Home Latest Articles
Latest Articles
  • Yuanjian ZHOU, Guangliang GAO, Hao ZHANG, Cong LI, Chaofeng LI, Nan LI, Yu YANG, Zhibin YANG, Caiyun HU, Dongsheng SUN, Chongyuan ZHANG, Lei LI
    Journal of Geomechanics. 2025, 31(4): 673-689.
    Objective

    Underground gas storage (UGS) systems are critical for ensuring the flexibility, reliability, and safety of natural gas supply. Microseismic monitoring has emerged as a key technology for assessing the integrity of caprock seals and evaluating dynamic geomechanical responses during gas injection and withdrawal operations. This study aims to systematically summarize the technical framework, implementation practices, and engineering benefits of microseismic monitoring in UGS applications.

    Methods

    The study integrates technical principles and field experiences from a range of UGS types, including depleted reservoirs, aquifers, and salt caverns. Monitoring approaches are categorized into surface, shallow-borehole, and deep-borehole networks. Key procedures including signal preprocessing, phase picking, event detection, location methods (arrival-time based and waveform stacking), and mechanism analysis are reviewed. Case studies from China (e.g., Hutubi, Tangshan M, and Jintan UGS) and Europe (e.g., Minerbio, Stenlille, Castor) are analyzed to demonstrate the effectiveness of microseismic monitoring under varying geological conditions.

    Results

    Quantitative findings from multiple UGS sites indicate that microseismic events typically range from ML −3.0 to 2.0, reflecting subtle stress perturbations. For instance, 229 events were recorded at the Hutubi UGS, exhibiting scattered distributions away from major faults and indicating effective caprock sealing. At the Jintan salt cavern UGS, 419 events within 23 days revealed dense clustering near cavern boundaries, enabling real-time evaluation of cavern stability. At the Tangshan M oilfield-based UGS, limited events were detected despite pressures exceeding 30 MPa, with analysis revealing insufficient sensitivity of surface and shallow monitoring arrays for 4-km-deep reservoirs. Comparative analysis of injection parameters and microseismicity demonstrated a stronger correlation with pressure variation than with injection volume. Additionally, the Castor UGS failure case in Spain, where delayed detection of fault reactivation led to M 4+ earthquakes and project termination, highlights the consequences of inadequate real-time monitoring.

    Conclusion

    Microseismic monitoring enables real-time assessment of stress evolution and caprock integrity, supporting risk mitigation and operational optimization throughout the UGS lifecycle. Gas and oil reservoir-type UGSs prioritize deep fault reactivation monitoring, while salt cavern UGSs focus on cavern wall deformation. Deep borehole sensors and dense arrays are essential for improving detection thresholds and depth accuracy. Future advancements should integrate fiber-optic sensing, machine learning algorithms, real-time data streaming, and interdisciplinary modeling to enhance early warning capability and ensure long-term operational safety of UGS systems.

  • Peiyuan GU, Yongkui WAN, Zeyao SONG, Runyan WANG, Zhaoxuan GUAN
    Journal of Geomechanics. 2025, 31(4): 690-703.
    Objective

    To determine the rupture mode of the MS 7.3 earthquake in Hualien, Taiwan, China on April 3, 2024 and its triggering effect on subsequent seismic events in the surrounding area, the co-seismic displacement field and the induced areal strain response were analyzed by inverting the geometric structure and sliding characteristics of the seismogenic fault. The static Coulomb Failure Stress (CFS) triggering effect of the main earthquake event on the two MS 6.2 and MS 6.3 earthquakes that occurred on April 23, 2024 was evaluated to clarify the promoting effect of this earthquake on the seismic activity and its influence on the stress field of the adjacent area.

