收藏切换
Thermal Performance Optimization Analysis of a 100 MW Class Allam Cycle Power Generation System
收藏切换
Journal of Chinese Society of Power Engineering | 2026, 46(10) : 186 - 195
Less
收藏切换
Journal of Chinese Society of Power Engineering | 2026, 46(10): 186-195
Thermal Performance Optimization Analysis of a 100 MW Class Allam Cycle Power Generation System
Full
ZHAO Feng1, CHEN Yilun1, HAO Ning1
Affiliations
    1 Shanghai Power Equipment Research Institute Co., Ltd., Shanghai 200240, China
doi: 10.19805/j.cnki.jcspe.2026.250390
Outline
收藏切换
The Allam cycle is a power cycle fueled by natural gas using supercritical carbon dioxide as the working fluid, characterized by extremely high cycle efficiency, a near 100% carbon dioxide capture rate, and the potential for near-zero system emissions. A thermodynamic calculation model of the Allam cycle was developed, and a sensitivity analysis was conducted regarding the impacts of turbine inlet and outlet parameters, turbine cooling gas temperature, isentropic efficiency of power equipment, and the minimum cycle temperature on the system cycle efficiency. Based on the optimization results, a parameter scheme for a 100 MW class Allam cycle was proposed. The results indicate that the influence of turbine inlet pressure, inlet temperature, and outlet pressure on cycle efficiency exhibits a non-monotonic relationship. Effectively utilizing turbine exhaust waste heat and increasing the cooling gas temperature can improve the system cycle efficiency. Among the system power equipment, compared with the influence of compressor isentropic efficiency, turbine isentropic efficiency has a greater impact on the system cycle efficiency, with every 1 percentage point increase in turbine isentropic efficiency resulting in 0.32 percentage points increase in system cycle efficiency. Under the conditions of a turbine inlet pressure of 28 MPa, inlet temperature of 1 150 ℃, outlet pressure of 3.8 MPa, and a minimum cycle temperature of 24 ℃, the system cycle efficiency reaches 54.22%.
Allam cycle  /  supercritical carbon dioxide cycle  /  carbon dioxide capture and storage  /  thermodynamic analysis
赵峰, 陈逸伦, 郝宁. 100 MW级Allam循环发电系统热力性能优化分析. 动力工程学报, 2026 , 46 (10) : 186 -195 . DOI: 10.19805/j.cnki.jcspe.2026.250390
ZHAO Feng, CHEN Yilun, HAO Ning. Thermal Performance Optimization Analysis of a 100 MW Class Allam Cycle Power Generation System[J]. Journal of Chinese Society of Power Engineering, 2026 , 46 (10) : 186 -195 . DOI: 10.19805/j.cnki.jcspe.2026.250390
Year 2026 volume 46 Issue 10
96
19
Cite this Article
BibTeX
Article Info
doi: 10.19805/j.cnki.jcspe.2026.250390
  • Receive Date:2025-06-26
  • Online Date:2026-11-06
Article Data
Affiliations
History
  • Received:2025-06-26
  • Revised:2025-07-15
Affiliations
References
Share
https://castjournals.cast.org.cn/joweb/dlgcxb/EN/10.19805/j.cnki.jcspe.2026.250390
Share to
QR

Scan QR to access full text

Cite this article
BibTeX
Citations
表12种不同金属材料的力学参数
科
Family
属数
Number of
genus
种数
Number of
species
占总种数比例
Percentage of
total species (%)
属
Genus
种数
Number of
species
占总种数比例
Percentage of total
species (%)
鹅膏菌科Amanitaceae 2 11 5.26 鹅膏菌属 Amanita 10 4.78
小菇科 Mycenaceae 2 12 5.74 丝盖伞属 Inocybe 5 2.39
多孔菌科 Polyporaceae 8 14 6.70 蜡蘑属 Laccaria 5 2.39
红菇科 Russulaceae 3 23 11.00 小皮伞属 Marasmius 6 2.87
小菇属 Mycena 11 5.26
光柄菇属 Pluteus 5 2.39
红菇属 Russula 17 8.13
栓菌属 Trametes 5 2.39
关闭全屏
  • BibTeX
  • EndNote
  • RefWorks
  • TxT