Journal of Chinese Society of Power Engineering
|
2026, 46(1): 1-9
Simulation Study on Dynamic Response Characteristics of Cooling Wall in Ultra-supercritical Boiler
Full
Affiliations
Published: 2026-01-15
doi: 10.19805/j.cnki.jcspe.2026.240620
Outline
In order to study the dynamic characteristics of the cooling wall in the ultra-supercritical boiler, a dynamic simulation model of the cooling wall in a 1 100 MW ultra-supercritical boiler was established under the condition that the heat load distribution along the height of the cooling wall was uneven. The distribution of the working fluid temperature and the metal wall temperature along the height of the cooling wall were simulated. The dynamic response characteristics of the main thermodynamic parameters of the working fluid and the metal wall temperature were analyzed when the flow rate at the cooling wall inlet was step-disturbed. Results show that under the design condition of 50%THA(turbine heat acceptance), the dryness of the working fluid at the height of 37.5 m in the cooling wall reaches 0.994, and the inner wall temperature reaches up to 466.1 ℃. At 30%THA, the peak temperature of the inner wall at 42.0 m reaches 375.3 ℃. The larger the flow steps, the longer the dynamic response time is, the heat transfer deterioration is aggravated, and the wall temperature in the evaporation and drying region increases. At 50%THA, after the flow step is reduced by 5.0%, the wall temperature at 36.0 m reaches 547.9 ℃ in this process, and no overheating occurs. After the flow stability, compared with the design flow, when the flow step is reduced by 2.5% and 5.0%, the inner wall temperature at 50%THA and 34.5 m will be increased by 5.6 and 17.2 K respectively.
ultra-supercritical boiler
/
dynamic response characteristic
/
metal wall temperature
/
cooling wall
.
超超临界锅炉水冷壁动态响应特性仿真研究.
动力工程学报,
2026
, 46
(1)
: 1
-9
.
DOI: 10.19805/j.cnki.jcspe.2026.240620
.
Simulation Study on Dynamic Response Characteristics of Cooling Wall in Ultra-supercritical Boiler[J].
Journal of Chinese Society of Power Engineering,
2026
, 46
(1)
: 1
-9
.
DOI: 10.19805/j.cnki.jcspe.2026.240620
Year 2026 volume 46 Issue 1
69
20
Cite this Article
BibTeX
Article Info
doi: 10.19805/j.cnki.jcspe.2026.240620
- Receive Date:2024-10-05
- Online Date:2026-11-05
- Published:2026-01-15