收藏切换
The influence of weak layers on thrust structure deformation: A finite element numerical simulation study
收藏切换
Jia MA1, Dengfa HE1, *, Guo LU1, Weikang ZHANG1, Hanyu HUANG2, Chiyue LIU1
Journal of Geomechanics | 2025, 31(3) : 444 - 457
Less
收藏切换
Journal of Geomechanics | 2025, 31(3): 444-457
• Crustal Stress & Tectonic Stress Field •
The influence of weak layers on thrust structure deformation: A finite element numerical simulation study
Full
Jia MA1, Dengfa HE1, *, Guo LU1, Weikang ZHANG1, Hanyu HUANG2, Chiyue LIU1
Affiliations
  • 1School of Energy Resources, China University of Geosciences (Beijing), Beijing 100083, China
  • 2Institute of Sedimentary Geology, Chengdu University of Technology, Chengdu 610059, Sichuan, China
Published: 2025-06-28 doi: 10.12090/j.issn.1006-6616.2024126
Outline
收藏切换
Objective

As ubiquitous critical structural units in sedimentary basins, weak layers are characterized by low shear strength, low Young’s modulus, and pronounced plastic rheological behavior, playing a key role in stress accommodation and strain partitioning during tectonic deformation. Seismic reflection profiles from areas such as Liangcun, Jiaoshiba, and Changning in southeastern Sichuan reveal widespread regional weak layers within sequences overlying deep thrust fault systems.

Methods

To investigate the dynamic control mechanism of weak layers on thrust deformation, a typical bend fault was selected as the pre-existing fault structure, and comparative experiments with/without weak layers were designed. Finite element modeling was employed to conduct numerical simulations under lateral compression. A comparative analysis of the simulation results from the two model sets systematically examines how weak layers control structural deformation during tectonic movement, particularly the influence of weak layer thickness on upper and lower structural deformation.

Results

(1) The weak layer-free model demonstrates that, under lateral compression, the overlying strata undergo thrust-parallel slip and fold deformation along the pre-existing bend fault. The deformation exhibits remarkable coherence among strata, with no observable interlayer slip or stratified differential deformation. Meanwhile, the maximum principal stress field displays characteristic tectonic stress zoning, while plastic strain concentrates on both the forelimb and the backlimb with upward-decreasing intensity. (2) The weak layer-bearing model reveals that, under combined lateral compression and underlying structural uplift, the weak layer experiences plastic flow, manifesting as top-thinning and limb-thickening. This results in stratified deformation patterns bounded by the weak layer. Furthermore, the distribution of maximum principal stress and plastic strain shows distinct stressen–strain decoupling across the weak layer interface.

Conclusion

(1) The weak layer constitutes a critical factor in initiating structural stratification. Under lateral compression conditions, the weak layer undergoes plastic flow accompanied by localized thickening and thinning. It significantly accommodates underlying structural deformation and stress-strain, thereby generating differential deformation across the weak layer interface and producing distinct stress-strain decoupling between the upper and lower structural domains. (2) The thickness of weak layers constitutes a critical parameter controlling deformation styles. Thicker weak layers result in longer wavelengths and gentler limb dips with reduced uplift amplitudes for overlying folds; they also produce shorter wavelengths, steeper limb dips and greater uplift amplitudes for underlying folds, thereby enhancing deformation partitioning. Conversely, thinner weak layers lead to more coherent deformation between the upper and lower structural domains. [Significance] The research findings regarding the influence of weak layers on thrust structural deformation revealed in this study can provide valuable references for structural deformation analysis and dynamic modeling in regions with similar stratigraphic characteristics, such as the Liangcun area, the Jiaoshiba block, and the Changning region in southeastern Sichuan.

weak layers  /  southeastern Sichuan region  /  thrust fault  /  tectonic deformation  /  finite element numerical simulation
马佳, 何登发, 鲁国, 张伟康, 黄涵宇, 刘驰悦. 软弱层对逆冲构造变形的影响:有限元数值模拟研究. 地质力学学报, 2025 , 31 (3) : 444 -457 . DOI: 10.12090/j.issn.1006-6616.2024126
Jia MA, Dengfa HE, Guo LU, Weikang ZHANG, Hanyu HUANG, Chiyue LIU. The influence of weak layers on thrust structure deformation: A finite element numerical simulation study[J]. Journal of Geomechanics, 2025 , 31 (3) : 444 -457 . DOI: 10.12090/j.issn.1006-6616.2024126
  • This research is financially supported by the Key Program of the National Natural Science Foundation of China (Grant No. 42330810).
Year 2025 volume 31 Issue 3
69
34
Cite this Article
BibTeX
Article Info
doi: 10.12090/j.issn.1006-6616.2024126
  • Receive Date:2024-11-19
  • Online Date:2026-11-13
  • Published:2025-06-28
Article Data
Affiliations
History
  • Received:2024-11-19
  • Revised:2025-04-22
  • Accepted:2025-04-27
Funding
This research is financially supported by the Key Program of the National Natural Science Foundation of China (Grant No. 42330810).
Affiliations
    1School of Energy Resources, China University of Geosciences (Beijing), Beijing 100083, China
    2Institute of Sedimentary Geology, Chengdu University of Technology, Chengdu 610059, Sichuan, China
References
Share
https://castjournals.cast.org.cn/joweb/dzlxxb/EN/10.12090/j.issn.1006-6616.2024126
Share to
QR

Scan QR to access full text

Cite this article
BibTeX
Citations
表12种不同金属材料的力学参数
科
Family
属数
Number of
genus
种数
Number of
species
占总种数比例
Percentage of
total species (%)
属
Genus
种数
Number of
species
占总种数比例
Percentage of total
species (%)
鹅膏菌科Amanitaceae 2 11 5.26 鹅膏菌属 Amanita 10 4.78
小菇科 Mycenaceae 2 12 5.74 丝盖伞属 Inocybe 5 2.39
多孔菌科 Polyporaceae 8 14 6.70 蜡蘑属 Laccaria 5 2.39
红菇科 Russulaceae 3 23 11.00 小皮伞属 Marasmius 6 2.87
小菇属 Mycena 11 5.26
光柄菇属 Pluteus 5 2.39
红菇属 Russula 17 8.13
栓菌属 Trametes 5 2.39
关闭全屏
  • BibTeX
  • EndNote
  • RefWorks
  • TxT