收藏切换
Rapid generation and sharing of kilometer-grid strong motion time histories: A case study of the MS6.8 Dingri, Xizang earthquake on January 7, 2025
收藏切换
PDF
Yefei REN1, 2, Hongwei WANG1, 2, Hongqi DIAO1, 2, Ye LIU1, 2, Shengyin QIANG1, 2, Baofeng ZHOU1, 2, Ruizhi WEN1, 2
Earthquake Engineering and Engineering Dynamics | 2025, 45(1) : 1 - 11
Less
收藏切换
Earthquake Engineering and Engineering Dynamics | 2025, 45(1): 1-11
Rapid generation and sharing of kilometer-grid strong motion time histories: A case study of the MS6.8 Dingri, Xizang earthquake on January 7, 2025
Full
Yefei REN1, 2, Hongwei WANG1, 2, Hongqi DIAO1, 2, Ye LIU1, 2, Shengyin QIANG1, 2, Baofeng ZHOU1, 2, Ruizhi WEN1, 2
Affiliations
  • 1.Key Laboratory of Earthquake Engineering and Engineering Vibration, Institute of Engineering Mechanics, China Earthquake Administration, Harbin 150080, China
  • 2.Key Laboratory of Earthquake Disaster Mitigation, Ministry of Emergency Management, Harbin 150080, China
Published: 2025-02-28 doi: 10.13197/j.eeed.2025.0101
Outline
收藏切换

In response to the current inability of the strong-motion observation network to provide seismic input records covering all areas of the epicenter vicinity, a technical framework for the rapid generation of kilometer-grid strong motion time histories has been established. Taking the MS6.8 earthquake in Dingri, Xizang on January 7, 2025, as an example, the detailed processes of each technical procedure are described, and work on the inversion of the source rupture process, estimation of regional site conditions, and simulation of strong motion time histories has been carried out. The following results are obtained. The earthquake released a seismic moment of 4.7×1019 N•m, corresponding to a moment magnitude of 7.05. The fault slip is predominantly normal with a small amount of left-lateral strike-slip component, and the maximum slip displacement exceeded 3 meters. The rupture lasted for more than 20 seconds, mainly propagating in the northward direction, which may cause potential directivity effects. A VS30 distribution map and engineering site classification map with a resolution of 30 arcseconds are provided, and the sites in the vicinity of epicenter area are mainly classified as ClassⅠand ClassⅡ, with VS30 values ranging from 260 m/s to 510 m/s in the majority of the southeast area. Simulated three-component acceleration time histories for 14 996 virtual observation points in the near-field area (27°30′N~30°00′N、86°18′E~88°36′E) are provided, and the accuracy of the simulation results is verified by actual observation records. The maximum horizontal peak ground acceleration(PGA) can reach 1.0 g, and the 0.4 g and 0.2 g isolines approximately coincide with the IX and Ⅷ isoseismals, while the 0.10 g and 0.05 g isolines enclose areas slightly smaller than the Ⅶ and Ⅵ isoseismal zones. This research work and its results can provide reasonable seismic input for the damage identification, disaster evaluation, and resilience assessment of various disaster-bearing bodies in the epicentral area.

strong ground motion time history  /  Dingri earthquake  /  source rupture process  /  stochastic finite-fault simulation  /  regional site condition
Yefei REN, Hongwei WANG, Hongqi DIAO, Ye LIU, Shengyin QIANG, Baofeng ZHOU, Ruizhi WEN. Rapid generation and sharing of kilometer-grid strong motion time histories: A case study of the MS6.8 Dingri, Xizang earthquake on January 7, 2025[J]. Earthquake Engineering and Engineering Dynamics, 2025 , 45 (1) : 1 -11 . DOI: 10.13197/j.eeed.2025.0101
Year 2025 volume 45 Issue 1
PDF
99
50
Cite this Article
BibTeX
Article Info
doi: 10.13197/j.eeed.2025.0101
  • Receive Date:2025-01-16
  • Online Date:2026-03-20
  • Published:2025-02-28
Article Data
Affiliations
History
  • Received:2025-01-16
  • Revised:2025-01-22
Funding
Affiliations
    1.Key Laboratory of Earthquake Engineering and Engineering Vibration, Institute of Engineering Mechanics, China Earthquake Administration, Harbin 150080, China
    2.Key Laboratory of Earthquake Disaster Mitigation, Ministry of Emergency Management, Harbin 150080, China
References
Share
https://castjournals.cast.org.cn/joweb/dzgcygczd/EN/10.13197/j.eeed.2025.0101
Share to
QR

Scan QR to access full text

Cite this article
BibTeX
Citations
表12种不同金属材料的力学参数

Family
属数
Number of
genus
种数
Number of
species
占总种数比例
Percentage of
total species (%)

Genus
种数
Number of
species
占总种数比例
Percentage of total
species (%)
鹅膏菌科Amanitaceae 2 11 5.26 鹅膏菌属 Amanita 10 4.78
小菇科 Mycenaceae 2 12 5.74 丝盖伞属 Inocybe 5 2.39
多孔菌科 Polyporaceae 8 14 6.70 蜡蘑属 Laccaria 5 2.39
红菇科 Russulaceae 3 23 11.00 小皮伞属 Marasmius 6 2.87
小菇属 Mycena 11 5.26
光柄菇属 Pluteus 5 2.39
红菇属 Russula 17 8.13
栓菌属 Trametes 5 2.39
关闭全屏
  • BibTeX
  • EndNote
  • RefWorks
  • TxT