    Methods

    The two possible seismogenic nodes of the main earthquake and its subsequent earthquakes are determined by using the method of "focal mechanism solution". Based on the homogeneous elastic half-space theoretical model, the co-seismic displacement field and areal strain field under seismic action are established. The co-seismic displacement field results of the vertical fault direction of the main shock are analyzed and its sliding characteristics are determined. The CFS variation of the main shock in subsequent seismic events is calculated and its promoting effect on subsequent earthquakes is evaluated. The method of facet clustering is adopted to determine the seismogenic fault plane of the earthquake event. The stress field of the study area is projected onto the seismogenic fault plane and the causes of its occurrence are analyzed.

    Results

    A co-seismic displacement analysis of the April 3, 2024 MS 7.3 Hualien earthquake in eastern Taiwan reveals distinct patterns in both horizontal and vertical displacement fields, consistent with a reverse fault mechanism. Based on the focal mechanism solution, this seismic event is identified as a typical reverse fault earthquake, aligning with the tectonic compression between the Eurasian Plate and the Pacific Plate. The horizontal displacement field demonstrates a complex material flow pattern: substantial crustal materials converged towards the seismogenic fault along its southeastern and northwestern flanks, followed by outward migration in northeastern and southwestern directions. This kinematic pattern reflects the intense plate convergence where the Pacific Plate subducts westward beneath the Eurasian Plate along the eastern margin of Taiwan Island. Vertical displacement measurements show significant differential movement across the fault. The southeastern block (upper plate) experienced remarkable uplift reaching 48.4 cm, while the northwestern block (lower plate) underwent subsidence of up to 11.4 cm. This vertical displacement configuration, characteristic of thrust faulting, is further confirmed by cross-sectional observations perpendicular to the fault strike. The interface between the upper and lower plates exhibits sharp kinematic contrasts, with the upper plate displaying predominant upward motion components and the lower plate showing downward movements. Along-strike displacement reached approximately 22 cm, significantly exceeding the maximum perpendicular displacement of ~5 cm; this indicates thrust-dominated rupture with minor strike-slip components. The strain field distribution corresponds to a compressive belt parallel to the fault trace near the epicenter, flanked by extensional zones to the immediate east and west. Stress field analysis reveals significant shear stress concentrations (relative shear stress >0.7) and negative normal stresses on the fault planes of three major earthquakes in the sequence, consistent with the compressional regime generated by plate convergence. The westward subduction of the Pacific Plate beneath Taiwan Island creates optimal conditions for thrust faulting along the Longitudinal Valley Fault system, where accumulated shear stress ultimately exceeds the fault strength threshold. Notably, the Coulomb Failure Stress (CFS) calculations demonstrate that the April 3 mainshock significantly promoted subsequent seismic activity. The April 23 MS 6.3 and MS 6.2 events occurred in regions where the calculated CFS changes reached 0.020 MPa and 0.3 MPa, respectively, both exceeding the 0.01 MPa threshold for earthquake triggering. This earthquake sequence represents a normal release process of accumulated tectonic stress in the plate convergence zone. The spatial-temporal evolution of co-seismic deformation, strain redistribution, and stress interactions fully aligns with the regional tectonic framework dominated by the ongoing collision between the Eurasian and Pacific Plates.

    Conclusion

    Research shows that the MS 7.3 earthquake in Hualien, Taiwan, was caused by thrust faults. This earthquake event, along with the two subsequent MS 6.2 and MS 6.3 earthquake events that occurred on April 23, 2024, were all normal releases of local stress accumulation. Moreover, the CFS generated by the MS 7.3 earthquake in Hualien, Taiwan, has a significant impact on the surrounding seismic activities and has an obvious promoting effect on the occurrence of the subsequent two earthquakes. [Significance] This study not only evaluates the impact of the MS 7.3 earthquake in Hualien, Taiwan, on subsequent earthquakes, but also provides a fundamental dataset for geodynamic studies in the region. Strengthening the capacity of earthquake monitoring and forecasting and disaster mitigation promotes the formulation of relevant policies and safeguards people's lives and properties.

