Home Latest Articles
Latest Articles
  • Journal of Chinese Society of Power Engineering. 2026, 46(10): 115-123.
    For the under-construction 10 MW compressed air energy storage (CAES) demonstration system, the internal flow characteristics and energy consumption distribution features of the adjustable ejector were analyzed based on computational fluid dynamics simulation. An effective exhaust gas suction method was determined according to the actual operating conditions, and the effects of nozzle spacing, air storage tank operating pressure and needle process on the ejection performance of the adjustable ejector were investigated. Results show that under high back pressure conditions, the ejector can recover pressure energy by sucking exhaust gas through the central nozzle. The nozzle spacing may restrict the ejection performance by affecting the energy consumption of the internal flow field of the ejector. When the nozzle spacing is 22.5 mm, the maximum mass flow rate of the exhaust gas ejected into the turbine for work is 2.65 kg/s. Meanwhile, the ejection ratio of the adjustable ejector first increases and then decreases as the operating pressure reduces, and increases as the needle process decreases. When the operating pressure is 9.0 MPa, the maximum ejection ratio is 11.4%.
  • Journal of Chinese Society of Power Engineering. 2026, 46(10): 138-145.
    An improved recognition algorithm was constructed by deeply integrating multi-task convolutional neural network (MTCNN) detection module, octave convolution (OctConv) feature optimization module and FaceNet recognition module. OctConv was introduced to replace the traditional convolution of MTCNN, a loss function for keypoint regression was added to output network (O-Net), a frequency-domain dynamic weight allocation mechanism was introduced to enhance OctConv module, and the triplet loss function was added during FaceNet training phase. Meanwhile, a novel facial image dataset covering various typical thermal power plant scenarios was constructed. Experimental results show that the accuracy of the proposed optimized algorithm reaches 95.2%. It performs excellently in the high-temperature area of the boiler, with the recognition accuracy increased from 87.6% of traditional MTCNN algorithm to 97.2%, effectively solving the problem of feature degradation caused by the reflection of high-temperature equipment. The detection speed of this algorithm reaches 24.7 frames per second, which is superior to that of MTCNN (22.3 frames per second) and convolutional neural network (CNN)-long short-term memory (LSTM) network (18.5 frames per second). The optimized algorithm improves accuracy and real-time performance, reduces computing resource consumption, can effectively meet the safety management requirements in the complex environment of thermal power plants, and enhances the intelligent level of safety management in thermal power plants.
  • Journal of Chinese Society of Power Engineering. 2026, 46(10): 94-99,137.
    To simplify propane steam reforming process and reduce hydrogen production cost, a shell-and-tube heat exchanger reforming reactor model was constructed using COMSOL. The temperature and velocity of hot air at the reactor inlet were selected as operating parameters. Simulations were conducted to analyze their effects on propane steam reforming and to determine the optimal operating conditions. Results show that under rated conditions, a higher hot-air inlet temperature promotes more complete propane reforming. Propane is fully consumed when the inlet temperature reached 900 K. Increasing the hot-air inlet velocity also favors the forward steam reforming reaction. At inlet velocities of 1.25 m/s and 1.5 m/s, propane is completely converted, with hydrogen mass fractions reaching 0.099 in both cases. Considering both energy consumption and reaction efficiency, the optimal operating condition is 900 K and 1.25 m/s.
  • Journal of Chinese Society of Power Engineering. 2026, 46(10): 100-114.
    To enhance the regulation flexibility of thermal power units under the new power system, a full-process coupling scheme for frequency regulation of thermal power unit coupled with a molten salt system integrating a multi-heat-source thermal storage mode was designed. In this scheme, the multi-heat-source thermal storage mode of the electric-heating molten salt heat exchanger and extraction steam thermal storage was integrated, and a thermal release and utilization route based on molten salt heating the feedwater of the high-pressure heater was proposed. A dynamic model of the coupled system was established, and verification was carried out using actual data. Aiming at the full thermal storage and release process of the coupled system, a control strategy for the molten salt system coupled with thermal power units based on modal increment matching was proposed. Simulation results show that during load decrease process, under the mode of integrating multi-heat-source thermal storage, the system load stabilization time is shortened by 38.66% compared with the system without molten salt thermal storage, and the comprehensive ramping performance indicator is improved by 29.49% compared with the system with only extraction steam thermal storage. During load increase process, the proposed strategy based on power increment can effectively decouple the mutual influence between the thermal power unit and the molten salt thermal storage system. Compared with the high-pressure heater throttling scheme and the no-thermal-storage scheme, the comprehensive ramping performance indicator is increased by 15.01% and 21.18% respectively.
  • Journal of Chinese Society of Power Engineering. 2026, 46(10): 74-83.
    In order to solve the problems of low system efficiency and insufficient economy caused by the high dimensional volatility of environmental data during the configuration of off-grid wind-solar electrolysis hydrogen production system, an optimization study was conducted on the capacity of photovoltaic, wind turbine, and storage battery in typical scenarios. First, a mathematical model of key components including the electrolyzer life model was constructed. Subsequently, scenario generation technology was innovatively adopted to compress the annual environmental data into 12 typical scenarios to reduce the complexity of optimization. Meanwhile, the minimization of levelized hydrogen production cost was taken as the objective function, and the factors of electrolyzer life decay and economic value discount of hydrogen were considered. Based on this, a two-layer nested optimization framework was designed: the inner layer realized the optimal power allocation under each typical scenario based on dynamic programming, and the outer layer optimized the system capacity allocation by particle swarm algorithm. Finally, the environmental data of Basu area in Tibet was used as a scenario case to obtain the optimal configuration under the target hydrogen production capacity of 1 000 m3/h, which verified the superiority of the proposed strategy in terms of system optimization performance and economy.
