Journal of Chinese Society of Power Engineering. 2026, 46(1): 59-66,76.
In order to improve the atomization performance of the pressure swirl nozzle used for spray cooling and optimize the structural parameters of the nozzle, simulation analysis of the swirl nozzle based on the volume-of-fluid function (VOF) method was carried out, and orthogonal tests were used to analyze the significance of the influence of each parameter on the thickness of the liquid film and the spray angel of atomization, then the structural parameters of the nozzle were optimized. Results show that the outlet length L₁, outlet diameter D and the number of cyclone holes N have a more significant effect on the atomization performance of the nozzle, and the height of the cyclone chamber H has a smaller effect on the atomization performance. Increasing the nozzle outlet length L₁ can reduce the liquid film thickness and atomization spray angel; increasing the outlet diameter D can increase the liquid film thickness and atomization spray angel; increasing the number of cyclone holes N will make the liquid film become thicker and the atomization spray angel become smaller; increasing the height of the cyclone chamber H will make the liquid film thickness decrease firstly and then increase, and the atomization spray angel decrease. When the outlet length L₁ is 2 mm, the outlet diameter D is 10 mm, the height of the cyclone chamber H is 16 mm, and the number of cyclone holes N is 6, the atomization performance is optimal. Compared with the original model, the atomization spray angel of the optimized nozzle is increased by 16.8%, and its liquid film thickness is decreased by 32.4%.