  • Yaning GAO, Shaohua ZHANG, Miao YU, Qiyu GAO, Haiyang GUO, Long ZHANG
    Journal of Geomechanics. 2025, 31(4): 704-719.
    Objective

    The Benxi Formation in the East Yanchuan Block of the southeastern Ordos Basin has emerged as a significant exploration target for tight gas reservoirs. Despite its strategic importance, the sandstone reservoirs in this interval are typically characterized by low porosity, poor permeability, strong heterogeneity, and complex diagenetic histories. These characteristics limit their development potential and make accurate reservoir prediction challenging. This study aims to thoroughly investigate the reservoir characteristics and diagenetic evolution of the Benxi Formation sandstones, with the goal of clarifying how multi-stage diagenetic processes control pore evolution and reservoir quality differentiation.

    Methods

    An integrated analytical approach was applied, including casting thin section petrography, scanning electron microscopy (SEM), and high-pressure mercury intrusion (HPMI). These techniques were used to examine pore types, mineral assemblages, diagenetic alterations, and pore-throat distributions, allowing for a detailed reconstruction of the diagenetic evolution and its influence on petrophysical properties.

    Results

    The study reveals: (1) The Benxi Formation sandstones have undergone a multi-stage diagenetic evolution involving three principal phases: mechanical compaction, cementation enhancement, and dissolution modification. Each stage had a distinct influence on the pore structure and reservoir performance. (2) Quartz-rich sandstones showed relatively high resistance to mechanical compaction but experienced substantial porosity loss during the middle diagenetic stage due to the pervasive precipitation of quartz and carbonate cements. This stage led to the formation of a rigid framework, where the intergranular pores were severely occluded, significantly reducing effective porosity and permeability. (3) Lithic quartz sandstones exhibited a much more favorable diagenetic trajectory. These rocks experienced strong dissolution of unstable components, such as feldspar and lithic fragments, resulting in the formation of secondary intragranular and intergranular pores. This process markedly improved pore connectivity and storage capacity, making this lithofacies the most favorable for tight gas accumulation. (4) Lithic sandstones suffered from intense early-stage compaction and cementation, which drastically reduced both primary and secondary porosity. As a result, these rocks exhibit extremely poor reservoir quality and are considered the least favorable reservoir type. (5) Based on the observed differences in diagenetic intensity and pore evolution characteristics, four distinct diagenetic facies types were identified.

    Conclusion

    (1) The reservoir quality of the Benxi Formation sandstones is primarily controlled by the intensity and sequence of compaction, cementation, and dissolution. (2) Different mineral compositions lead to divergent diagenetic pathways and contrasting pore evolution patterns. (3) Lithic quartz sandstones hold the highest potential due to extensive dissolution, while quartz sandstones are more susceptible to cementation. (4) Lithic sandstones, dominated by early-stage densification, represent poor-quality reservoirs. (5) The proposed four-type diagenetic facies framework effectively reflects the reservoir heterogeneity and offers practical criteria for facies-based reservoir prediction. [Significance] This study advances the understanding of diagenetic control on pore structure in tight sandstone reservoirs and provides a robust geological foundation for classifying and predicting reservoirs and targeting sweet spots in future exploration efforts.

  • Lei LI, Zhenkui GU, Hui FAN, Chuangchuang YAO, Xin YAO, Renjiang LI, Shu JIANG, Fuchu DAI
    Journal of Geomechanics. 2025, 31(4): 720-739.
    Objective

    Slope instability triggered by reservoir water-level fluctuations represents a prevalent geohazard in mountainous regions and canyons undergoing large-scale hydropower development. Since the 21st century, accelerated hydropower development has necessitated enhanced methodologies for identifying such specific-type geohazard potentials. In recent years, InSAR observations have largely addressed the challenge of identifying large-scale, multi-target deformation; however, due to limitations in real-time monitoring capabilities, this technique cannot detect latent hazards that have not yet manifested as deformations. Therefore, there is an urgent need to establish geomorphic signatures of reservoir-induced slope failures to improve hazard identification specificity. The large-scale impoundment of the Baihetan Reservoir since 2021 has triggered a series of slope instabilities, providing an exceptional opportunity to define the geomorphic signatures.

