收藏切换
The outward growth of the arcuate tectonic belt in the northeastern Tibetan Plateau: Insights from three-dimensional finite element numerical simulations
收藏切换
Yilin ZHAO1, 2, 3, Yujun SUN1, 3, Guiting HOU2, *, Wei SHI1, 3
Journal of Geomechanics | 2025, 31(3) : 361 - 385
Less
收藏切换
Journal of Geomechanics | 2025, 31(3): 361-385
• Special Section Dedicated to the 30th Anniversary •
The outward growth of the arcuate tectonic belt in the northeastern Tibetan Plateau: Insights from three-dimensional finite element numerical simulations
Full
Yilin ZHAO1, 2, 3, Yujun SUN1, 3, Guiting HOU2, *, Wei SHI1, 3
Affiliations
  • 1Chinese Academy of Geological Sciences, Beijing 100037, China
  • 2School of Earth and Space Sciences, Peking University, Beijing 100871, China
  • 3SinoProbe Laboratory, Ministry of Natural Resources of China, Beijing 100094, China
Published: 2025-06-28 doi: 10.12090/j.issn.1006-6616.2025037
Outline
收藏切换
Objective

The arcuate tectonic belt in the northeastern Tibetan Plateau is a unique boundary for the lateral growth of the Tibetan Plateau. Characterized by an arcuate geomorphology with alternating basins and mountains perpendicular to the direction of plateau expansion, it represents a unique growth mode of the Tibetan Plateau. This study aims to reproduce the formation and evolution process of the arcuate tectonic belt in the northeastern Tibetan Plateau using three-dimensional finite element visco-plastic large deformation numerical simulation. It also proposes a new structural pattern and deformation mechanism for the outward growth of the arcuate tectonic belt.

Methods

Three tests based on a large amount of geological and geophysical data were conducted to investigate how the barrier of the Yinchuan Basin and the weak lower crust control the development of faults within the arcuate tectonic belt.

Results

The results show that, as the Tibetan Plateau expanded northeastward, the shortening and thickening of the crust propagated from the plateau to the northeast. Under NE–SW compression, the deep-seated materials in the Mesozoic and Cenozoic basins (arcuate tectonic belts), which were confined by blocks, migrated northeastward. After being blocked by the rigid Ordos and Alxa blocks, these materials were squeezed into the relatively weak Yinchuan Basin to a limited extent. The obstruction by the Yinchuan Basin is an important condition for the formation and development of the faults within the shallow crust of the arcuate tectonic belt. A weak lower crust with a viscosity of 2.5×1022 Pa·s and a cohesion of 2 MPa promotes fault development within the arcuate tectonic belt, but it is not a necessary prerequisite for fault formation. This paper analyzes the distribution of the maximum shear strain rate on the surface and along three sections of the arcuate tectonic belt as well as the evolution of these characteristics over time. It is proposed that the arcuate tectonic belt generally exhibits a "ramp-thrusting" structural pattern in the deeper sections, and the deformation mechanism is characterized by deep–shallow decoupling. The deformation of the lithosphere within the arcuate tectonic belt decoupled at depths of 20 km and 40 km, forming three tectonic layers. The middle–upper crust is dominated by thrust and fold structures, regulating the horizontal shortening and vertical thickening of the crust; the weak lower crust completes the horizontal shortening and vertical thickening of the crust through ductile–plastic deformation and serves as a detachment layer for the development of arcuate structures; the lithospheric mantle, due to the regulating effect of the Moho surface, underwent limited shortening and thickening.

Conclusion

Under the control of the preexisting fault zones in the southern and northern margins and the detachment zones, the main arcuate faults developed synchronously during the period of 9.5–2.5 Ma. Then, they extended in depth and finally cut into the middle crust. [Significance] This study deepens the understanding of the uplift and lateral growth of the Tibetan Plateau, and provides a reference for the study of the deep–shallow processes involved in arcuate structure formation.

northeastern Tibetan Plateau  /  arcuate tectonic belt  /  Cenozoic  /  formation mechanism  /  finite element numerical simulation
赵一霖, 孙玉军, 侯贵廷, 施炜. 青藏高原东北缘弧形构造生长:来自三维有限元数值模拟的启示. 地质力学学报, 2025 , 31 (3) : 361 -385 . DOI: 10.12090/j.issn.1006-6616.2025037
Yilin ZHAO, Yujun SUN, Guiting HOU, Wei SHI. The outward growth of the arcuate tectonic belt in the northeastern Tibetan Plateau: Insights from three-dimensional finite element numerical simulations[J]. Journal of Geomechanics, 2025 , 31 (3) : 361 -385 . DOI: 10.12090/j.issn.1006-6616.2025037
  • This research is financially supported by the National Science and Technology Major Project of China on Deep Earth Exploration (Grant No.2024ZD1001102) and the National Natural Science Foundation of China (Grant No.42472278).
Year 2025 volume 31 Issue 3
59
27
Cite this Article
BibTeX
Article Info
doi: 10.12090/j.issn.1006-6616.2025037
  • Receive Date:2025-04-05
  • Online Date:2026-11-13
  • Published:2025-06-28
Article Data
Affiliations
History
  • Received:2025-04-05
  • Revised:2025-05-09
  • Accepted:2025-05-12
Funding
This research is financially supported by the National Science and Technology Major Project of China on Deep Earth Exploration (Grant No.2024ZD1001102) and the National Natural Science Foundation of China (Grant No.42472278).
Affiliations
    1Chinese Academy of Geological Sciences, Beijing 100037, China
    2School of Earth and Space Sciences, Peking University, Beijing 100871, China
    3SinoProbe Laboratory, Ministry of Natural Resources of China, Beijing 100094, China
References
Share
https://castjournals.cast.org.cn/joweb/dzlxxb/EN/10.12090/j.issn.1006-6616.2025037
Share to
QR

Scan QR to access full text

Cite this article
BibTeX
Citations
表12种不同金属材料的力学参数
科
Family
属数
Number of
genus
种数
Number of
species
占总种数比例
Percentage of
total species (%)
属
Genus
种数
Number of
species
占总种数比例
Percentage of total
species (%)
鹅膏菌科Amanitaceae 2 11 5.26 鹅膏菌属 Amanita 10 4.78
小菇科 Mycenaceae 2 12 5.74 丝盖伞属 Inocybe 5 2.39
多孔菌科 Polyporaceae 8 14 6.70 蜡蘑属 Laccaria 5 2.39
红菇科 Russulaceae 3 23 11.00 小皮伞属 Marasmius 6 2.87
小菇属 Mycena 11 5.26
光柄菇属 Pluteus 5 2.39
红菇属 Russula 17 8.13
栓菌属 Trametes 5 2.39
关闭全屏
  • BibTeX
  • EndNote
  • RefWorks
  • TxT