收藏切换
Study on Modeling and Operation Characteristics of Pulverized-coal Preparation System with Medium Speed Coal Mill for Coal-fired Units
收藏切换
Journal of Chinese Society of Power Engineering | 2026, 46(1) : 32 - 41,50
Less
收藏切换
Journal of Chinese Society of Power Engineering | 2026, 46(1): 32-41,50
Study on Modeling and Operation Characteristics of Pulverized-coal Preparation System with Medium Speed Coal Mill for Coal-fired Units
Full
Affiliations
Published: 2026-01-15 doi: 10.19805/j.cnki.jcspe.2026.240619
Outline
收藏切换
Establishing an accurate model of the pulverized-coal preparation system and analyzing its operational characteristics are the key theoretical foundations for optimizing the system operational control. By incorporating the coupling relationship between the internal coal inventory of the coal mill and its operational parameters, and considering the impact of pulverized coal fineness on the output capacity of the coal pulverizing system, a gray box model of pulverized-coal preparation system with roller-type medium speed coal mills, encompassing key equipment such as coal mills, primary air fans, and coal conveying pipelines, was constructed. Based on this model, the steady-state operational characteristics of the pulverized-coal preparation system under single-parameter and fixed air-to-coal ratio conditions, as well as its dynamic operational characteristics during the startup process, were analyzed. Results indicate that when the coal feed rate (mass flow rate) increases from 12 kg/s to 26 kg/s, the specific energy consumption for coal grinding decreases from 10.26 kW·h/t to 7.14 kW·h/t, representing a reduction of 30.4%. Under a fixed air-coal ratio, the primary air temperature and the mass fraction of moisture in raw coal are identified as the key factors determining the outlet temperature of pulverized coal. When the air-coal ratio is 1.6 and the primary air temperature rises from 260 ℃ to 300 ℃, the outlet air-coal mixture temperature increases by 19.03%. During the load-increasing process, the output capacity of the coal pulverizing system is delayed by 102 s.
medium speed coal mill  /  pulverized-coal preparation system  /  particle size distribution model  /  pulverized coal fineness  /  gray box model
. 燃煤机组中速磨煤机制粉系统建模及运行特性研究. 动力工程学报, 2026 , 46 (1) : 32 -41,50 . DOI: 10.19805/j.cnki.jcspe.2026.240619
. Study on Modeling and Operation Characteristics of Pulverized-coal Preparation System with Medium Speed Coal Mill for Coal-fired Units[J]. Journal of Chinese Society of Power Engineering, 2026 , 46 (1) : 32 -41,50 . DOI: 10.19805/j.cnki.jcspe.2026.240619
Year 2026 volume 46 Issue 1
60
18
Cite this Article
BibTeX
Article Info
doi: 10.19805/j.cnki.jcspe.2026.240619
  • Receive Date:2024-10-08
  • Online Date:2026-11-05
  • Published:2026-01-15
Article Data
Affiliations
History
  • Received:2024-10-08
  • Revised:2024-11-01
Funding
Affiliations
References
Share
https://castjournals.cast.org.cn/joweb/dlgcxb/EN/10.19805/j.cnki.jcspe.2026.240619
Share to
QR

Scan QR to access full text

Cite this article
BibTeX
Citations
表12种不同金属材料的力学参数
科
Family
属数
Number of
genus
种数
Number of
species
占总种数比例
Percentage of
total species (%)
属
Genus
种数
Number of
species
占总种数比例
Percentage of total
species (%)
鹅膏菌科Amanitaceae 2 11 5.26 鹅膏菌属 Amanita 10 4.78
小菇科 Mycenaceae 2 12 5.74 丝盖伞属 Inocybe 5 2.39
多孔菌科 Polyporaceae 8 14 6.70 蜡蘑属 Laccaria 5 2.39
红菇科 Russulaceae 3 23 11.00 小皮伞属 Marasmius 6 2.87
小菇属 Mycena 11 5.26
光柄菇属 Pluteus 5 2.39
红菇属 Russula 17 8.13
栓菌属 Trametes 5 2.39
关闭全屏
  • BibTeX
  • EndNote
  • RefWorks
  • TxT