    Methods

    We integrated InSAR observations, geomorphic parameters, and optical imagery. Specifically, we utilize 228 ascending and 234 descending Sentinel-1A datasets (2020–2023) processed with DS-InSAR to identify deformed slopes triggered by reservoir water-level fluctuations.

    Results

    The results demonstrate the explanatory power of geomorphic parameters such as toe height, slope, aspect, and roughness in relation to disaster triggers. Furthermore, the analysis reveals correlations between lithological variations, slope structures, precipitation, and reservoir water-level fluctuations.

    Conclusion

    The strength of lithology, slope structure, and geomorphometric parameters in the Baihetan Reservoir area, along with their corresponding numerical ranges, form composite geomorphic signatures that can be used to identify hazards associated with reservoir water-level-induced slope instability early on. Additionally, we discovered that, beyond the effects of water-level fluctuations , precipitation events also play a significant role in triggering slope instability in the reservoir area, highlighting the importance of this factor as a driving force.

    Significance

    These insights significantly advance risk mitigation strategies for hydropower projects, facilitating optimal site selection and operation of hydropower stations, while providing a reference framework for assessing other slope instability mechanisms.

  • Junyi SUN, Zhaohua LUO, Jiawei CUI
    Journal of Geomechanics. 2025, 31(4): 740-754.
    Objective

    Previous studies have shown that many layered intrusions are formed by multiple pulsations of magma. However, little research has been done on whether the magma involved in the pulsation process comes from a single magma chamber or multiple magma chambers. Minerals, as products of magmatism, record the properties of magma chambers and deep magmatism.

    Methods

    Through the electron probe microanalysis technique (EPMA) on the hornblende and mica, combined with genetic analysis, mineral classification, and thermodynamic calculation, five different lithofacies zones of mafic layered intrusions in the western Sichuan LaLa mining area were studied.

    Results

    It shows that hornblende and mica of five different facies lithofacies zones formed in different stages of magmatism, with changes in the property of the magma chamber during crystallization.

    Conclusion

    There were at least two magma chambers with different properties in the deep layers during the formation of mafic layered intrusions. The layered intrusions were formed through multiple (4–5) magmatic pulsations, activated by fluid overpressure, which mobilized two magma chambers of differing compositions and depths.

  • Liwen GONG, Huai ZHANG, Lijuan CHEN, Zanjun WANG, Bingnuo ZHANG, Yixing SUN, Changyun BAI
    Journal of Geomechanics. 2025, 31(3): 345-360.
    Objective

    As the largest historical seismic event in the Chongqing region, the Xiaonanhai Earthquake holds significant scientific value for deciphering seismogenic parameters to inform regional seismic hazard assessment and anti-seismic fortification standards. This study addresses the critical challenge of scarce observational data in historical earthquake research.

    Methods

    A novel methodology for inverting seismic parameters through characteristic earthquake relics has been developed, systematically reconstructing the historical seismic parameters of the Xiaonanhai Earthquake. The interpretation of high-precision remote sensing and field investigations of seismically induced geo-hazards reveal a dominant near-N–S spatial distribution of the landslide clusters triggered by the Xiaonanhai Earthquake, consistent with the elliptical major axis direction of historically documented felt areas.

    Results

    This spatial congruence suggests that the NNW-striking Yangtoushan Fault is the seismogenic fault. Detailed remote sensing analyses of landslide orientations, sliding directions, and deposit distributions demonstrate, for the first time, coherent SE-directed motion features across multiple landslide masses, indicating a southeastward coseismic rupture propagation. A comparative analysis of the spatial correlation between geo-hazards and seismogenic structures observed in the Ludian Earthquake, coupled with seismotectonic mechanisms in southeastern Chongqing, further validates the rationality of the derived seismic parameters.