  • ZHANG Jin, ZHOU Yuanyuan, SONG Bingbing, WU Xinzhuang, JIANG Xudong, HAN Xiaoqu
    Journal of Chinese Society of Power Engineering. 2026, 46(10): 37-43,73.
    To address the requirements for the long-distance transportation of nuclear steam supply from pressurized water reactors, three steam parameter improvement technologies were proposed, including electric heating, steam compression, and hybrid heating. Thermodynamic design and economic analysis were conducted for a 40 km steam transmission scenario. Results show that within the nuclear power plant, using an electric heater to reheat the steam to 290 ℃ can maintain a superheat degree of 12 K at the end of the steam pipeline, with the lowest cost increment per ton of steam at only 15.19 RMB. Installing two-stage steam compression in the heating network ensures superheated steam transportation, but the system equipment investment is high, increasing the cost by 29.34 RMB per ton. For the hybrid heating technology, mixing with 28% mass fraction of high-priced thermal power steam leads to a cost increase of 33.96 RMB per ton of externally supplied steam, accompanied by significant system fluctuations. Considering technical maturity, economic efficiency, and operational stability, the in-plant electric heating technology is the optimal solution for breaking through the bottlenecks in the long-distance transmission of nuclear steam supply.
  • Journal of Chinese Society of Power Engineering. 2026, 46(10): 44-51.
    Multiple sets of stress relaxation tests were conducted on ST460TS, ST12T and Stellite 6 alloys used in ultra-supercritical steam turbine valves, under different initial stresses and at the valve service temperature of 630 °C. The influence of initial stress on stress relaxation was investigated for various materials. The stress relaxation curves were fitted using a four-order exponential decay function, and a full-stress-range creep constitutive model based on stress relaxation was derived. Results show that ST460TS and ST12T exhibit similar characteristics under different stress levels. The entire stress relaxation process can be divided into three stages: rapid relaxation, transitional relaxation and progressive steady state. The four-order exponential decay function can accurately describe the stress relaxation process of ST460TS and ST12T, and predict the relaxation limit. Stellite 6 exhibits stepwise relaxation behavior under high initial stress due to its low plasticity, while it shows continuous decay relaxation under low initial stress.
  • LIU Yun, YANG Dajiang, ZENG Liang, KONG Yuhan, LI Yonghua
    Journal of Chinese Society of Power Engineering. 2026, 46(10): 62-73.
    A novel bionic leaf vein reaction channel structure was constructed, and further investigated the effects of leaf vein bending amplitude and branching angle on the performance of fuel cell. Results show that the bionic leaf vein reaction channel can significantly enhance the performance of fuel cell, and increasing the bending amplitude substantially improves the reaction performance and electrical output performance of the fuel cell. The enhancement of the branching angle is dependent on the bending amplitude, i.e. slightly increasing the bending angle can improve performance, but increasing it significantly produces an inhibitory effect.
  • Journal of Chinese Society of Power Engineering. 2026, 46(10): 1-8.
    For boiler state monitoring in complex environment, a single sensor often fails to provide comprehensive and accurate information. A monitoring method based on multisensor fusion was proposed, which enhanced system performance by integrating data from different types of sensors. The principles of system construction and the theories and optimization strategies of data fusion algorithms, such as Kalman filtering and KalmanNet, were analyzed. Results show that multisensor fusion significantly reduces prediction errors, with Kalman filtering reducing the mean square error of sensor predictions by 37% to 50% and KalmanNet improving accuracy by over 60%. In terms of overall model performance, KalmanNet with adaptive feedback achieves an accuracy of 93.2%. Despite its higher computational cost, KalmanNet demonstrates superior precision and robustness under complex state monitoring. The proposed multisensor fusion method not only improves state estimation accuracy and system stability but also offers significant application value for industrial safety monitoring.
  • Journal of Chinese Society of Power Engineering. 2026, 46(10): 9-17,51.
    With the development of coal-fired power transformation, there is an increasing need for large-scale scheduling and other macro decision-making in the power grid. Previous reliability prediction methods for single units cannot meet the power grid's demand for reliability information of unit sets. In order to accurately and efficiently predict the reliability of coal-fired power unit sets, a reliability prediction model of unit sets based on Apriori algorithm optimized back propagation (BP) neural network input (Apriori-BP) was proposed. The Apriori algorithm measured the correlation between the influencing factors and the prediction target based on their impact, which could more accurately measure the overall correlation between the composite influencing factors and the prediction target, thereby better optimizing the model input. Apply the Apriori-BP prediction model to the actual power grid, predict the reliability of multiple different sets of units, and compare the prediction errors with the grey relational analysis (GRA)-BP model and principal components analysis (PCA)-BP model. Results indicate that the Apriori-BP model has the highest prediction accuracy, with root mean square error and mean absolute error of 0.021 4 and 0.009 7, and better generalization ability and robustness.