are at an intermediate level compared with those obtained elsewhere in the Northeast−North China Stress Zone; SH (the maximum horizontal principal stress), Sh (the minimum horizontal principal stress), and Sv (the vertical principal stress) change linearly with the depth of the BGZ borehole; in the depth range of the measurements, the shallow surface stress of the crust is mainly reverse fault type, that is, the relationship of the three principal stresses is SH>Sh>Sv. The measured SH average azimuth angle in the borehole, N75.3°E, is in good agreement with the direction of the tectonic stress field of the North China Stress Zone to which the study area belongs; and, it is basically consistent with the direction of the regional tectonic stress field revealed by the focal source mechanism solution and GPS measurement. The Coulomb friction sliding criterion and the measured data are used to preliminarily evaluate the current level of geostress accumulation in the study area and its impact on the engineering stability. It is believed that the overall level of stress accumulation in the region is relatively low, and the crust in the engineering area is currently relatively stable. In addition, based on the comprehensive discrimination criterion of rock burst danger, $\sigma_{{\text{θ}}_{\max}} $/Rc, the possibility of rock burst in the underground tunnel of the Bohai Strait Cross-Sea Corridor is discussed.

    Conclusion

    It is primarily concluded that there is currently no possibility of rock burst in the underground tunnel of the Bohai Strait Cross-Sea Corridor, and the rock surrounding the tunnel is stable.

    Significance

    The findings in this paper provide a scientific basis for the optimization of the design and the construction of the Bohai Strait Cross-Sea Corridor. The study also provides basic data for research on active faults, seismogeology, regional dynamics in the survey area, and others.

  • Bo ZHANG, Aiguo WANG, Yunsheng YAO, Xiaolong HE, Saisai YAO, Junwen ZHU, Yimeng CAI
    Journal of Geomechanics. 2025, 31(2): 211-222.
    Objective

    Seismic fissures, landslides and mudflows are common secondary hazards of earthquakes. Following the occurrence of moderately strong earthquakes, detailed investigations of landslides and mudflows are usually conducted, but earthquake-induced fissures often receive less attention, because the characteristics and causes of earthquake-induced fissures are controlled by a combination of factors. The 2023 MS6.2 Jishishan Earthquake formed an extensive and dense earthquake-induced fissure zone in the Jishishan Mountain front and the interior of the Linxia Basin, but there are large differences in the understanding of the genetic mechanisms of earthquake-induced fissures.

    Methods

    In order to better understand the characteristics and genetic mechanisms of earthquake-induced fissures in the Jishishan Mountains, 246 fissures were systematically investigated by field observation, statistical analysis, and drone photogrammetry; then, the distribution, characteristics and genetic mechanisms of the earthquake-induced fissures were analyzed. Combined with relevant published studies, the following new findings are made.

    Results

    First, the 2023 MS6.2 Jishishan Earthquake formed a large number of fissures in the VII-VIII degree zone, which can be generally divided into two categories: tectonic-related fissures and non-tectonic fissures, and the non-tectonic fissures are further divided into ridge gravity fissures, landslide-related fissures, and valley fissure-sand liquefaction combinations on the basis of the topography associated with these fissures. Second, the tectonic-related fissures developed along the eastern margin fault of the Jishishan Mountains, with fissure widths at the cm-mm level. The tectonic-related fissures extend through fault planes, joints, and other weaknesses of the Jishishan fault zone, clearly showing that the more than 100 m wide fracture zone (i.e., weak zone in the upper crust) of the eastern margin fault of the Jishishan Mountains dominates the distribution of the earthquake-induced fissures. Meanwhile, the tectonic-related fissures tend to develop at weaknesses in man-made structures, such as road seams and bridge joints; this “weakening-preferred” behavior indicates that these fissures are generated by seismic shaking effects on the fracture zone along the fault, rather than direct rupture by the earthquake-causing fault. Thus, the tectonic micro-fissures are not the surface ruptures mentioned above. Third, the non-tectonic fissures mainly developed in the loess-covered area around the Dahejia-Kexinmin-Ganhetan villages north of the epicenter, where the topography is hilly, predominantly tableland and valleys; ridge (tableland) gravity fissures are large in scale, extend far along the ridge, and exhibit a combination of reticulation, parallelism, or en echelon style; landslide-related fissures on the slopes are comparatively smaller in scale and confined to the landslide area; valley fissures are comparable in scale to tectonic micro-fissures and generally formed in association with sand liquefaction; the fissure widths decrease from dm scale on the ridges (tableland) to mm scale in the valleys. Fourth, the tectonic-related micro-fissures healed naturally within approximately half a year, while the healing of the ridge gravity fissures lasted much longer; some landslide-related fissures may take a long time to heal naturally and may even form permanent displacements that pose a serious threat to people and require repair.

    Conclusion

    By reviewing and analyzing the distribution, types, and genetic mechanisms of earthquake-induced fissures in the 2023 MS6.2 Jishishan Earthquake, and taking into account the magnitude, the epicenter depth, and minor surface displacements, it is speculated that no surface ruptures formed during the Jishishan Earthquake. [Significance] An overview of the earthquake-induced fissures of the Jishishan Earthquake is of great significance for understanding the causal mechanisms of secondary earthquake disasters, analyzing seismotectonics, and proposing disaster mitigation strategies.