    Conclusion

    This study innovatively identifies a "karst–tectonic" composite mechanism: Under persistent NW–SE tectonic stress, bead-like karst caves developed along the fault zone or dominant joint directions form natural weakening zones, inducing stress concentration and ultimately triggering left-lateral strike-slip motion with thrust components. This dual mechanism explains the unique seismic characteristics blending tectonic rupture and karst collapse. [Significance] The proposed "geo-morphodynamic inversion" methodology advances the reconstruction of historical earthquake parameters and provides critical insights for the evaluation of seismic risk in karst terrains.

  • Yilin ZHAO, Yujun SUN, Guiting HOU, Wei SHI
    Journal of Geomechanics. 2025, 31(3): 361-385.
    Objective

    The arcuate tectonic belt in the northeastern Tibetan Plateau is a unique boundary for the lateral growth of the Tibetan Plateau. Characterized by an arcuate geomorphology with alternating basins and mountains perpendicular to the direction of plateau expansion, it represents a unique growth mode of the Tibetan Plateau. This study aims to reproduce the formation and evolution process of the arcuate tectonic belt in the northeastern Tibetan Plateau using three-dimensional finite element visco-plastic large deformation numerical simulation. It also proposes a new structural pattern and deformation mechanism for the outward growth of the arcuate tectonic belt.

    Methods

    Three tests based on a large amount of geological and geophysical data were conducted to investigate how the barrier of the Yinchuan Basin and the weak lower crust control the development of faults within the arcuate tectonic belt.

    Results

    The results show that, as the Tibetan Plateau expanded northeastward, the shortening and thickening of the crust propagated from the plateau to the northeast. Under NE–SW compression, the deep-seated materials in the Mesozoic and Cenozoic basins (arcuate tectonic belts), which were confined by blocks, migrated northeastward. After being blocked by the rigid Ordos and Alxa blocks, these materials were squeezed into the relatively weak Yinchuan Basin to a limited extent. The obstruction by the Yinchuan Basin is an important condition for the formation and development of the faults within the shallow crust of the arcuate tectonic belt. A weak lower crust with a viscosity of 2.5×1022 Pa·s and a cohesion of 2 MPa promotes fault development within the arcuate tectonic belt, but it is not a necessary prerequisite for fault formation. This paper analyzes the distribution of the maximum shear strain rate on the surface and along three sections of the arcuate tectonic belt as well as the evolution of these characteristics over time. It is proposed that the arcuate tectonic belt generally exhibits a "ramp-thrusting" structural pattern in the deeper sections, and the deformation mechanism is characterized by deep–shallow decoupling. The deformation of the lithosphere within the arcuate tectonic belt decoupled at depths of 20 km and 40 km, forming three tectonic layers. The middle–upper crust is dominated by thrust and fold structures, regulating the horizontal shortening and vertical thickening of the crust; the weak lower crust completes the horizontal shortening and vertical thickening of the crust through ductile–plastic deformation and serves as a detachment layer for the development of arcuate structures; the lithospheric mantle, due to the regulating effect of the Moho surface, underwent limited shortening and thickening.

    Conclusion

    Under the control of the preexisting fault zones in the southern and northern margins and the detachment zones, the main arcuate faults developed synchronously during the period of 9.5–2.5 Ma. Then, they extended in depth and finally cut into the middle crust. [Significance] This study deepens the understanding of the uplift and lateral growth of the Tibetan Plateau, and provides a reference for the study of the deep–shallow processes involved in arcuate structure formation.

  • Kecheng YU, Shengsi SUN, Yunpeng DONG, Bo HUI, Chao CHENG, Bin ZHANG, Yining ZHANG, Xinyu LI
    Journal of Geomechanics. 2025, 31(3): 386-410.
    Objective

    A typical granulite–migmatite–gneiss dome developed in the Foping area of the central Qinling orogenic belt. This area is key to studying the metamorphic deformation of continental crust and the Mesozoic tectonic evolution of Qinling. The Yangtianba–Shimudi ductile shear zone along the dome's southern margin records information on middle–deep structural deformation during the late Triassic compressional–extensional transition, offering crucial constraints on the exhumation mechanism of the Foping dome.

    Methods

    A detailed investigation of representative metamorphic and deformed rock samples from the shear zone was conducted using structural analysis, mineral geochemistry, crystallographic preferred orientation (CPO), and geochronology. Field observations and kinematic vorticity analysis show that this shear zone developed under right-lateral ductile shear deformation controlled by pure shear.

    Results

    In the felsic mylonite, quartz primarily shows prism <a> and prism <c> slip systems, suggesting deformation occurred under amphibolite facies conditions at approximately 550–650 °C. The characteristics of the metamorphic mineral assemblages and the results of garnet–biotite–plagioclase thermobarometry indicate a clockwise P–T path, with peak metamorphic conditions of 568–611 °C/5.2–5.3 kbar and 630–654 °C/7.1–7.9 kbar. The isothermal decompression stage M2 recorded conditions of 590–616 °C/3.5–4.5 kbar. Zircon U–Pb dating of the leucosomes in the migmatites within the shear zone yielded an age of 180.8 ± 3.8 Ma, representing the lower limit of the ductile shear deformation.

    Conclusion

    Integrated with regional geological data, the metamorphic and deformational evolution of the study area can be reconstructed as follows: Prior to ~210 Ma, the central segment of the South Qinling tectonic belt was dominated by collisional orogenesis, leading to crustal thickening and the development of progressive metamorphism (M1) in the Foping area. During 210–200 Ma, the Foping region transitioned into post-collisional extension. This transitional phase was characterized by a bidirectional stress regime combining horizontal shortening and vertical collapse, which triggered ductile shear deformation (D1) in the Yangtianba-Shimudi area and initiated the isothermal decompression metamorphic event (M2). The region entered a phase of post-collisional extension at about 180 million years. Continued extension resulted in the formation of partial melts in the northern part of the study area. During the subsequent exhumation of the ductile shear zone, the mylonitic foliation was reformed by late fold deformation. [Significance] The findings provide a reference for discussing the detailed process of metamorphic deformation response in the process of Late Triassic–Early Jurassic tectonic transformation in the south of Foping dome.

  • Lijun ZHANG, Daoyang YUAN, Hongqiang LI, Qi SU, Ruihuan SU, Yanwen CHEN, Yameng WEN
    Journal of Geomechanics. 2025, 31(3): 411-426.
    Objective

    The Lajishan–Jishishan orogenic belt represents a significant arc-shaped tectonic zone formed by northeastward compressional expansion along the northeastern margin of the Tibetan Plateau, jointly controlled by two compressional thrust fault zones: the North Lajishan Fault and the South Lajishan fault. Since the Late Cenozoic, intense tectonic activities in the Lajishan area have created a prominent basin–range coupled geomorphological pattern, making it an ideal region for investigating the geomorphic evolution and the tectonic dynamics through structural geomorphological approaches.

    Methods

    Based on a 30-m-resolution digital elevation model (DEM), this study employs the ArcGIS and MatLab platforms with plugin tools and open-source code packages to extract channel steepness indices (Ksn) from 105 medium- and small-sized rivers on the hanging wall of the North Lajishan Fault (including the East Jishishan Fault), along with hypsometric integrals (HI) from 54 watersheds along the fault zone.

    Results

    The Ksn distribution reveals an overall west-to-east increasing trend in uplift rates along the North Lajishan fault, with a notable low-value anomaly in its central segment. Statistical analysis of Ksn demonstrates clear segmentation characteristics, indicating that the eastern section of northern Lajishan and the Jishishan section exhibit the highest uplift rate and strongest tectonic activity. HI spatial distribution patterns along the North Lajishan fault show multiple high-value zones within piedmont basins. Integrated with geological surveys and petroleum exploration profiles, these findings suggest that during the Late Quaternary, the North Lajishan fault has not only remained active but also propagated northeastward into the Xining–Minhe and Linxia basins, exhibiting thrust fault–fold deformation features.

    Conclusion

    (1) The tectonic geomorphological evolution of the North Lajishan Fault (including the eastern margin of Jishishan) is obviously different, and it tends to gradually become younger from west to east. The geomorphological evolution of the northern margin of Lajishan has discrete differences, which can be attributed to three sections: a western, a middle, and an eastern section, which includes the northern margin of Jishishan. Among them, the tectonic activity of the latter section is the latest and most intense, consistent with the long-term tectonic evolution. This confirms the rationality of the geomorphological parameter extraction results and is also a geomorphological response to the differential tectonic activity in this area. (2) The tectonic activity characteristics of the northern margin of Lajishan (including the eastern margin of Jishishan) adhere to the geomorphological evolution law and also have segmental differences. It is believed that the North Lajishan Fault (including the East Jishishan Fault) has strong tectonic activity from west to east. Specifically, the uplift rate of the western section of the northern margin of Lajishan is stable. The tectonic activity may be superimposed on the strike-slip component of the Riyueshan Fault in addition to the regional extrusion uplift, which was active in the Late Pleistocene and dominated by left-handed strike-slip and thrust. The middle section of the northern margin of Lajishan (NE-trending bulge section) has the lowest tectonic uplift rate, and the fault in this section is dominated by extrusion thrust with a late Pleistocene activity; it is little affected by the Riyueshan fault. The eastern section of the northern margin of the Lajishan-Jishishan section (the fault arc protrudes to the south-east turning section) has strong tectonic activity with Holocene fault activity; its nature is mainly thrust with dextral components. Significance In addition to its late Quaternary activity, the North Lajishan Fault (including the East Jishishan Fault) tends to expand and develop into the piedmont basin. Combined with the comprehensive interpretation of field geological surveys and oil exploration sections, it is believed that the fault extends to the interior of the Xining–Minhe Basin to form a reverse fault–fold belt. Its latest tectonic activity may have triggered more than 10 moderate–strong earthquakes. Attention should be paid to this tectonic activity and the related seismicity in those basin.

  • Zebang CHEN, Long YUN, Ju WANG, Xiao TIAN
    Journal of Geomechanics. 2025, 31(3): 427-443.
    Objective

    In structural geology, faults and their damage zones are fundamental structural units that hold significant research and engineering value. They can be usde to reveal the evolution laws of regional structures and the evolution characteristics of fault structures, to indicate the migration paths of underground fluids, and to evaluate the stability of major engineering rock masses. However, traditional research methods often rely on manual recording to obtain information on fractures and surrounding joint structures, which suffer from inefficiency and susceptibility to limitations imposed by complex terrain. The emerging unmanned aerial vehicle (UAV) aerial survey technology in recent years has effectively addresses the limitations of traditional methods. This method integrates data acquisition, terrain mapping, and dynamic monitoring. It generates high-resolution digital models and images that can more effectively reduce field workload, more intuitively display terrain features, and more conveniently extract structural information. This method can be applied more broadly to the field of structural geology and geological engineering, especially when studying faults and damage zones.

    Methods

    Based on an extensive literature review, we categorized and compared existing research in relation to different application scenarios.

    Results

    This study provides a detailed explanation of the basic principles of UAV aerial survey technology and the definition of fault damage zones and associated structures. It also enumerates widely used methods for identifying the extent of fault damage zones and characterizing structural features. Additionally, application scenarios of UAV aerial survey technology within fault damage zones are summarized.

    Conclusion

    Overall, UAV aerial survey technology has been widely applied in the study of faults and their damage zones, meeting various research needs. However, challenges remain in both the front-end (structural information acquisition) and back-end (structural information interpretation) processes, leaving ample room for future applications and advancements.